Lesson 11 of 12 · 20 min
Measuring ΔH by calorimetry
Find the enthalpy change of combustion, neutralisation and reactions in solution from temperature changes, with the right sign and per mole, then evaluate the method and use Hess's law.
What you will be able to do
- Calculate in from the mass of water, its temperature change and the amount of reactant.
- Give the correct sign: negative when the water warms, positive when it cools.
- Analyse data for heats of combustion, neutralisation and reactions in solution.
- Evaluate calorimetry results and combine equations with Hess's law.
You can't put a thermometer inside a molecule, but you can let a reaction exchange heat with a known mass of water and measure the water's temperature change. That is calorimetry. Two set-ups cover most school experiments:
- a coffee-cup calorimeter: an insulated polystyrene cup with a lid, for reactions in solution such as neutralisation, displacement or dissolving;
- a spirit burner under a metal can of water, for the heat of combustion of a liquid fuel.
A coffee-cup calorimeter. The polystyrene and lid reduce heat exchange with the surroundings.
Enthalpy change from calorimetry data
Find the heat exchanged with the water
, with the total mass of water or solution in grams and . Convert to kJ.
Find the moles that reacted
Use for the substance the equation is per mole of (the fuel, the limiting reactant, or the water formed in a neutralisation).
Divide and give the sign
. If the temperature rose, the reaction released heat: is negative. If it fell, is positive.
Key idea
Where the minus sign comes from
is the heat gained by the water. By conservation of energy, that heat came from the reaction, so the reaction's enthalpy fell by the same amount. If the water gains , the reaction's for that amount is .
Worked example
Heat of neutralisation from a coffee-cup calorimeter
50.0 mL of hydrochloric acid containing 0.0500 mol of HCl is mixed with 50.0 mL of sodium hydroxide solution containing 0.0500 mol of NaOH in a polystyrene cup. The temperature rises from 21.0 °C to 27.7 °C.
Calculate the heat of neutralisation, , in . Assume the solution has a density of and the specific heat capacity of water.
Step 1: Mass of solution
Total volume , so .
Both solutions end up in the cup and both warm up, so the heat goes into the whole 100.0 g.
Step 2: Heat gained by the solution
.
Step 3: Moles of water formed
, and the ratio is 1 : 1, so of water forms.
Step 4: Divide and give the sign
The solution warmed, so the reaction is exothermic:
is known to only two significant figures (6.7), so the answer has two.
Try it yourself first, then check the working one step at a time.
Answer
(the data value for a strong acid and strong base is about ).
Method
Mass = total volume of the mixed solutions, in grams.
, then convert to kJ.
Moles of water formed (or of the limiting reactant).
: negative when the solution warms.
Watch out for
Using 50.0 g, which halves .
Dividing by 0.100 mol (adding the moles of acid and base). The equation is per mole of water formed.
Common mistake
Use the total mass of water, in grams
In the example, 50.0 mL of acid was mixed with 50.0 mL of base. All 100.0 mL warmed up, so (taking the density of dilute solutions as and as that of water). Using only 50.0 g halves the answer; using 0.100 (litres or kg) makes it 1000 times too small.
Change the reaction, the mass of water, the amount of reactant and the share of heat lost. Watch , and update.
A student dissolves 8.00 g of ammonium nitrate, , in 60.0 g of water. The temperature falls from 23.5 °C to 13.2 °C.
Calculate for , in to three significant figures. Use the mass of water only.
Worked example
Heat of combustion of ethanol with a spirit burner
A spirit burner containing ethanol, , is used to heat 200.0 g of water in a copper can.
| Measurement | Value |
|---|---|
| Mass of burner before | 152.364 g |
| Mass of burner after | 151.424 g |
| Initial water temperature | 20.4 °C |
| Final water temperature | 42.6 °C |
(a) Calculate the heat of combustion of ethanol in .
(b) The data value is . Calculate the percentage error and suggest the main reason for it.
Step 1: Heat gained by the water
.
Step 2: Moles of ethanol burned
Mass burned . , so .
Step 3: Heat of combustion
Step 4: Percentage error
Step 5: Explain the error
The measured value is less negative, so a third of the heat released never reached the water. Most was lost to the air around the flame and to the can; some ethanol may also have burned incompletely (soot on the can) or evaporated from the wick.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) 33 %, mainly because heat was lost to the surroundings rather than absorbed by the water.
Method
for the water.
Moles of fuel from the burner's loss of mass.
; compare with the data value.
Watch out for
Using the mass of ethanol (0.940 g) as the in . That is the water.
Saying the error is "human error". Name the specific heat losses.
Evaluating calorimetry. Experimental values of are almost always less negative than data-book values for exothermic reactions, because some of the heat released never reaches the water. The main sources of error are systematic:
- heat lost to the air, the container, the thermometer and the clamp, especially from a spirit burner flame;
- incomplete combustion (soot on the can), so less energy is released per gram of fuel;
- evaporation of the fuel from the wick between weighings, so the mass "burned" is too high;
- for solutions, assuming the solution's density and specific heat capacity equal water's.
Improvements: a lid and insulation, a shield around the flame, a copper can close to the flame, stirring, and a temperature–time graph. Extrapolating the cooling line back to the time of mixing estimates the maximum temperature the solution would have reached with no heat loss.
Extrapolating the cooling line back to the moment of mixing (4 min) gives about 27.5 °C, so rather than the 6.2 °C read from the peak.
A student uses a spirit burner to find the heat of combustion of propan-1-ol and gets . The data value is . Which is the most likely main reason?
Hess's law. Some enthalpy changes can't be measured directly, such as the formation of magnesium oxide (it burns too fiercely to trap the heat) or the decomposition of calcium carbonate (it needs strong heating). Hess's law gets around this:
The enthalpy change for a reaction is the same whatever route it takes from the same reactants to the same products.
So you can measure two or three easy reactions in a coffee-cup calorimeter and add their thermochemical equations, like algebra, to get the one you want. Reverse an equation and its changes sign; multiply it and is multiplied too.
Worked example
Hess's law: the enthalpy change for forming
Burning magnesium is too fierce to measure in a calorimeter. Instead a student measures two reactions in a coffee-cup calorimeter and uses a data value for the third:
Use Hess's law to find for .
Step 1: Decide what each equation needs
The target has Mg on the left (so keep equation 1 as it is), MgO on the right (so reverse equation 2), and on the left (so keep equation 3).
Step 2: Reverse equation 2
,
Reversing a reaction reverses the sign of its enthalpy change.
Step 3: Add the three equations
, , and appear on both sides and cancel, leaving .
Step 4: Add the enthalpy changes
Step 5: Judge the result
The data value is about , within 1 %. Each measured value carries some heat-loss error, but because the reactions in the cup are quick and small, the errors are much smaller than for a spirit burner.
Try it yourself first, then check the working one step at a time.
Answer
for .
Method
Match each target species with the equation that contains it.
Reverse or multiply equations as needed, changing the same way.
Add, cancel species that appear on both sides, and add the values.
Watch out for
Adding without changing its sign after reversing the equation.
Summary
Calorimetry: with the total mass of water or solution in grams.
in : negative if the water warmed, positive if it cooled.
Divide by the moles of the substance the equation refers to: the fuel, the limiting reactant, or the water formed.
Heat loss and incomplete combustion make measured exothermic values less negative than data values.
Hess's law: add measured thermochemical equations to find an enthalpy change that is hard to measure directly.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.