Lesson 3 of 8 · 18 min

Volumes of revolution about the x-axis

Spin a region about the xx-axis, slice the solid into discs, and find its volume exactly with V=π∫[f(x)]2 dxV = \pi\int [f(x)]^2\,dx and the Topic 1 techniques.

What you will be able to do

  • Describe the solid formed by rotating a region about the xx-axis.
  • Explain why the volume is π∫ab[f(x)]2 dx\pi\int_a^b [f(x)]^2\,dx by summing discs.
  • Find volumes exactly, squaring the function correctly and choosing the right technique.

Take the region under y=xy = \sqrt{x} from x=0x = 0 to x=4x = 4 and spin it a full turn about the xx-axis. It sweeps out a solid shaped like the nose of a bullet. A lathe makes shapes like this: chair legs, bowls, nozzles. How much material is in it?

Slice the solid at right angles to the axis. Each slice is a thin disc: its radius is the height of the curve, yy, and its thickness is δx\delta x.

A strip of height yy and width δx\delta x sweeps out a disc of volume πy2 δx\pi y^2\,\delta x.

Key idea

Volume of revolution about the x-axis

When the region between y=f(x)y = f(x) and the xx-axis, from x=ax = a to x=bx = b, is rotated a full turn about the xx-axis, the solid has volume

V=π∫ab[f(x)]2 dxV = \pi\int_a^b [f(x)]^2\,dx

This is in the formula book. The square is there because each disc's face is a circle of area πr2\pi r^2 with r=f(x)r = f(x).

Why the formula works

Cut the solid into nn discs of thickness δx\delta x. The disc at xx has radius f(x)f(x), so its volume is about π[f(x)]2 δx\pi[f(x)]^2\,\delta x. Adding them,

V≈∑π[f(x)]2 δxV \approx \sum \pi[f(x)]^2\,\delta x

As δx→0\delta x \to 0 the approximation becomes exact, and the limit of the sum is the definite integral π∫ab[f(x)]2 dx\pi\int_a^b [f(x)]^2\,dx, exactly as an area is the limit of a sum of rectangles.

So a volume of revolution is just the area under the cross-sectional area function A(x)=π[f(x)]2A(x) = \pi[f(x)]^2.

Interactive

Volume as the area under π[f(x)]²

For y=xy = \sqrt{x}, each disc has face area A(x)=π(x)2=πxA(x) = \pi(\sqrt{x})^2 = \pi x. Each rectangle here is the volume of one disc. As nn grows, the total approaches the volume, 8π≈25.138\pi \approx 25.13.

The region under y=1xy = \frac{1}{x} from x=1x = 1 to x=3x = 3 is rotated about the xx-axis. Determine the exact volume of the solid.

Reads asYour answer shows here as maths.

Worked example

Volume when y=sin⁡(x)y = \sin(x) is rotated about the xx-axis

  • Simple familiar
  • Technology free

The region between y=sin⁡(x)y = \sin(x) and the xx-axis for 0≤x≤π0 \leq x \leq \pi is rotated about the xx-axis. Determine the exact volume of the solid.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Substitute into V=π∫ab[f(x)]2 dxV = \pi\int_a^b [f(x)]^2\,dx.

  2. Replace sin⁡2\sin^2 or cos⁡2\cos^2 with its double-angle identity.

  3. Integrate and evaluate exactly.

Watch out for

  • Integrating sin⁡(x)\sin(x) instead of sin⁡2(x)\sin^2(x), which gives 2π2\pi.

  • Writing sin⁡2(x)=12(1+cos⁡(2x))\sin^2(x) = \frac{1}{2}(1 + \cos(2x)): that is cos⁡2(x)\cos^2(x).

Common mistake

Squaring correctly

Square the whole function before you integrate. (x+1x)2=x2+2+1x2\left(x + \frac{1}{x}\right)^2 = x^2 + 2 + \frac{1}{x^2}, not x2+1x2x^2 + \frac{1}{x^2}; (x ex)2=xe2x\left(\sqrt{x}\,e^x\right)^2 = xe^{2x}, not xex2xe^{x^2}; and [sec⁡(x)]2=sec⁡2(x)[\sec(x)]^2 = \sec^2(x) integrates directly to tan⁡(x)\tan(x). Forgetting the square altogether gives an area, with square units, not a volume.

Worked example

A volume that needs partial fractions

  • Complex familiar
  • Technology free

The region under y=1(x+1)(x+3)y = \frac{1}{\sqrt{(x + 1)(x + 3)}} for 0≤x≤10 \leq x \leq 1 is rotated about the xx-axis. Show that the volume of the solid is π2ln⁡(32)\frac{\pi}{2}\ln\left(\frac{3}{2}\right).

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Square f(x)f(x) and simplify.

  2. Use partial fractions when the denominator has two distinct linear factors.

  3. Integrate each term to a logarithm and combine with the log laws.

Watch out for

  • Forgetting that squaring 1u\frac{1}{\sqrt{u}} gives 1u\frac{1}{u}, not 1u2\frac{1}{u^2}.

  • In a "show that", skipping the log-law step. Every line must be visible.

The region under y=11+x2y = \frac{1}{\sqrt{1 + x^2}} from x=0x = 0 to x=3x = \sqrt{3} is rotated about the xx-axis. Determine the exact volume.

Reads asYour answer shows here as maths.
Proof: the volume of a cone

A cone of base radius rr and height hh is made by rotating the line y=rhxy = \frac{r}{h}x, for 0≤x≤h0 \leq x \leq h, about the xx-axis.

V=π∫0hr2h2x2 dx=πr2h2[x33]0h=πr2h2×h33=13πr2hV = \pi\int_0^h \frac{r^2}{h^2}x^2\,dx = \frac{\pi r^2}{h^2}\left[\frac{x^3}{3}\right]_0^h = \frac{\pi r^2}{h^2} \times \frac{h^3}{3} = \frac{1}{3}\pi r^2 h

Rotating the semicircle y=r2−x2y = \sqrt{r^2 - x^2}, −r≤x≤r-r \leq x \leq r, gives the sphere, V=π∫−rr(r2−x2) dx=43πr3V = \pi\int_{-r}^{r} (r^2 - x^2)\,dx = \frac{4}{3}\pi r^3, in the same way.

Exam tip

Set it up, then simplify

Write V=π∫ab[f(x)]2 dxV = \pi\int_a^b [f(x)]^2\,dx with your function substituted and squared, then simplify the integrand before integrating. For a "show that" question, every line of the simplification must appear. State cubic units, or cm3\text{cm}^3 in context.

Summary

  • Rotating a region about the xx-axis slices into discs of volume πy2 δx\pi y^2\,\delta x.

  • V=π∫ab[f(x)]2 dxV = \pi\int_a^b [f(x)]^2\,dx, in the formula book.

  • Square the whole function first, then pick the technique: identities, logarithms, partial fractions, inverse tangent or parts.

  • The volume is the area under the cross-sectional area function π[f(x)]2\pi[f(x)]^2.

  • The cone and sphere formulas both follow from this one integral.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 80% read

Save your progress with a free account