Lesson 2 of 8 · 18 min

Regions that cross, and integrating with respect to y

Split an area integral wherever the curves cross, integrate with respect to y when the region is easier to describe sideways, and use technology for intersections you cannot find by hand.

What you will be able to do

  • Find every intersection between the terminals and split the area integral there.
  • Use symmetry to halve the work when the region is symmetric.
  • Find an area with respect to yy as ∫cd(xright−xleft) dy\int_c^d (x_{\text{right}} - x_{\text{left}})\,dy.
  • Use technology to find intersections and evaluate area integrals, and say what you did.

Try this: ∫−11(x1+x2−x2)dx=0\int_{-1}^{1} \left(\frac{x}{1 + x^2} - \frac{x}{2}\right)dx = 0. Yet the two curves clearly enclose some area. What went wrong?

An integral adds signed heights. Where x1+x2\frac{x}{1 + x^2} is on top the strips count as positive; where x2\frac{x}{2} is on top they count as negative. Here the two pieces are the same size, so they cancel exactly.

The curves y=x1+x2y = \frac{x}{1 + x^2} and y=x2y = \frac{x}{2} cross three times. Which curve is on top changes at x=0x = 0.

Key idea

Split at every crossing

If the curves cross at x=cx = c between aa and bb, find each piece with top minus bottom and add:

A=∫ac(g(x)−f(x)) dx+∫cb(f(x)−g(x)) dxA = \int_a^c \big(g(x) - f(x)\big)\,dx + \int_c^b \big(f(x) - g(x)\big)\,dx

Equivalently, A=∫ab∣f(x)−g(x)∣ dxA = \int_a^b |f(x) - g(x)|\,dx, which is how you can enter it on a graphics calculator.

Worked example

Total area between y=x1+x2y = \frac{x}{1 + x^2} and y=x2y = \frac{x}{2}

  • Complex familiar
  • Technology free

Determine the exact total area of the regions enclosed by y=x1+x2y = \frac{x}{1 + x^2} and y=x2y = \frac{x}{2}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Factorise to find every intersection, including x=0x = 0.

  2. Split the area at each crossing, or use symmetry.

  3. Integrate top minus bottom on each piece and add the positive areas.

Watch out for

  • Integrating from −1-1 to 11 in one go and getting 00.

  • Writing ∫x1+x2 dx=ln⁡(1+x2)\int \frac{x}{1 + x^2}\,dx = \ln(1 + x^2) without the 12\frac{1}{2}.

Determine the exact total area between y=sin⁡(x)y = \sin(x) and y=cos⁡(x)y = \cos(x) for 0≤x≤π20 \leq x \leq \frac{\pi}{2}.

Reads asYour answer shows here as maths.

Common mistake

Missing a crossing

Solving f(x)=g(x)f(x) = g(x) can give more solutions than you expect. With x1+x2=x2\frac{x}{1 + x^2} = \frac{x}{2}, dividing both sides by xx loses the solution x=0x = 0. Rearrange to x(…)=0x(\ldots) = 0 and factorise instead.

Integrating with respect to yy. Some regions are awkward in vertical strips but easy in horizontal ones. Take the region between y=ln⁡(x)y = \ln(x), the yy-axis, and the lines y=0y = 0 and y=1y = 1. In vertical strips it needs two integrals and the integral of ln⁡(x)\ln(x). In horizontal strips, each strip runs from the yy-axis (x=0x = 0) to the curve (x=eyx = e^y).

Horizontal strips run from x=0x = 0 to x=eyx = e^y, so A=∫01ey dy=e−1A = \int_0^1 e^y\,dy = e - 1.

Key idea

Area with respect to y

If x=p(y)x = p(y) is to the right of x=q(y)x = q(y) for c≤y≤dc \leq y \leq d, then

A=∫cd(p(y)−q(y)) dyA = \int_c^d \big(p(y) - q(y)\big)\,dy

Rewrite each curve as xx in terms of yy, and use yy-values as the terminals. Right minus left plays the part of top minus bottom.

Determine the exact area of the region bounded by y=ln⁡(x)y = \ln(x), the yy-axis and the lines y=0y = 0 and y=2y = 2.

Reads asYour answer shows here as maths.

Without technology

Solve f(x)=g(x)f(x) = g(x) exactly, by factorising or using known exact values. Find an antiderivative with a Topic 1 technique, then evaluate exactly. Leave the answer in terms of π\pi, ee, surds and logarithms.

With technology

Graph both curves and use the intersection tool to find the terminals; store them rather than retyping rounded values. Then evaluate ∫ab∣f(x)−g(x)∣ dx\int_a^b |f(x) - g(x)|\,dx with the numerical integration tool. Write the integral you evaluated, and round only at the end.

Worked example

Area enclosed by y=cos⁡(x)y = \cos(x) and y=x2y = x^2, with technology

  • Complex familiar
  • Technology active

The curves y=cos⁡(x)y = \cos(x) and y=x2y = x^2 enclose a region. Use technology to determine its area, correct to three decimal places.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Graph both curves and find the intersections with technology; store them.

  2. Write the area integral with the stored terminals.

  3. Evaluate numerically, then round.

  4. Check the size against a simple rectangle.

Watch out for

  • Rounding the terminals to ±0.82\pm 0.82 before integrating, which changes the third decimal place.

  • Leaving the calculator in degrees.

Exam tip

Show the set-up, even with technology

"Use technology" does not mean "write only the answer". Markers want the intersection points, the integral with its terminals, and a statement such as "using the numerical integration function". Store intersections to full accuracy: rounding x=0.8241x = 0.8241 to 0.820.82 before integrating changes the third decimal place.

Summary

  • Find every intersection between the terminals, and integrate top minus bottom on each piece separately.

  • A net integral of zero does not mean zero area: signed pieces can cancel.

  • Factorise rather than divide when solving f(x)=g(x)f(x) = g(x), so you keep every solution.

  • Horizontal strips give A=∫cd(xright−xleft) dyA = \int_c^d (x_{\text{right}} - x_{\text{left}})\,dy, with yy-terminals.

  • With technology, find intersections, integrate ∣f−g∣|f - g|, and state what you did.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 80% read

Save your progress with a free account