Lesson 4 of 8 · 13 min

Loudness, pitch and timbre

Link the amplitude, frequency and complexity of a sound wave to the loudness, pitch and timbre you hear, and work with decibels, hertz and octaves.

What you will be able to do

  • Distinguish the physical properties of a sound wave (amplitude, frequency, complexity) from the psychological qualities they produce (loudness, pitch, timbre).
  • Use the decibel scale and the hertz scale, including octaves.
  • Explain how the cochlea codes loudness and pitch, and why two instruments playing the same note sound different.

A violin and a flute play the same note at the same volume. You still know at once which is which. Three qualities describe what you hear in any sound, and each depends mainly on one property of the sound wave.

What you hear, and what in the wave produces it
Psychological qualityPhysical propertyUnitHow the cochlea codes it
Loudness: how loud or softAmplitude: the size of the pressure changeDecibels (dB)Bigger vibrations of the basilar membrane, so hair cells and nerve fibres fire faster and more of them fire
Pitch: how high or lowFrequency: vibrations per secondHertz (Hz)Where the basilar membrane vibrates most (high at the base, low at the apex), and for low sounds the timing of the impulses
Timbre: the quality or "colour" of the soundComplexity: the mix of frequencies (harmonics) in the waveNo single unitThe pattern of activity across many places on the basilar membrane at once

Amplitude (loudness), frequency (pitch) and complexity (timbre). The complex wave repeats at the same rate as the pure tone, so it has the same pitch.

Loudness and the decibel scale

Loudness rises with amplitude, but your ear handles an enormous range: a sound at the threshold of pain is more than a million million times as intense as the faintest sound you can hear. So sound levels are measured on the logarithmic decibel scale: every 10 dB is ten times the intensity. A rise of about 10 dB is heard as roughly twice as loud.

Loudness also depends on frequency. Hearing is most sensitive between about 2000 and 5000 Hz, the range of many speech sounds, so a sound there seems louder than a low hum of the same intensity.

Typical sound levels (approximate)
SoundLevel
Threshold of hearing for a young adult0 dB
Quiet library30–40 dB
Normal conversationabout 60 dB
Busy trafficabout 80 dB
Lawn mowerabout 90 dB
Rock concert, chainsawabout 110 dB
Threshold of painabout 120–130 dB

Note

Protecting your hair cells

Hair cells destroyed by loud sound do not grow back. Safe Work Australia's workplace exposure standard is 85 dB(A) averaged over eight hours, and each 3 dB above that halves the safe time. Headphones at full volume can exceed 100 dB.

A sound at a concert is measured at 100 dB. Conversation is about 60 dB. How many times more intense is the concert sound than the conversation?

Pitch and the hertz scale

Pitch rises with frequency. A young person hears from about 20 Hz to 20 000 Hz, and the upper limit falls with age as hair cells near the base of the cochlea are lost. The A that orchestras tune to is 440 Hz.

Pitch works by ratios: doubling the frequency raises the pitch by one octave, which sounds like "the same note, higher". So 220 Hz, 440 Hz and 880 Hz are three A's an octave apart, even though the second gap is twice the first in hertz.

The cochlea codes pitch in two ways. For most frequencies, where on the basilar membrane the vibration peaks tells the brain the pitch (high at the base, low at the apex). For low frequencies, nerve fibres also fire in time with the wave, so the timing of the impulses carries the pitch too.

A note has a frequency of 330 Hz. What is the frequency of the note two octaves higher?

in Hz

Timbre

Almost every real sound is complex: a mix of a lowest frequency, the fundamental, which sets the pitch, and harmonics at whole-number multiples of it (two, three, four times the frequency…). Instruments differ in which harmonics they produce and how strongly, and in how each note starts and fades. That pattern is timbre. A tuning fork produces an almost pure tone, a single frequency, which is why it sounds plain.

Interactive

Change a sound's loudness, pitch and timbre

Sound plays only when you press Play, at a limited volume. Watch how each slider changes the wave.

Which quality of sound mainly changes in each case?

Worked example

Explain why a violin and a flute sound different

  • Simple familiar

A violin and a flute both play the A at 440 Hz, equally loudly. Explain why a listener perceives the same pitch and loudness but can still tell the instruments apart. (3 marks)

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Match each quality to its property: loudness to amplitude, pitch to frequency, timbre to complexity.

Watch out for

  • Saying the violin has a "higher pitch" because it sounds brighter. Brightness here is timbre.

Worked example

Compare sound levels in decibels

  • Simple familiar

A student's headphones produce 95 dB at full volume, and 65 dB at the volume their parent suggests.

(a) How many times more intense is the sound at full volume? (b) About how many times louder does it sound? (c) Explain why the difference matters for hearing.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the decibel difference.

  2. Each 10 dB multiplies intensity by 10 and loudness by about 2.

Watch out for

  • Writing 30 times, or 95÷6595 \div 65. Decibels are logarithmic.

Common mistake

Physical and psychological words

Exam answers lose marks for "the pitch of the wave is 440 Hz" or "the sound has more loudness in decibels". Keep the two vocabularies apart: the wave has amplitude, frequency and complexity; the listener hears loudness, pitch and timbre. Then link them: "the greater amplitude is perceived as greater loudness".

Summary

  • Loudness depends mainly on amplitude and is measured in decibels; each 10 dB is ten times the intensity and sounds roughly twice as loud.

  • Pitch depends mainly on frequency, measured in hertz; humans hear about 20–20 000 Hz, and doubling the frequency raises the pitch an octave.

  • Timbre depends on the complexity of the wave: the mix and strength of the harmonics above the fundamental.

  • The cochlea codes pitch by place on the basilar membrane (and by timing for low sounds) and loudness by firing rate and the number of fibres firing.

  • Hair cells lost to loud noise do not regrow; the Australian workplace standard is 85 dB(A) over eight hours.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 4 of 80% read

Save your progress with a free account