Lesson 9 of 10 · 18 min
Electron volts and mass–energy equivalence
Convert between electron volts and joules, and use to calculate the energy released when mass decreases in decay, fission and fusion.
What you will be able to do
- Describe the electron volt and convert between eV, MeV and J.
- Describe mass–energy equivalence.
- Use to calculate the energy released in a nuclear reaction from the masses involved.
A joule is a sensible unit for a kettle, but a single alpha particle carries about J. Writing powers of ten all the time gets clumsy, so nuclear and particle physicists use a much smaller unit of energy, the electron volt.
Definition
The electron volt
One electron volt (eV) is the energy an electron gains when it is accelerated through a potential difference of 1 volt: .
- eV → J: multiply by .
- J → eV: divide by .
Chemical reactions involve a few eV per atom; nuclear reactions involve millions (MeV). That factor of about a million is why a kilogram of nuclear fuel is worth millions of kilograms of coal.
Worked example
Convert between MeV and joules
(a) An alpha particle from radium-226 has a kinetic energy of 4.78 MeV. Express this in joules.
(b) A beta particle has a kinetic energy of J. Express this in keV.
Step 1: (a) Convert MeV to eV
Step 2: (a) Multiply by the joules per electron volt
Step 3: (b) Divide by the joules per electron volt
Step 4: (b) Convert to keV
Try it yourself first, then check the working one step at a time.
Answer
(a) J. (b) 150 keV.
Method
eV → J: multiply by .
J → eV: divide by .
k = , M = .
Watch out for
Multiplying when going from J to eV: the answer in eV should be a much bigger number than in J.
A gamma ray from cobalt-60 has an energy of 1.33 MeV. Calculate its energy in joules.
In 1905 Albert Einstein showed that mass and energy are not separate quantities. Mass is a very concentrated form of energy, and whenever a system gains or loses energy, its mass changes by an amount . Because is so large (), a tiny mass corresponds to an enormous energy.
Calculate the energy equivalent of 1.0 g of mass.
Key idea
Where the energy of a nuclear reaction comes from
In every nuclear reaction that releases energy, the total mass of the products is less than the total mass of the reactants. The "missing" mass has not vanished: it has become the kinetic energy of the products and the energy of any gamma rays.
Masses of nuclei are usually given in atomic mass units (u): . With the data book values, 1 u of mass is equivalent to MeV.
Energy released in a nuclear reaction
Add the masses on each side
Keep every decimal place you are given.
Subtract to find the mass decrease
(positive if energy is released).
Convert to kilograms
Multiply a mass in u by .
Use
The answer is in joules.
Convert to MeV if asked
Divide by J per MeV. Round only now.
Worked example
Energy released in the alpha decay of radium-226
Radium-226 decays by alpha emission: .
The masses are: radium-226, 226.025410 u; radon-222, 222.017578 u; helium-4, 4.002603 u.
Calculate the energy released in one decay, in joules and in MeV.
Step 1: Find the mass of the products
Step 2: Find the mass decrease
The products are lighter than the parent; the difference has become energy.
Step 3: Convert to kilograms
Step 4: Use ΔE = Δmc²
Step 5: Convert to MeV
Try it yourself first, then check the working one step at a time.
Answer
About J, or 4.88 MeV, per decay.
Method
Mass before minus mass after (all digits).
× to get kg.
× to get J; ÷ to get MeV.
Watch out for
Rounding the masses to 3 significant figures before subtracting, which makes zero.
The alpha particle carries away most of this energy (4.78 MeV); the radon nucleus recoils with the rest, so the alpha's kinetic energy is a little less than the energy released.
Compare the mass before and after the deuterium–tritium reaction. How much mass disappears, and where does the energy go?
Worked example
Energy released by deuterium–tritium fusion
In a fusion reactor, deuterium and tritium fuse: .
Masses: 2.014102 u, 3.016049 u, 4.002603 u, 1.008665 u.
Calculate the energy released per reaction in MeV.
Step 1: Total mass of the reactants
Step 2: Total mass of the products
Step 3: Mass decrease
Step 4: Energy in joules
Step 5: Energy in MeV
Try it yourself first, then check the working one step at a time.
Answer
About 17.6 MeV ( J) per reaction.
Method
Total each side, then subtract.
Convert u → kg, use , convert J → MeV.
Watch out for
Leaving out the neutron from the products.
Note
Atomic or nuclear masses?
Tables usually list atomic masses, which include the electrons. In alpha decay, fission and fusion, the number of electrons is the same on both sides, so their masses cancel and you can use atomic masses directly. Exam questions give you the masses to use; use them exactly as given.
Common mistake
Rounding too early
Mass differences in nuclear reactions are tiny compared with the masses themselves: 0.005 u out of 226 u. If you round the masses to 3 significant figures before subtracting, the difference becomes zero. Subtract first with every digit, then convert and round the final answer.
Summary
and .
Mass and energy are equivalent: , with in kg.
In a nuclear reaction that releases energy, the products have less mass than the reactants; the mass difference becomes kinetic energy and gamma radiation.
Convert u to kg with ; 1 u is equivalent to about 934 MeV with data book values.
Subtract masses with all their digits before you round.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.