Lesson 5: Ohmic and non-ohmic conductors

Resistance of a filament lamp from its I–V graph

SkillsOhmic and non-ohmic conductorsResistance and Ohm's law

Worked example

  • Complex familiar
  • Technology active

The graph shows the I–V characteristic of a 12 V car lamp. (a) Determine the lamp's resistance at 4.0 V and at 12 V. (b) Explain the difference.

1 of 4 steps
  1. Step 1: Read the current at 4.0 V

    From the graph, I=0.20 AI = 0.20\unit{A} when V=4.0 VV = 4.0\unit{V}.

Try a similar one

A fresh question of the same kind, checked as you answer, with hints and a full solution.

Method

  1. Read V and I at the point from the graph.

  2. Divide V by I at that point.

  3. Explain changes in resistance with temperature and collisions.

Watch out for

  • Using ΔVΔI=12−4.00.30−0.20=80 Ω\frac{\Delta V}{\Delta I} = \frac{12 - 4.0}{0.30 - 0.20} = 80\unit{\Omega}, which is not the resistance at either point.

  • Using the gradient of the curve, which on an I–V graph isn't the resistance at all.

Save your progress with a free account