Lesson 6: Finding resistance from a V–I graph
Resistance and its uncertainty from a V–I graph
SkillResistance from V–I graphs
Worked example
A student measured the potential difference across a resistor labelled 47 Ω at five currents. Each voltage reading is uncertain by ±0.1 V. The graph shows the data with error bars, the line of best fit, and the steepest and shallowest lines through the error bars. Determine the resistance with its absolute and percentage uncertainty, and decide whether the result agrees with the labelled value.
Step 1: Gradient of the line of best fit
Two points far apart on the line are and :
On a graph of V against I, the gradient is , the resistance.
Step 2: Gradient of the steepest line
It runs from to : .
Step 3: Gradient of the shallowest line
It runs from to : .
Step 4: Absolute uncertainty
Step 5: Percentage uncertainty
Step 6: Compare with the label
The labelled 47 Ω lies inside to , so the result agrees with it. The percentage error is .
Answer
(rounded, ), a percentage uncertainty of 5.3%. The labelled 47 Ω lies within this range, so the measurement agrees with it.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Gradient of the line of best fit from two far-apart points on the line.
Gradients of the steepest and shallowest lines through all the error bars.
Uncertainty is half their difference; percentage uncertainty is that over the best value.
Agreement means the accepted value lies within the uncertainty range.
Watch out for
Calculating the gradient from two data points instead of two points on the line.
Quoting the full spread, 5 Ω, as the uncertainty instead of half of it.