Lesson 9: Combination circuits and Kirchhoff's laws
Using Kirchhoff's laws with meter readings
SkillsKirchhoff's lawsSeries–parallel circuits
Worked example
In the circuit shown, ammeter reads 0.60 A, ammeter reads 0.25 A and the voltmeter across lamp X reads 3.5 V. The battery provides 9.0 V and the lamps are non-ohmic. Find (a) the current through lamp Z, (b) the potential difference across lamps Y and Z, and (c) the power of each lamp.
Step 1: Use the current law at the junction
The 0.60 A arriving at the junction must all leave it, split between lamps Y and Z.
Step 2: Use the voltage law round a loop
, so . Z is in parallel with Y, so too.
Round the loop through the battery, X and Y, the potential differences across the loads add to the 9.0 V supplied.
Step 3: Find each power with
, ,
Step 4: Check energy in equals energy out
The battery supplies , and .
Answer
(a) . (b) across each. (c) X 2.1 W, Y 1.4 W, Z 1.9 W.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Current law at a junction for unknown currents.
Voltage law round a loop for unknown potential differences.
for each component, then check the powers add to the supply's.
Watch out for
Trying to use resistances. You don't need them, and with non-ohmic lamps you couldn't assume them anyway; Kirchhoff's laws work for any components.
Halving 5.5 V between Y and Z. Components in parallel each have the full potential difference across them.