Lesson 4 of 7 · 15 min
Scale drawings and ratio scales
Write a scale as a ratio 1 : n, and use it to convert between lengths on a scale drawing or model and real lengths.
What you will be able to do
- Explain what a ratio scale such as means.
- Write a scale given in words or mixed units in the form .
- Convert drawing or model lengths to real lengths, and real lengths to drawing lengths.
A 1:18 model car on a shelf, an architect's drawing of a deck and the instructions for a flat-pack bookcase are all scale drawings: every real length has been multiplied by the same small number. Because they are similar to the real thing, one number, the scale, tells you every real length.
Definition
Ratio scales
A scale written means 1 unit on the drawing represents of the same units in real life. The units cancel, so the scale has none.
- means 1 cm on the drawing is 50 cm in real life (and 1 mm is 50 mm).
- , and .
- The scale factor from the real object to the drawing is ; from the drawing to the real object it is .
Front of a garden shed, drawn at a scale of . Lengths shown are measured on the drawing.
Use the scale drawing of the shed. How high is the top of the real shed's roof, in metres?
| From | To | Multiply by |
|---|---|---|
| km | m | 1000 |
| m | cm | 100 |
| cm | mm | 10 |
| km | cm | 100 000 |
| m | mm | 1000 |
Writing a scale in the form
Write both lengths in the same unit
Usually the smaller unit: "2 cm represents 5 m" becomes .
Drop the units and divide both sides by the first number
.
Check
On a plan, 2 cm should be cm m. It is.
On a plan, 1 cm represents 20 m. The scale is . Find .
Worked example
Write a scale as and use it
On a landscape designer's plan, 2.5 cm represents 5 m.
(a) Write the scale in the form .
(b) A retaining wall is 8.4 m long. How long is it on the plan?
Step 1: Write both lengths in centimetres
, so the scale is , or .
A ratio scale compares the same unit on both sides, so the units cancel.
Step 2: Divide both parts by 2.5
Step 3: Change the real length to centimetres
Step 4: Divide by 200 for the plan length
cm
The plan is 200 times smaller than real life.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) The wall is 4.2 cm long on the plan.
Method
Put both parts of the scale in the same unit, then divide by the first part.
Real → drawing: divide by . Drawing → real: multiply by .
Convert units before and after as needed.
Watch out for
Writing by ignoring the different units.
Multiplying 840 by 200 for the plan length. A plan is smaller than real life, so divide.
Worked example
Real and model lengths for a 1:18 model car
A die-cast model of a ute is made to a scale of . The model is 29.5 cm long.
(a) How long is the real ute, in metres?
(b) The real ute is 1.86 m tall. How tall is the model, correct to the nearest millimetre?
Step 1: Multiply the model length by 18
On a scale, each real length is 18 times the model length.
Step 2: Convert to metres
, a sensible length for a ute.
Step 3: Convert the real height to millimetres
Step 4: Divide by 18 and round
mm
Try it yourself first, then check the working one step at a time.
Answer
(a) The real ute is 5.31 m long. (b) The model is 103 mm (10.3 cm) tall.
Method
Model → real: multiply by .
Real → model: divide by .
Convert to the unit asked for, and check the size is sensible.
Watch out for
Dividing 29.5 by 18 to get 1.64 cm for the real ute. A real ute is bigger than its model.
Note
Scales that enlarge
Diagrams of very small things are drawn larger than life. A scale of means 10 units on the drawing represent 1 real unit, so the drawing is an enlargement with . Divide a drawing length by 10 to get the real length.
A textbook diagram of a green ant is drawn at a scale of . The ant is 7.5 cm long in the diagram. How long is the real ant, in millimetres?
Common mistake
Mixed units in a scale
"1 cm represents 5 m" is not . Both parts must be in the same unit: . Writing the scale with mixed units is fine in words, but convert before you calculate with it.
Summary
means 1 unit on the drawing represents of the same units in real life. The scale has no units.
Real length drawing length; drawing length real length .
To write a scale as , put both parts in the same unit, then divide by the first number.
A scale like enlarges: divide drawing lengths by 10 to get real lengths.
Check reasonableness: real objects should be a sensible size, such as a car about 4–5 m long.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.