Lesson 5 of 7 · 18 min

Maps and building plans

Take measurements from maps and building plans, convert them to real distances and areas, and use them to work out travel times and costs.

What you will be able to do

  • Use a ratio scale or a scale bar to find real distances from a map.
  • Read the dimensions on a building plan and find real lengths and floor areas.
  • Use map and plan measurements to solve problems involving time, materials and cost.

Bushwalkers in Queensland plan with topographic maps at scales such as 1:25 0001 : 25\,000 and 1:50 0001 : 50\,000. Builders, tilers and anyone buying a house work from floor plans, usually at 1:1001 : 100. Both are scale drawings, so you already have the method. What changes is the size of the numbers: on a 1:25 0001 : 25\,000 map, a 4 cm walk is 100 000 cm, which is 1 km.

Interactive

Measure on a map

Drag the pins to measure a distance, and change the scale. How does the real distance change when the scale goes from 1:25 0001 : 25\,000 to 1:50 0001 : 50\,000?

Key idea

Real distances from a map

On a 1:n1 : n map, real distance =n×= n \times map distance, in the same unit. Then convert:

1 km=1000 m=100 000 cm1 \text{ km} = 1000 \text{ m} = 100\,000 \text{ cm}

Handy shortcut: on a 1:25 0001 : 25\,000 map, 1 cm is 250 m, so 4 cm is 1 km. On a 1:50 0001 : 50\,000 map, 2 cm is 1 km.

Two lookouts are 7.3 cm apart on a 1:50 0001 : 50\,000 map. Find the real distance between them in kilometres.

in km

Most maps also have a scale bar: a ruler printed on the map, marked in real distances. A scale bar stays correct even if the map is photocopied larger or smaller, which a ratio scale does not.

A scale bar. The whole bar is 4 cm long on the map.

The scale bar above is 4 cm long and represents 2 km. Write the map's scale in the form 1:n1 : n. What is nn?

Worked example

Planning a bushwalk from a topographic map

  • Complex familiar
  • Technology active

Mei is planning a walk to a waterfall in a national park. On her 1:25 0001 : 25\,000 topographic map, the track has three fairly straight sections measuring 4.2 cm, 6.8 cm and 5.0 cm.

(a) Find the real length of the walk in kilometres.

(b) Mei walks at an average of 3.2 km/h. If she leaves the car park at 7:40 am, when should she reach the waterfall?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Add the map distances.

  2. Multiply by nn, then convert to km (÷100 000\div 100\,000 from cm).

  3. Use time = distance ÷ speed, and convert decimal hours to hours and minutes.

Watch out for

  • Writing 1.25 h as 1 h 25 min. 0.25 h is a quarter of an hour, 15 minutes.

  • Dividing by 1000 instead of 100 000 to convert centimetres to kilometres.

Australian floor plans are usually drawn at 1:1001 : 100, but the numbers written along the walls are real lengths in millimetres. A wall marked 3600 is 3600 mm =3.6= 3.6 m long. On the paper it is drawn 3600÷100=363600 \div 100 = 36 mm long. To find an area, change each length to metres, then multiply.

Floor plan of a small unit. As on real Australian plans, the dimensions are in millimetres.

Use the floor plan. Find the floor area of Bed 1 in square metres.

in m 2

The plan is printed at 1:1001 : 100. How long, in centimetres, is the 4800 mm wall of Bed 1 on the printed plan?

in cm

Worked example

Flooring an L-shaped living room from a plan

  • Complex unfamiliar
  • Technology active

The plan shows the L-shaped living room of a Townsville house at a scale of 1:1001 : 100. The owners want hybrid flooring, sold in boxes that each cover 2.2 m² and cost $142.80. The installer says to allow an extra 10% for cutting and waste.

How many boxes should they buy, and what will the flooring cost?

Living room floor plan, scale 1:1001 : 100. Lengths are measured on the plan.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Convert every plan length to a real length.

  2. Split a composite shape into rectangles and add their areas.

  3. Increase by the waste allowance, divide by the coverage per box and round up.

  4. Multiply the whole number of boxes by the price.

Watch out for

  • Using the full 6.2×4.5=27.96.2 \times 4.5 = 27.9 m² rectangle and forgetting the cut-out corner.

  • Rounding 12.45 boxes down to 12. The floor would be about 1 m² short.

Common mistake

Converting areas the long way round

Change map or plan lengths to real lengths first, then work out the area. If you find the area on the paper first (in cm²), you must multiply by n2n^2, not nn, and convert with 1 m2=10 000 cm21 \text{ m}^2 = 10\,000 \text{ cm}^2. That route is where marks are lost.

Exam tip

In the exam

Show the measurement, the scale calculation and the unit conversion as separate lines. When buying materials, round up to whole boxes, rolls or tiles, and say so. Always finish with a sentence that answers the question asked, such as "She needs 13 boxes, costing $1856.40."

Summary

  • Real distance =n×= n \times map distance, in the same unit; 1 km=100 000 cm1 \text{ km} = 100\,000 \text{ cm}.

  • On 1:25 0001 : 25\,000, 4 cm is 1 km. On 1:50 0001 : 50\,000, 2 cm is 1 km.

  • A scale bar is a ruler of real distances and survives enlarging or reducing the map.

  • Australian floor plans are usually 1:1001 : 100 with dimensions in millimetres: 3600 means 3.6 m.

  • Convert lengths to real units before finding areas, then use the area for costs and materials, rounding up to whole items.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 70% read

Save your progress with a free account