Lesson 9 of 12 · 20 min

The periodic table and its trends

Relate an element's period, group and block to its electron configuration, and explain and analyse trends in atomic and ionic radius, first ionisation energy, electronegativity and valency with data-book values.

What you will be able to do

  • Describe how the periodic table is arranged by atomic number into periods, groups and the s, p, d and f blocks.
  • Find an element's position from its configuration, and its configuration from its position.
  • Explain the trends in atomic radius, first ionisation energy and electronegativity across period 3 and down groups.
  • Analyse data-book values for radii, ionisation energies, electronegativities and valencies to identify trends and exceptions.

Each element has a symbol of one or two letters, the first always a capital: C, Cl, Ca. Most come from the English name, but some come from Latin: Na (natrium, sodium), K (kalium, potassium), Fe (ferrum, iron), Cu (cuprum, copper), Ag (argentum, silver), Pb (plumbum, lead).

Mendeleev ordered the elements by atomic mass in 1869 and left gaps for elements not yet found. In 1913 Henry Moseley showed that the true order is by atomic number: every element has one more proton than the one before it. That ordering, together with electron configurations, explains the table's whole shape.

Key idea

Reading the table from configurations

  • The period (row) is the number of the outermost occupied shell. Sodium, [Ne] 3s1\mathrm{[Ne]\,3s^1}, is in period 3.
  • A group (column) holds elements with the same outer configuration, so similar chemistry. Group 1 all end in s1\mathrm{s^1}; group 17 all end in s2 p5\mathrm{s^2\,p^5}.
  • The block is the subshell the highest-energy electron enters: the s block (groups 1 and 2, plus helium), the p block (groups 13–18), the d block (groups 3–12, the transition metals) and the f block (lanthanoids and actinoids).
  • Groups 1, 2 and 13–18 have 1, 2 and 3–8 valence electrons (helium has 2).
Interactive

The four blocks

Each block is as wide as the number of electrons its subshell holds: s 2, p 6, d 10, f 14. Select an element to see the configuration that puts it there.

Worked example

Position in the periodic table from a configuration

  • Simple familiar
  • Technology free

For each configuration, state the period, group and block of the element, and identify it.

(a) [Ne] 3s2 3p4\mathrm{[Ne]\,3s^2\,3p^4} (b) [Ar] 3d5 4s2\mathrm{[Ar]\,3d^5\,4s^2}

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Period = highest shell number.

  2. Block = subshell filled last.

  3. Group: in the s block, the number of outer electrons; in the p block, 10 + the number of outer-shell electrons; in the d block, the number of 4s + 3d electrons.

Watch out for

  • Calling an element with 6 valence electrons group 6. In the p block it is group 16.

  • Using the number of 3d electrons alone for a transition metal's group.

An element has the configuration [Ar] 3d10 4s2 4p5\mathrm{[Ar]\,3d^{10}\,4s^2\,4p^5}. Where is it in the periodic table?

Choose one answer

Why properties change across a period and down a group. Two things decide how strongly an atom holds its outer electrons:

  • Nuclear charge. Across a period, each element has one more proton, but the new electron goes into the same shell. Inner electrons shield the outer ones about equally, so the outer electrons feel a stronger pull.
  • Number of shells. Down a group, each element has an extra shell. The outer electrons are further from the nucleus and better shielded by more inner electrons, so they feel a weaker pull, even though the nucleus has more protons.
Data-book values across period 3. The data book gives no electronegativity for argon, and its radius for argon is measured between atoms that are not bonded, so it does not continue the trend.
ElementAtomic radius (pm)First ionisation energy (kJ mol−1\mathrm{kJ\,mol^{-1}})ElectronegativityValency
Na1605020.91
Mg1407441.32
Al1245841.63
Si1147931.94
P10910182.23
S10410062.62
Cl10012573.21
Ar1011527—0

Key idea

The trends

PropertyAcross a period (left to right)Down a group
Atomic radiusdecreasesincreases
First ionisation energyincreases (with small dips)decreases
Electronegativityincreasesdecreases

All three follow from the same cause: across a period the outer electrons are held more strongly; down a group they are held less strongly. Fluorine, small and with a high nuclear charge for its size, has the highest electronegativity of all, 4.0.

Interactive

Trends as a heat map

Pick a property and a period or group. Which way does each trend run, and which elements break the pattern?

First ionisation energies from the data book for Z=1Z = 1 to 20. Each period starts low at an alkali metal and climbs to a noble gas, with small dips at groups 13 and 16.

Why the dips at groups 13 and 16?

Group 2 to 13 (Mg 744 → Al 584): aluminium's outer electron is in 3p, which is higher in energy than 3s and partly shielded by the 3s electrons, so less energy is needed to remove it.

Group 15 to 16 (P 1018 → S 1006): phosphorus has three unpaired 3p electrons. Sulfur's fourth 3p electron must pair up in an orbital that already holds one, and the repulsion between the paired electrons makes one of them easier to remove.

Both dips are evidence for subshells and Hund's rule.

Explain why the atomic radius decreases from sodium (160 pm) to chlorine (100 pm) across period 3.

Write it out as you would in an exam. Put maths between dollar signs, like $x^2 + 1$. Worth 1 mark.

0 / 4000

Ionic radius. A main-group cation is smaller than its atom: it has lost its whole outer shell, and the remaining electrons are pulled in by the unchanged nucleus (Na\ce{Na} 160 pm, NaX+\ce{Na+} 102 pm). An anion is larger than its atom: the extra electrons repel each other and the same nuclear charge holds more electrons (Cl\ce{Cl} 100 pm, ClX−\ce{Cl-} 181 pm).

Ions with the same number of electrons (isoelectronic ions) shrink as the nuclear charge rises: NaX+\ce{Na+} 102, MgX2+\ce{Mg^2+} 72 and AlX3+\ce{Al^3+} 53 pm all have 10 electrons.

Worked example

Trends down group 2 from data-book values

  • Complex unfamiliar
  • Technology free

The data book gives these values for group 2.

ElementBeMgCaSrBa
Atomic radius (pm)99140174190206
First ionisation energy (kJ mol−1\mathrm{kJ\,mol^{-1}})906744596556509

(a) Describe the trends and the relationship between the two properties.

(b) Explain the trends.

(c) Radium is below barium. Predict whether its first ionisation energy is above or below 509 kJ mol−1509\ \mathrm{kJ\,mol^{-1}}, and justify the prediction.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Describe each trend with the data, including the size of the changes.

  2. State the relationship between the properties.

  3. Explain using nuclear charge, number of shells and shielding.

  4. Predict by extending the trend, and state the limits of the prediction.

Watch out for

  • Explaining with "more protons, so a stronger pull" down a group. The extra shells and shielding outweigh the extra protons.

  • Describing the trends without linking them.

Which statement about the data-book radii of potassium (200 pm) and the potassium ion KX+\ce{K+} (138 pm) is the best explanation of the difference?

Choose one answer

Exam tip

Explaining a trend

QCAA markers look for the cause, not just the direction. State (1) what happens to the nuclear charge, (2) what happens to the number of shells or shielding, and (3) the effect on the attraction for the outer electrons. Then link it to the property. Quote data-book values when the question gives or asks for data.

Summary

  • Elements are ordered by atomic number. Period = outermost shell; group = outer configuration; block = subshell being filled (s, p, d, f).

  • Across a period: nuclear charge up, same shell, so radius down, first ionisation energy and electronegativity up.

  • Down a group: more shells and shielding, so radius up, first ionisation energy and electronegativity down.

  • Dips in first ionisation energy at groups 13 and 16 come from the 3p subshell and electron pairing.

  • Cations are smaller than their atoms and anions larger; isoelectronic ions shrink as nuclear charge increases.

  • Valency across period 3 runs 1, 2, 3, 4, 3, 2, 1, 0.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 9 of 120% read

Save your progress with a free account