Lesson 3 of 12 · 18 min
Reading mass spectra
Read an element's mass spectrum to find its isotopes and their abundances, calculate its relative atomic mass, and work back from a relative atomic mass to the abundances of two isotopes.
What you will be able to do
- State the three stages of mass spectrometry.
- Identify the isotopes of an element and their abundances from its mass spectrum.
- Calculate from a spectrum given as percentages or as relative peak heights.
- Calculate the percentage abundances of two isotopes from .
How do we know that chlorine is about three-quarters chlorine-35? Nobody counts atoms one at a time. A mass spectrometer sorts a sample's atoms by mass and measures how many of each there are, and its printout, the mass spectrum, is something you will be asked to read and calculate from.
Key idea
What a mass spectrometer does
- Ionisation: atoms of the sample are turned into positive ions, usually by knocking off one electron, so each ion has a charge of 1+.
- Separation: the ions are separated by their mass-to-charge ratio ().
- Detection: a detector counts the ions arriving at each .
You do not need to know how the instrument does each stage, only what it measures.
For an element, each ion has a charge of 1+, so is just the mass of the isotope. A mass spectrum plots relative abundance (or intensity) against :
- each peak is one isotope, so the number of peaks is the number of isotopes;
- a peak's position on the axis gives the isotope's mass;
- a peak's height gives the isotope's relative abundance.
The mass spectrum of magnesium: three isotopes, with magnesium-24 by far the most abundant.
Use the magnesium spectrum above, with isotopic masses 23.99, 24.99 and 25.98. Calculate the relative atomic mass of magnesium to two decimal places.
Pick an element and watch the weighted average build from its peaks. Drag the abundances: how does the relative atomic mass respond?
Relative heights instead of percentages. Some spectra label the tallest peak 100 and the others relative to it. The weighted-average formula still works; you just divide by the sum of the heights instead of by 100.
Worked example
Relative atomic mass of zinc from a mass spectrum
The mass spectrum of a sample of zinc has five peaks. Their relative heights, with the tallest peak set to 100, are shown. Taking each isotope's mass as its mass number, calculate the relative atomic mass of zinc to two decimal places, and suggest why it differs slightly from the data book value of 65.38.
Mass spectrum of zinc. Heights are relative to the tallest peak.
Step 1: Read the isotopes and their heights
Five isotopes: zinc-64 (100), zinc-66 (57.4), zinc-67 (8.4), zinc-68 (38.6) and zinc-70 (1.3).
Step 2: Add the heights
The heights are not percentages, so you divide by their total instead of by 100.
Step 3: Weighted sum
Step 4: Divide
Step 5: Explain the difference
Isotopic masses are not exactly whole numbers (zinc-64 is 63.93, for example), so using mass numbers gives a slightly high value. Reading the peak heights from the spectrum also adds some uncertainty.
Try it yourself first, then check the working one step at a time.
Answer
. It is slightly above 65.38 because mass numbers were used in place of the true isotopic masses, which are a little below the whole numbers.
Method
Read each peak's m/z and height.
Multiply each m/z by its height and add.
Divide by the sum of the heights.
Watch out for
Dividing by 100 when the heights do not add to 100.
Missing a small peak.
Working backwards: abundances from . For an element with two isotopes, let the fraction of the first isotope be . The fraction of the second must be , so
Solve for , then multiply by 100 for a percentage.
Worked example
Percentage abundances of the isotopes of gallium
Gallium has two naturally occurring isotopes: gallium-69 (isotopic mass 68.93) and gallium-71 (isotopic mass 70.92). Use the data book's relative atomic mass of gallium, 69.72, to calculate the percentage abundance of each isotope.
Step 1: Define the unknown
Let be the fraction of gallium-69. Then the fraction of gallium-71 is .
The two fractions must add to 1, so one unknown is enough.
Step 2: Write the weighted average
Step 3: Expand and solve
, so
Step 4: Convert to percentages
Gallium-69: . Gallium-71: .
Step 5: Check
69.72 is closer to 68.93 than to 70.92, so gallium-69 should be the more abundant isotope. It is.
Try it yourself first, then check the working one step at a time.
Answer
Gallium-69 is 60.3 % and gallium-71 is 39.7 % of natural gallium.
Method
Let = fraction of one isotope; the other is .
; solve for .
Convert to percentages and check that the more abundant isotope is the one nearer .
Watch out for
Giving the abundance of the wrong isotope; state clearly which one is.
Rounding the masses before subtracting, which loses most of the precision.
Boron has two isotopes, boron-10 (isotopic mass 10.01) and boron-11 (isotopic mass 11.01). Its relative atomic mass is 10.81. Calculate the percentage abundance of boron-10, to three significant figures.
Common mistake
Which isotope is x?
Define clearly before you solve, and check the answer makes sense: the more abundant isotope is the one whose mass is closer to . Boron's 10.81 is closer to 11, so boron-11 is the major isotope.
Extension: why chlorine gas shows three peaks near 70
A sample of chlorine gas, , also gives molecular ions . Each molecule contains two atoms picked from roughly 3 parts to 1 part :
- at :
- (either way round) at :
- at :
So the peaks are in the ratio 9 : 6 : 1. Turn on molecular in the spectra lab to see them.
Exam tip
In the exam
Show the weighted-average expression with every mass and abundance substituted, then the answer. Give to two decimal places to match the data book, and comment on whether it agrees with the data book value; a small difference usually comes from rounding of the abundances.
Summary
Mass spectrometry ionises the sample, separates the ions by and detects them.
Each peak is an isotope; its position is the isotope's mass and its height its relative abundance.
, whether abundances are percentages or relative heights.
For two isotopes, solve for the fraction .
With two isotopes, the more abundant one is the one whose mass is closer to .
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.