Lesson 1 of 14 · 15 min
The structure of DNA
Describe DNA as an antiparallel double helix of nucleotides held together by complementary base pairs, write a complementary strand, and use the base-pairing rules on composition data.
What you will be able to do
- Name the three parts of a nucleotide and the four bases of DNA, and tell DNA from RNA.
- Describe the double helix: a sugar–phosphate backbone, antiparallel strands and bases joined by hydrogen bonds.
- Apply complementary base pairing (A–T with two hydrogen bonds, G–C with three) to write the other strand.
- Use the base-pairing rules to calculate the percentage of each base in double-stranded DNA.
Mash a strawberry with a little detergent and salt, filter it, and pour ice-cold ethanol down the side of the tube. Within a minute, white threads rise into the ethanol layer. Those threads are DNA from millions of strawberry cells, clumped together where you can see them.
DNA (deoxyribonucleic acid) is the molecule that stores the instructions for building and running a cell. Its job is to hold information and to be copied accurately, and both follow from its structure.
Definition
Nucleotide
A nucleotide is the building block of DNA. It has three parts:
- a phosphate group
- a five-carbon (pentose) sugar, deoxyribose
- a nitrogenous base: adenine (A), thymine (T), guanine (G) or cytosine (C).
A and G are purines, with two rings. C and T are pyrimidines, with one ring.
One nucleotide. The sugar's carbons are numbered 1′ to 5′: the base is on 1′, the phosphate on 5′, and the next nucleotide joins at the 3′ OH.
The backbone. Nucleotides join into a strand by covalent phosphodiester bonds between the phosphate of one nucleotide and the 3′ carbon of the sugar of the next. The strand has a sugar–phosphate backbone with the bases sticking out to one side. One end has a free phosphate on a 5′ carbon (the 5′ end), the other a free 3′ OH (the 3′ end), so a strand has a direction, written 5′→3′.
The double helix. Two strands lie side by side with their bases pointing inwards, joined by hydrogen bonds between pairs of bases, and the pair twists into a right-handed double helix about 2 nm wide. The strands are antiparallel: one runs 5′→3′ and the other 3′→5′.
Key idea
Complementary base pairing
- Adenine pairs with thymine, held by two hydrogen bonds.
- Guanine pairs with cytosine, held by three hydrogen bonds.
Each pair is one purine with one pyrimidine, so every rung of the ladder is the same width. The sequence of one strand fixes the sequence of the other: read across the pairs and swap A↔T, G↔C.
Two antiparallel strands. A–T pairs have two hydrogen bonds (dashes) and G–C pairs three.
Tap a base to change it and watch its partner follow. Untwist the helix to see the ladder, and check the 5′ and 3′ ends: the strands run opposite ways.
One strand of a DNA molecule reads 5′-AGTCCGAT-3′. Write the complementary strand, 5′→3′.
Why this structure suits the job. The information is the order of bases along a strand, and the sugar–phosphate backbone, held by strong covalent bonds, keeps that order intact. The bases pair by hydrogen bonds, which are individually weak, so the strands can be unzipped for copying or reading without breaking the backbone. Because pairing is complementary, each strand is a template for the other: that is how DNA is copied (lesson 3) and read (lesson 4).
Key idea
The base-pairing rules for composition (Chargaff's rules)
In double-stranded DNA every A is paired with a T and every G with a C, so
If a sample is adenine, it is also thymine. That leaves for G and C together, so it is guanine and cytosine.
Worked example
Base composition and hydrogen bonds in a DNA fragment
A double-stranded DNA fragment is 1000 base pairs long, and 21 % of its bases are cytosine.
(a) Calculate the percentage of each of the other three bases. (b) Calculate the number of adenine bases in the fragment. (c) Calculate the number of hydrogen bonds holding the two strands together. (d) A second 1000 bp fragment is 40 % cytosine. Predict which fragment needs the higher temperature to separate its strands, and explain why.
Step 1: Use the base-pairing rules
. Then , so .
Every C is paired with a G and every A with a T, so their percentages are equal in double-stranded DNA.
Step 2: Count the bases
1000 base pairs is bases. Adenine: . (Likewise T 580, G 420, C 420.)
Step 3: Count the base pairs of each type
Each A is in one A–T pair, so there are 580 A–T pairs and G–C pairs.
Step 4: Count the hydrogen bonds
A–T pairs have 2 hydrogen bonds and G–C pairs 3: .
Step 5: Compare the fragments
In the second fragment 40 % of the 2000 bases, 800, are C, so there are 800 G–C pairs and 200 A–T pairs, giving hydrogen bonds. With more G–C pairs it has more hydrogen bonds to break, so it needs a higher temperature to separate.
Strand separation (denaturation) breaks the hydrogen bonds between bases; the backbone stays intact.
Try it yourself first, then check the working one step at a time.
Answer
(a) G 21 %, A 29 %, T 29 %. (b) 580. (c) 2420 hydrogen bonds. (d) The 40 % C fragment, because it has more G–C pairs (three hydrogen bonds each), 2800 hydrogen bonds in all.
Method
%A = %T and %G = %C in double-stranded DNA.
Bases = 2 × base pairs.
Hydrogen bonds = 2 × (A–T pairs) + 3 × (G–C pairs).
Watch out for
Forgetting that 1000 base pairs is 2000 bases.
Giving every base pair the same number of hydrogen bonds: A–T has 2, G–C has 3.
A sample of double-stranded DNA from a bacterium contains thymine. What percentage of its bases are cytosine?
| Feature | DNA | RNA |
|---|---|---|
| Sugar | Deoxyribose | Ribose |
| Bases | A, T, G, C | A, U, G, C (uracil replaces thymine) |
| Strands | Two, as a double helix | Usually one |
| Where (eukaryotes) | Nucleus, mitochondria, chloroplasts | Made in the nucleus; works in the cytoplasm and at ribosomes |
| Job | Stores genetic information long term | Carries and uses it: mRNA, tRNA and rRNA |
Common mistake
Two kinds of bond, two different jobs
The bonds within a strand (phosphodiester bonds in the backbone) are covalent and strong. The bonds between the strands (hydrogen bonds between bases) are weak one at a time. Writing "the two strands are held together by covalent bonds", or "the bases are joined to each other by phosphodiester bonds", loses the mark.
And because a G–C pair has three hydrogen bonds to an A–T pair's two, DNA rich in G and C needs more energy (a higher temperature) to separate its strands.
History
Building the model, 1953
James Watson and Francis Crick published the double-helix model in 1953. It drew on Erwin Chargaff's base-composition data (A = T, G = C) and on X-ray diffraction images of DNA made at King's College London by Rosalind Franklin with her student Raymond Gosling, and by Maurice Wilkins. Franklin's "Photo 51" showed the helix and its dimensions. Watson, Crick and Wilkins shared the 1962 Nobel Prize in Physiology or Medicine; Franklin had died in 1958, and the prize is not awarded after death.
Note
Practical — extracting DNA from strawberries, kiwifruit or wheat germ
Each step has a reason you should be able to explain:
- Mash the fruit to break cell walls and separate the cells.
- Add detergent, which dissolves the phospholipid membranes of the cell and nucleus, releasing the DNA.
- Add salt (sodium chloride). Its positive ions neutralise the negative phosphate groups of the backbone, so DNA molecules stop repelling each other and can clump together.
- Optionally add a protease (meat tenderiser or fresh pineapple juice) to digest the histones and other proteins.
- Filter, then layer ice-cold ethanol on top. DNA is insoluble in ethanol, so it precipitates as white threads at the boundary. Cold slows enzymes that would break DNA down and makes it precipitate faster.
Strawberries (eight copies of each chromosome) and kiwifruit and wheat (six) are polyploid, so their cells hold a lot of DNA, which is why they give such good yields. The threads are millions of tangled DNA molecules; a single molecule is far too thin to see.
In a DNA extraction, what is the purpose of adding salt to the mashed fruit and detergent?
Worked example
Investigating salt and DNA yield from strawberries
A student investigated how the concentration of salt in the extraction buffer affects the mass of DNA precipitated from strawberries. For each trial, 20 g of strawberry was mashed with 10 mL of buffer (detergent plus salt), filtered, and the DNA precipitated with ice-cold ethanol and weighed wet.
| Salt (g per 100 mL) | Trial 1 (g) | Trial 2 (g) | Trial 3 (g) |
|---|---|---|---|
| 0 | 0.08 | 0.10 | 0.09 |
| 0.5 | 0.21 | 0.19 | 0.23 |
| 1.0 | 0.32 | 0.35 | 0.33 |
| 1.5 | 0.36 | 0.20 | 0.37 |
| 2.0 | 0.35 | 0.37 | 0.36 |
(a) Identify the anomalous result and calculate the mean for each concentration. (b) Describe the trend and explain it in terms of the structure of DNA. (c) Evaluate the validity of using wet mass as the measure of DNA, and suggest two improvements.
Step 1: Spot the anomaly
At 1.5 g per 100 mL, trial 2 (0.20 g) is far below the other two (0.36, 0.37) and below the result at 1.0 g. Exclude it.
Step 2: Means
0 g: g. 0.5 g: g. 1.0 g: g. 1.5 g (without the anomaly): g. 2.0 g: g.
Step 3: Trend
The mass of DNA rises steeply from 0 to 1.0 g per 100 mL (0.09 to 0.33 g), a little more to 1.5 g per 100 mL, then levels off at about 0.36–0.37 g.
Step 4: Explanation
DNA's phosphate groups are negatively charged, so DNA molecules repel each other. Sodium ions neutralise the charges, letting the molecules aggregate and precipitate. Once there are enough ions to neutralise the available DNA, adding more salt does not increase the yield; the limit is then the amount of DNA in 20 g of fruit.
Link the data to a specific property of the molecule: the charge on the sugar–phosphate backbone.
Step 5: Evaluate the measure
Wet mass is not a valid measure of DNA alone: the precipitate holds water and ethanol, and other molecules (pectin, proteins, RNA) can precipitate with it, and the amount of liquid held may vary between trials. Improvements: dry the precipitate to constant mass, or dissolve it and measure DNA by its absorbance at 260 nm; also control strawberry ripeness and variety, and do more trials at concentrations around 1.0–2.0 g per 100 mL to locate the plateau.
Try it yourself first, then check the working one step at a time.
Answer
(a) Anomaly: 0.20 g at 1.5 g per 100 mL. Means: 0.09, 0.21, 0.33, 0.37 (excluding the anomaly), 0.36 g. (b) Yield rises with salt up to about 1.5 g per 100 mL, then plateaus: salt ions neutralise the negative phosphate groups so DNA aggregates, until all the DNA available is precipitated. (c) Wet mass includes water, ethanol and other precipitated molecules, so it overestimates DNA and varies; dry the precipitate or measure absorbance at 260 nm, and control fruit ripeness and do more trials near the plateau.
Method
Identify anomalies before averaging, and say why you excluded them.
Describe the trend with numbers, then explain it with a property of DNA.
Validity: does the measurement really measure the variable? Suggest specific improvements.
Watch out for
Including the anomaly in the mean (0.31 g), which hides the plateau.
Explaining salt's role as "breaking down the membranes" (that is the detergent).
Summary
A nucleotide is a phosphate, deoxyribose and one of four bases: A and G (purines), C and T (pyrimidines).
Phosphodiester bonds join nucleotides into a strand with a sugar–phosphate backbone and a 5′ and a 3′ end.
Two antiparallel strands form a double helix, joined by hydrogen bonds between complementary bases.
A pairs with T (two hydrogen bonds); G pairs with C (three). RNA uses U in place of T.
In double-stranded DNA, %A = %T and %G = %C.
The base sequence stores information; complementary pairing lets each strand serve as a template.
To extract DNA: detergent opens membranes, salt neutralises DNA's charge, cold ethanol precipitates it.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.