Lesson 6 of 8 · 15 min

Undoing a transformation

Use the inverse matrix to undo a linear transformation, find the original point from its image, describe the inverses of dilations, rotations and reflections, and undo a composition in reverse order.

What you will be able to do

  • Explain why the inverse transformation of T\bm{T} has matrix T−1\bm{T}^{-1}.
  • Find the object X\bm{X} from its image using X=T−1X′\bm{X} = \bm{T}^{-1}\bm{X}'.
  • Write and describe the inverses of dilations, rotations and reflections.
  • Undo a composition using (BA)−1=A−1B−1(\bm{BA})^{-1} = \bm{A}^{-1}\bm{B}^{-1}, and explain why a singular matrix has no inverse transformation.

A drone's camera image is rotated and stretched before it reaches your screen. To recover what the camera actually saw, you need to run the transformation backwards.

If T\bm{T} sends X\bm{X} to X′=TX\bm{X}' = \bm{TX}, pre-multiply both sides by T−1\bm{T}^{-1}:

T−1X′=T−1TX=IX=X\bm{T}^{-1}\bm{X}' = \bm{T}^{-1}\bm{T}\bm{X} = \bm{I}\bm{X} = \bm{X}

So T−1\bm{T}^{-1} sends every image back to its object. It is the matrix of the inverse transformation.

Key idea

Inverse transformation

If det⁡(T)≠0\det(\bm{T}) \neq 0, the inverse of the transformation with matrix T\bm{T} has matrix T−1\bm{T}^{-1}, and

X=T−1X′\bm{X} = \bm{T}^{-1}\bm{X}'

Doing T\bm{T} and then T−1\bm{T}^{-1} (or the other way round) leaves every point where it started: T−1T=I=TT−1\bm{T}^{-1}\bm{T} = \bm{I} = \bm{T}\bm{T}^{-1}.

Worked example

Find the point that was transformed

  • Simple familiar
  • Technology free

The transformation with matrix T=[3121]\bm{T} = \begin{bmatrix} 3 & 1 \\ 2 & 1 \end{bmatrix} maps the point PP to P′(5,4)P'(5, 4). Find PP.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Check det⁡(T)≠0\det(\bm{T}) \neq 0.

  2. Find T−1\bm{T}^{-1} and calculate T−1X′\bm{T}^{-1}\bm{X}'.

  3. Check by transforming your answer.

Watch out for

  • Multiplying the image by T\bm{T} instead of T−1\bm{T}^{-1}.

  • Post-multiplying: X′T−1\bm{X}'\bm{T}^{-1} is not even defined for a column.

The transformation with matrix [2113]\begin{bmatrix} 2 & 1 \\ 1 & 3 \end{bmatrix} maps the point PP to P′(4,7)P'(4, 7). Find PP.

For the standard transformations you can write the inverse without any arithmetic, by thinking about what undoes the move.

Inverses of the basic linear transformations.
TransformationMatrixInverse transformationInverse matrix
Dilation, factors aa and bb[a00b]\begin{bmatrix} a & 0 \\ 0 & b \end{bmatrix}Dilation, factors 1a\frac{1}{a} and 1b\frac{1}{b}[1a001b]\begin{bmatrix} \frac{1}{a} & 0 \\ 0 & \frac{1}{b} \end{bmatrix}
Rotation of θ\theta anticlockwiseRθ\bm{R}_\thetaRotation of θ\theta clockwiseR−θ\bm{R}_{-\theta}
Reflection in a lineSθ\bm{S}_\thetaThe same reflectionSθ\bm{S}_\theta

Write the matrix of the inverse of the rotation of 90°90° anticlockwise about the origin.

To undo a sequence of moves you undo them in reverse order, like taking off your shoes before your socks. If A\bm{A} is followed by B\bm{B}, the combined matrix is BA\bm{BA}, and its inverse undoes B\bm{B} first:

(BA)−1=A−1B−1(\bm{BA})^{-1} = \bm{A}^{-1}\bm{B}^{-1}

Check: (A−1B−1)(BA)=A−1(B−1B)A=A−1A=I(\bm{A}^{-1}\bm{B}^{-1})(\bm{BA}) = \bm{A}^{-1}(\bm{B}^{-1}\bm{B})\bm{A} = \bm{A}^{-1}\bm{A} = \bm{I}.

Worked example

Undo a rotation followed by a dilation

  • Complex familiar
  • Technology free

A transformation MM is a rotation of 90°90° anticlockwise about the origin followed by a dilation of factor 2 parallel to the xx-axis.

(a) Find the matrix of MM.

(b) Find the matrix of the inverse transformation and describe it in words.

(c) The image of a point QQ under MM is Q′(−4,3)Q'(-4, 3). Find QQ.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Compose in the right order to get the single matrix.

  2. Invert by undoing the steps in reverse order, or with the 2×22 \times 2 formula.

  3. Apply M−1\bm{M}^{-1} to the image to recover the object.

Watch out for

  • Describing the inverse as "rotate 90°90° clockwise, then dilate by 12\frac{1}{2}", in the wrong order.

Interactive

A transformation with no way back

This matrix has determinant 2×2−4×1=02 \times 2 - 4 \times 1 = 0. Watch the unit square collapse onto the line y=x2y = \frac{x}{2}. Both (2,0)(2, 0) and (0,1)(0, 1) land on (4,2)(4, 2), so nothing can send (4,2)(4, 2) back to a single point.

Note

Singular matrices squash the plane

When det⁡(T)=0\det(\bm{T}) = 0, T\bm{T} flattens the whole plane onto a line through the origin (or onto OO itself). Many different points share each image, so there is no inverse transformation, matching the fact that T−1\bm{T}^{-1} does not exist.

Which of these transformations has no inverse transformation?

Choose one answer

Common mistake

Undoing in the same order

(BA)−1(\bm{BA})^{-1} is A−1B−1\bm{A}^{-1}\bm{B}^{-1}, not B−1A−1\bm{B}^{-1}\bm{A}^{-1}. The last transformation done is the first one undone. If in doubt, find BA\bm{BA} first and invert it with the 2×22 \times 2 formula.

Summary

  • The inverse transformation of T\bm{T} has matrix T−1\bm{T}^{-1}, and the object is X=T−1X′\bm{X} = \bm{T}^{-1}\bm{X}'.

  • Dilations invert to the reciprocal factors, rotations to the same angle the other way, and every reflection is its own inverse.

  • To undo "A\bm{A} then B\bm{B}", undo B\bm{B} then A\bm{A}: (BA)−1=A−1B−1(\bm{BA})^{-1} = \bm{A}^{-1}\bm{B}^{-1}.

  • A singular matrix (det⁡=0\det = 0) squashes the plane onto a line, so it has no inverse transformation.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 80% read

Save your progress with a free account