Specialist Mathematics · Unit 2 · Topic 5

Matrices and transformations

Represent translations as column vectors and dilations, rotations and reflections as 2 × 2 matrices, transform points and polygons, combine and undo transformations with matrix products and inverses, and read area changes from the determinant.

  • 8 lessons
  • 2 h 2 min of lessons
  • 13 worked examples
  • 10 hours in the syllabus
0 of 8

Start here

Translations as column vectors

Lesson 1 of 8 · 11 min

Start the topic

Lessons

8
  1. Translations as column vectors (up next)

    Slide points and shapes by a column vector, find the vector that maps a point to its image, and combine and undo translations.

  2. Matrices that move the plane

    Use a 2 × 2 matrix to transform points, build the matrix of a linear transformation from the images of (1,0)(1, 0) and (0,1)(0, 1), and write the matrix of any dilation.

  3. Rotation and reflection matrices

    Derive and use the exact matrices for rotations about the origin and reflections in lines y=xtan⁡(θ)y = x\tan(\theta), and recognise and describe a rotation or reflection from its matrix.

  4. Transforming polygons

    Transform every vertex of a polygon in one matrix product, combine a linear transformation with a translation, and find an unknown matrix from points and their images.

  5. One transformation after another

    Find the single matrix for a sequence of transformations as a product in the right order, see why the order changes the result, and combine rotations by adding angles.

  6. Undoing a transformation

    Use the inverse matrix to undo a linear transformation, find the original point from its image, describe the inverses of dilations, rotations and reflections, and undo a composition in reverse order.

  7. The determinant and area

    Use |det(T)| as the factor by which a linear transformation multiplies every area, read orientation from the sign of the determinant, and find unknown entries from a required area.

  8. Proving geometric results with matrices

    Multiply general rotation and reflection matrices and simplify with trigonometric identities to prove that two reflections make a rotation, and that a rotation combined with a reflection is a reflection.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Every time a phone rotates a photo, a game spins a sprite or a design app flips a logo, a computer multiplies coordinates by a matrix. In Unit 1 you learnt to multiply, invert and find determinants of 2×22 \times 2 matrices. Now you find out what those operations mean: a 2×22 \times 2 matrix is a machine that moves every point of the plane at once.

You start with translations, which slide a shape along a column vector. Then you meet the linear transformations — dilations, rotations about the origin and reflections in lines through the origin — and the matrix for each. Doing one transformation after another turns out to be matrix multiplication (so the order matters), undoing a transformation is the inverse matrix, and the determinant tells you how areas change. Finally you use matrix products to prove geometric facts, such as why two reflections always make a rotation.

Before you start

Builds on Matrices and Trigonometry and functions.

  • Multiplying, inverting and finding the determinant of 2×22 \times 2 matrices (Unit 1 Matrices).
  • Exact values of sine and cosine for multiples of 30° and 45°, in degrees and radians.
  • The angle sum and difference identities, such as cos⁡(A−B)=cos⁡(A)cos⁡(B)+sin⁡(A)sin⁡(B)\cos(A - B) = \cos(A)\cos(B) + \sin(A)\sin(B) (Unit 2 Trigonometry and functions).
  • Column vectors and vector addition (Unit 1 Vectors in the plane).

What QCAA says you need to know7 dot points

Transformations in the plane

10 hours
  • Understand translations and their representation as column vectors.LessonsTranslations as column vectorsTransforming polygons
  • Use basic linear transformations: dilations of the form (x,y)→(ax,by)(x, y) \to (ax, by), rotations about the origin and reflection in a line that passes through the origin, and the representations of these transformations by 2×22 \times 2 matrices: dilation of factor aa parallel to the xx-axis and factor bb parallel to the yy-axis: [a00b]\begin{bmatrix} a & 0 \\ 0 & b \end{bmatrix}; rotation of angle θ\theta anticlockwise about the origin: [cos⁡(θ)−sin⁡(θ)sin⁡(θ)cos⁡(θ)]\begin{bmatrix} \cos(\theta) & -\sin(\theta) \\ \sin(\theta) & \cos(\theta) \end{bmatrix}; reflection in the line y=xtan⁡(θ)y = x\tan(\theta): [cos⁡(2θ)sin⁡(2θ)sin⁡(2θ)−cos⁡(2θ)]\begin{bmatrix} \cos(2\theta) & \sin(2\theta) \\ \sin(2\theta) & -\cos(2\theta) \end{bmatrix}LessonsMatrices that move the planeRotation and reflection matrices
  • Apply these transformations to points in the plane and polygons.LessonsMatrices that move the planeTransforming polygons
  • Understand and use composition of linear transformations and the corresponding matrix products.LessonsOne transformation after anotherProving geometric results with matrices
  • Understand and use inverses of linear transformations and the relationship with the matrix inverse.LessonUndoing a transformation
  • Understand and use the relationship between the determinant and the effect of a linear transformation on area.LessonThe determinant and area
  • Determine geometric results by matrix multiplications, e.g. showing that the combined effect of two reflections in lines through the origin is a rotation.LessonProving geometric results with matrices

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Translations as column vectors

    Translate points and shapes by a column vector, find the vector that maps a point to its image, and combine and undo translations.

    Practise
  • Finding a transformation's matrix

    Build the matrix of a linear transformation from the images of (1, 0) and (0, 1), from a rule such as (x, y) → (ax, by), or from a point and its image.

    Practise
  • Rotation and reflection matrices

    Write exact matrices for rotations about the origin and reflections in lines y = x tan(θ), including finding θ from the line.

    Practise
  • Describing a transformation

    Recognise a dilation, rotation or reflection from its matrix and describe it fully in words.

    Practise
  • Images of points and polygons

    Multiply a matrix by a point or a matrix of vertices to find the image of a point or polygon.

    Practise
  • Combining transformations

    Write the matrix of one transformation followed by another as a product in the right order.

    Practise
  • Inverse transformations

    Undo a transformation with the inverse matrix, find a point from its image, and describe the inverse in words.

    Practise
  • Determinants and area

    Use |det(T)| as the area scale factor, interpret a negative or zero determinant, and find unknowns from an area.

    Practise
  • Geometric results with matrices

    Prove results such as "two reflections make a rotation" by multiplying general matrices and using trigonometric identities.

    Practise

Worked examples13

All 13

Common mistakes

Multiplying in the wrong order

The matrix of "A\bm{A} followed by B\bm{B}" is BA\bm{BA}, not AB\bm{AB}. The first transformation goes on the right, next to the point it acts on: B(AX)\bm{B}(\bm{A}\bm{X}).

Forgetting the 2θ2\theta in a reflection

For the line y=xtan⁡(θ)y = x\tan(\theta) the matrix uses cos⁡(2θ)\cos(2\theta) and sin⁡(2θ)\sin(2\theta). For y=xy = x, θ=45°\theta = 45°, so 2θ=90°2\theta = 90° and the matrix is [0110]\begin{bmatrix} 0 & 1 \\ 1 & 0 \end{bmatrix}.

Using the gradient as the angle

The line y=3xy = \sqrt{3}x has gradient tan⁡(θ)=3\tan(\theta) = \sqrt{3}, so θ=60°\theta = 60°. The gradient itself is not the angle.

Mixing up clockwise and anticlockwise

The rotation matrix uses an anticlockwise angle. A rotation of 90°90° clockwise is θ=−90°\theta = -90°: [01−10]\begin{bmatrix} 0 & 1 \\ -1 & 0 \end{bmatrix}.

Writing a point as a row

Points are column vectors: T[xy]\bm{T}\begin{bmatrix} x \\ y \end{bmatrix}. The product [xy]T\begin{bmatrix} x & y \end{bmatrix}\bm{T} gives a different answer.

Getting the inverse of a product backwards

To undo "A\bm{A} then B\bm{B}", undo B\bm{B} first: (BA)−1=A−1B−1(\bm{BA})^{-1} = \bm{A}^{-1}\bm{B}^{-1}. Think of taking off your shoes before your socks.

A negative area

The area scale factor is ∣det⁡(T)∣|\det(\bm{T})|. A determinant of −6-6 multiplies areas by 66 and flips the shape; an area is never negative.

Treating a translation as a matrix

A translation moves the origin, so no 2×22 \times 2 matrix can do it. Add the column vector instead: X′=X+v\bm{X}' = \bm{X} + \bm{v}.

Exam tips

  1. The formula book gives the dilation, rotation and reflection matrices. Use the exact form, and write the angle you substituted: "rotation with θ=π3\theta = \frac{\pi}{3}".

  2. When asked to "describe" a transformation, give every detail: the type, the centre or mirror line, and the angle with its direction, or the factors and the axes they are parallel to.

  3. For a composition, write the words first ("reflect, then rotate"), then the product with the first matrix on the right. Markers look for the order.

  4. In Paper 1, keep entries exact: 32\frac{\sqrt{3}}{2}, not 0.8660.866. In Paper 2 a calculator multiplies matrices quickly, but still show the matrices you entered.

  5. Check an image point by sketching: a rotation keeps the distance from OO, a reflection puts the image the same distance on the other side of the line.

  6. To find an unknown matrix from points and images, set up TP=P′\bm{T}\bm{P} = \bm{P}' with the points as columns, then post-multiply by P−1\bm{P}^{-1}.

  7. For area questions, state the determinant, then multiply the object's area by its absolute value. Say whether the image is reflected if the determinant is negative.

  8. "Show that" questions need the full product written out and every identity named, such as the angle difference identity.

Where this shows up

  • Computer graphics: every rotation, flip and resize in a game engine or photo editor multiplies coordinates by a matrix. Graphics cards do billions of these products a second.

  • Animation and robotics: a robot arm's joints each rotate, and the position of its hand is the product of their rotation matrices.

  • Crystallography and chemistry: the symmetries of a crystal or a molecule are rotations and reflections, and their matrices classify them.

  • Kaleidoscopes and tiling patterns: two mirrors at an angle produce a rotation, which is why the pattern repeats around the centre.

  • Maps and surveying: changing between coordinate grids rotates and rescales the plane.

Save your progress with a free account