Lesson 5 of 7 · 20 min

Rays, sectors and combined regions

Sketch rays Arg⁡(z−z0)=θ\operatorname{Arg}(z - z_0) = \theta and sectors such as π4≤Arg⁡(z)≤3π4\frac{\pi}{4} \le \operatorname{Arg}(z) \le \frac{3\pi}{4}, combine several conditions into one region, and use Cartesian algebra on loci such as ∣z−1∣=2∣z−i∣|z - 1| = 2|z - i|.

What you will be able to do

  • Sketch Arg⁡(z−z0)=θ\operatorname{Arg}(z - z_0) = \theta as a ray from z0z_0 that does not include z0z_0.
  • Sketch sectors such as π4≤Arg⁡(z)≤3π4\frac{\pi}{4} \le \operatorname{Arg}(z) \le \frac{3\pi}{4}.
  • Sketch the region where several conditions hold at once, and find its area or key points.
  • Use z=x+yiz = x + yi to identify loci such as ∣z−1∣=2∣z−i∣|z - 1| = 2|z - i|.

The modulus measures how far; the argument measures which way. So a condition on the argument picks out the points in one direction. Arg⁡(z)=π4\operatorname{Arg}(z) = \frac{\pi}{4} is every point whose direction from OO is π4\frac{\pi}{4}: the points 1+i1 + i, 2+2i2 + 2i, 0.1+0.1i0.1 + 0.1i and so on, a half-line leaving the origin. The origin itself is not on it, because Arg⁡(0)\operatorname{Arg}(0) is undefined.

Key idea

Rays

Arg⁡(z−z0)=θ\operatorname{Arg}(z - z_0) = \theta is the ray (half-line) that starts at z0z_0 and leaves it at angle θ\theta to the positive real direction. The starting point z0z_0 is not included, so mark it with an open circle.

The reason: z−z0z - z_0 is the vector from z0z_0 to zz, so the condition says "the direction from z0z_0 to zz is θ\theta".

Interactive

A ray from a point

This is Arg⁡(z−1+i)=3π4\operatorname{Arg}(z - 1 + i) = \frac{3\pi}{4}, the ray from 1−i1 - i at angle 3π4\frac{3\pi}{4}. Drag zz onto and off the ray. What happens at z=1−iz = 1 - i?

Which point lies on the ray Arg⁡(z−2)=π2\operatorname{Arg}(z - 2) = \frac{\pi}{2}?

Choose one answer

Sectors. An inequality between two arguments gives the region between two rays. The syllabus example π4≤Arg⁡(z)≤3π4\frac{\pi}{4} \le \operatorname{Arg}(z) \le \frac{3\pi}{4} is the wedge between the ray at π4\frac{\pi}{4} and the ray at 3π4\frac{3\pi}{4}, with both rays included (solid) and the origin excluded.

π4≤Arg⁡(z)≤3π4\frac{\pi}{4} \le \operatorname{Arg}(z) \le \frac{3\pi}{4}: everything between the two rays, which are included. The origin is not.

Note

Sectors around the negative real axis

Because Arg⁡\operatorname{Arg} jumps from π\pi to just above −π-\pi on the negative real axis, a wedge around that axis needs two inequalities: 3π4≤Arg⁡(z)≤π\frac{3\pi}{4} \le \operatorname{Arg}(z) \le \pi or −π<Arg⁡(z)≤−3π4-\pi < \operatorname{Arg}(z) \le -\frac{3\pi}{4}. You can write it in one line as ∣Arg⁡(z)∣≥3π4|\operatorname{Arg}(z)| \ge \frac{3\pi}{4}.

Combined regions. When a set is defined by several conditions joined by "and", the region is where all of them hold: sketch each one lightly, then shade only the overlap. Mark which parts of the boundary are included.

Worked example

Sketch ∣z∣≤3|z| \le 3 and π4≤Arg⁡(z)≤3π4\frac{\pi}{4} \le \operatorname{Arg}(z) \le \frac{3\pi}{4}, and find its area

  • Complex familiar
  • Technology free

Sketch the region R={z:∣z∣≤3}∩{z:π4≤Arg⁡(z)≤3π4}R = \{z : |z| \le 3\} \cap \left\{z : \dfrac{\pi}{4} \le \operatorname{Arg}(z) \le \dfrac{3\pi}{4}\right\} and find its exact area.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Sketch each condition on its own.

  2. Shade only where all conditions hold.

  3. Mark included boundaries solid and excluded points open.

  4. Use the sector area formula 12r2θ\frac{1}{2}r^2\theta.

Watch out for

  • Using the angle 3π4\frac{3\pi}{4} instead of the angle between the rays, π2\frac{\pi}{2}.

  • Shading the whole disc or the whole sector rather than their overlap.

Find the exact area of the region {z:∣z∣≤4}∩{z:0≤Arg⁡(z)≤π3}\{z : |z| \le 4\} \cap \left\{z : 0 \le \operatorname{Arg}(z) \le \frac{\pi}{3}\right\}.

Reads asYour answer shows here as maths.

Common mistake

Arg(z − z₀) is not Arg(z) − Arg(z₀)

Arg⁡(z−2i)=π4\operatorname{Arg}(z - 2i) = \frac{\pi}{4} is the ray from 2i2i. It is not the same as Arg⁡(z)−Arg⁡(2i)=π4\operatorname{Arg}(z) - \operatorname{Arg}(2i) = \frac{\pi}{4}, which would be the ray from the origin at 3π4\frac{3\pi}{4}. Subtracting complex numbers is not subtracting their arguments.

When the shape is not obvious. Some loci don't announce themselves. The syllabus example ∣z−1∣=2∣z−i∣|z - 1| = 2|z - i| says "zz is twice as far from 11 as from ii". It is not a perpendicular bisector, because the distances are not equal. The reliable method is the same as before: let z=x+yiz = x + yi, square, and simplify. The result turns out to be a circle.

Worked example

Identify the locus ∣z−1∣=2∣z−i∣|z - 1| = 2|z - i|

  • Complex familiar
  • Technology free

Show that the locus ∣z−1∣=2∣z−i∣|z - 1| = 2|z - i| is a circle, and find its centre and radius.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Let z=x+yiz = x + yi and write each modulus squared as (real part)2^2 + (imaginary part)2^2.

  2. Square any constant factor outside a modulus.

  3. Collect terms; if x2x^2 and y2y^2 have equal coefficients, divide by it.

  4. Complete the square in xx and yy.

Watch out for

  • Forgetting to square the 2, which gives (x−1)2+y2=2(…)(x - 1)^2 + y^2 = 2(\ldots).

  • Treating it as a perpendicular bisector. That needs equal distances, with a ratio of 1.

The locus ∣z∣=2∣z−3∣|z| = 2|z - 3| is a circle with centre x0+y0ix_0 + y_0 i and radius rr. Find x0x_0, y0y_0 and rr.

Exam tip

Describe and sketch

For "identify and sketch", give both: a sentence ("the ray from 1−i1 - i at angle 3π4\frac{3\pi}{4}, not including 1−i1 - i") and a labelled sketch. For a combined region, show each boundary, shade only where every condition holds, and use open circles for excluded points such as the start of a ray.

Summary

  • Arg⁡(z−z0)=θ\operatorname{Arg}(z - z_0) = \theta is a ray from z0z_0 at angle θ\theta. The point z0z_0 is excluded.

  • α≤Arg⁡(z)≤β\alpha \le \operatorname{Arg}(z) \le \beta is a sector between two rays from OO, without the origin.

  • For "and", shade only where every condition holds. Solid boundaries for ≤\le, dashed for <<.

  • A sector of radius rr and angle θ\theta has area 12r2θ\frac{1}{2}r^2\theta.

  • For any unfamiliar locus, let z=x+yiz = x + yi, square the moduli and simplify. For distinct fixed points aa, bb and k>0k > 0, ∣z−a∣=k∣z−b∣|z - a| = k|z - b| with k≠1k \ne 1 is a circle.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 70% read

Save your progress with a free account