Lesson 2 of 7 · 18 min

Polar form and polar coordinates

Write a complex number as rcis⁡(θ)r\cis(\theta), convert between Cartesian and polar form exactly and with technology, and plot numbers in polar form as polar coordinates.

What you will be able to do

  • Explain why z=r(cos⁡(θ)+isin⁡(θ))=rcis⁡(θ)z = r(\cos(\theta) + i\sin(\theta)) = r\cis(\theta), where r=∣z∣r = |z| and θ\theta is an argument.
  • Convert a+bia + bi to rcis⁡(θ)r\cis(\theta) with the principal argument, exactly or with technology.
  • Convert rcis⁡(θ)r\cis(\theta) to a+bia + bi using exact values.
  • Plot complex numbers in polar form as polar coordinates (r,θ)(r, \theta).

The modulus and argument describe a point completely: how far, and which way. So you should be able to rebuild z=a+biz = a + bi from them. Drop a perpendicular from zz to the real axis. In the right-angled triangle with hypotenuse r=∣z∣r = |z| and angle θ\theta at OO,

a=rcos⁡(θ),b=rsin⁡(θ).a = r\cos(\theta), \qquad b = r\sin(\theta).

These are the same rules you used for the unit circle, scaled by rr. They hold in every quadrant because cos⁡\cos and sin⁡\sin carry the signs for you.

Polar form
z=a+bi=rcos⁡(θ)+i rsin⁡(θ)=r(cos⁡(θ)+isin⁡(θ))=rcis⁡(θ)z = a + bi = r\cos(\theta) + i\,r\sin(\theta) = r\left(\cos(\theta) + i\sin(\theta)\right) = r\cis(\theta)

Definition

Polar form

A non-zero complex number written as

z=rcis⁡(θ),where cis⁡(θ)=cos⁡(θ)+isin⁡(θ),z = r\cis(\theta), \quad \text{where } \cis(\theta) = \cos(\theta) + i\sin(\theta),

is in polar form. Here r=∣z∣>0r = |z| > 0 and θ\theta is an argument of zz. Unless a question says otherwise, use the principal argument, −π<θ≤π-\pi < \theta \le \pi.

"cis" is short for "cos plus i sin". cis⁡(θ)\cis(\theta) is the point on the unit circle at angle θ\theta, and rcis⁡(θ)r\cis(\theta) is that point pushed out to distance rr.

Interactive

Cartesian and polar side by side

Drag zz and compare its two descriptions. Try to place zz at 2cis⁡(2π3)2\cis\left(\frac{2\pi}{3}\right) and read off its Cartesian form.

Cartesian to polar

  1. Sketch the point

    Mark a+bia + bi on an Argand diagram and note its quadrant.

  2. Find r=a2+b2r = \sqrt{a^2 + b^2}

    Simplify any surd.

  3. Find θ=Arg⁡(z)\theta = \operatorname{Arg}(z)

    Use the related angle tan⁡−1∣ba∣\tan^{-1}\left|\frac{b}{a}\right| and the quadrant, as in the last lesson.

  4. Write z=rcis⁡(θ)z = r\cis(\theta)

    Check: rcos⁡(θ)r\cos(\theta) and rsin⁡(θ)r\sin(\theta) should give back aa and bb.

Worked example

Write −4+4i-4 + 4i in polar form

  • Simple familiar
  • Technology free

Express z=−4+4iz = -4 + 4i in polar form rcis⁡(θ)r\cis(\theta), where −π<θ≤π-\pi < \theta \le \pi.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Sketch and note the quadrant.

  2. r=a2+b2r = \sqrt{a^2 + b^2}, simplified.

  3. θ=Arg⁡(z)\theta = \operatorname{Arg}(z) from the related angle and the quadrant.

  4. Check by converting back.

Watch out for

  • Writing θ=−π4\theta = -\frac{\pi}{4} from tan⁡−1(−1)\tan^{-1}(-1). That is the direction of 4−4i4 - 4i.

  • Leaving r=32r = \sqrt{32}. Simplify surds in the modulus.

Write z=−5iz = -5i in polar form rcis⁡(θ)r\cis(\theta) with −π<θ≤π-\pi < \theta \le \pi. Give rr and θ\theta.

Polar to Cartesian is just evaluation: a=rcos⁡(θ)a = r\cos(\theta) and b=rsin⁡(θ)b = r\sin(\theta). With an exact-value angle you get an exact answer.

Worked example

Write 6cis⁡(−5π6)6\cis\left(-\frac{5\pi}{6}\right) in Cartesian form

  • Simple familiar
  • Technology free

Express z=6cis⁡(−5π6)z = 6\cis\left(-\dfrac{5\pi}{6}\right) in the form a+bia + bi.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Write z=rcos⁡(θ)+rsin⁡(θ) iz = r\cos(\theta) + r\sin(\theta)\,i.

  2. Find exact values, using the quadrant for the signs.

  3. Multiply out and simplify.

Watch out for

  • Swapping sine and cosine: the real part is rcos⁡(θ)r\cos(\theta).

  • Losing the signs: −5π6-\frac{5\pi}{6} is below the real axis and to the left, so both parts are negative.

Write 4cis⁡(2π3)4\cis\left(\frac{2\pi}{3}\right) in the form a+bia + bi.

Reads asYour answer shows here as maths.

Common mistake

The modulus must be positive

−2cis⁡(π3)-2\cis\left(\frac{\pi}{3}\right) looks like polar form but is not, because rr must be positive. A minus sign is a half-turn, so move it into the argument:

−2cis⁡(π3)=2cis⁡(π3−π)=2cis⁡(−2π3).-2\cis\left(\frac{\pi}{3}\right) = 2\cis\left(\frac{\pi}{3} - \pi\right) = 2\cis\left(-\frac{2\pi}{3}\right).

In the same way, rcis⁡(θ)‾=rcis⁡(−θ)\overline{r\cis(\theta)} = r\cis(-\theta): the conjugate is a reflection in the real axis, so the angle changes sign.

Technology for other angles. Most complex numbers do not have an exact-value argument. Then you find the angle with a calculator and round it. Keep rr exact if it is a surd, and say how you rounded the angle.

Worked example

Write −5−12i-5 - 12i in polar form with technology

  • Simple familiar
  • Technology active

Express z=−5−12iz = -5 - 12i in polar form, giving the argument in radians correct to three decimal places.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find rr exactly.

  2. Find the related angle with tan⁡−1\tan^{-1} in radian mode, then adjust for the quadrant.

  3. Round only at the end, to the accuracy asked.

Watch out for

  • Using tan⁡−1(−12−5)=1.176\tan^{-1}\left(\frac{-12}{-5}\right) = 1.176 as the argument. That points into the first quadrant.

  • Leaving the calculator in degree mode, which gives −112.6-112.6.

Polar coordinates. A point described by its distance rr from the origin and its angle θ\theta from the positive real axis has polar coordinates (r,θ)(r, \theta). So rcis⁡(θ)r\cis(\theta) is plotted at the polar coordinates (r,θ)(r, \theta). To plot it, turn to the ray at angle θ\theta and walk rr units out along it. Light circles ∣z∣=1,2,3|z| = 1, 2, 3 and rays at multiples of π4\frac{\pi}{4} or π6\frac{\pi}{6} make this quick.

Plotting in polar form: each point is rr units out along the ray at angle θ\theta.

A point PP lies on the circle ∣z∣=2|z| = 2, a quarter-turn clockwise from the positive real axis and then a further π4\frac{\pi}{4} clockwise. Which complex number is PP?

Choose one answer

Exam tip

Exact unless told otherwise

For exact-value angles in Paper 1, give the argument as an exact multiple of π\pi. Other arguments can be left in exact inverse-trigonometric form, with the quadrant accounted for. In Paper 2, give a decimal argument in radians to the accuracy asked (often 2 or 3 decimal places), and keep the modulus exact, for example 13cis⁡(−0.983)\sqrt{13}\cis(-0.983).

Summary

  • z=rcis⁡(θ)=r(cos⁡(θ)+isin⁡(θ))z = r\cis(\theta) = r(\cos(\theta) + i\sin(\theta)) with r=∣z∣>0r = |z| > 0 and θ\theta an argument, usually Arg⁡(z)\operatorname{Arg}(z).

  • Cartesian to polar: r=a2+b2r = \sqrt{a^2 + b^2}, and θ\theta from the related angle and the quadrant.

  • Polar to Cartesian: a=rcos⁡(θ)a = r\cos(\theta), b=rsin⁡(θ)b = r\sin(\theta).

  • A negative multiplier is a half-turn: −rcis⁡(θ)=rcis⁡(θ±π)-r\cis(\theta) = r\cis(\theta \pm \pi), choosing the sign that keeps the angle in (−π,π](-\pi, \pi]. The conjugate is rcis⁡(−θ)r\cis(-\theta).

  • rcis⁡(θ)r\cis(\theta) is plotted at the polar coordinates (r,θ)(r, \theta): rr units along the ray at angle θ\theta.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 70% read

Save your progress with a free account