Lesson 2 of 8 · 16 min

Vectors between points, midpoints and dividing a segment

Find the vector between two points as OB→−OA→\overrightarrow{OB} - \overrightarrow{OA}, then use it to locate midpoints, points that divide a segment in a ratio, and missing vertices, and to test for collinear points.

What you will be able to do

  • Determine AB→=OB→−OA→\overrightarrow{AB} = \overrightarrow{OB} - \overrightarrow{OA} from the coordinates of AA and BB, and find its magnitude.
  • Find the position vector of the midpoint of a segment.
  • Find the position vector of the point dividing a segment in the ratio m:nm : n.
  • Use vectors between points to find missing vertices and to show points are collinear.

Position vectors tell you where points are. The vector between two points tells you how to get from one to the other. To go from AA to BB, you can always travel back to the origin and then out to BB.

Going from AA to BB via the origin: AB→=AO→+OB→=−a∼+b∼\overrightarrow{AB} = \overrightarrow{AO} + \overrightarrow{OB} = -\tvec{a} + \tvec{b}.

Key idea

The vector between two points

AB→=OB→−OA→=b∼−a∼\overrightarrow{AB} = \overrightarrow{OB} - \overrightarrow{OA} = \tvec{b} - \tvec{a}

"Where you end minus where you start." In the figure, AB→=(51)−(13)=(4−2)\overrightarrow{AB} = \begin{pmatrix} 5 \\ 1 \end{pmatrix} - \begin{pmatrix} 1 \\ 3 \end{pmatrix} = \begin{pmatrix} 4 \\ -2 \end{pmatrix}: 4 across and 2 down, which you can count on the grid.

The distance ABAB is the magnitude ∣AB→∣|\overrightarrow{AB}|.

The points are A(2,−1)A(2, -1) and B(−3,4)B(-3, 4). Find AB→\overrightarrow{AB}.

Worked example

Find AB→\overrightarrow{AB}, the distance ABAB and a unit vector

  • Simple familiar
  • Technology free

AA is the point (−2,3)(-2, 3) and BB is the point (4,−5)(4, -5). Find AB→\overrightarrow{AB}, the distance ABAB, and the unit vector in the direction of AB→\overrightarrow{AB}.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. AB→=b∼−a∼\overrightarrow{AB} = \tvec{b} - \tvec{a}.

  2. Distance =∣AB→∣= |\overrightarrow{AB}|.

  3. Unit vector =AB→÷∣AB→∣= \overrightarrow{AB} \div |\overrightarrow{AB}|.

Watch out for

  • Computing a∼−b∼\tvec{a} - \tvec{b} gives BA→\overrightarrow{BA}, which points the opposite way.

Now go only part of the way. To reach the midpoint MM of ABAB, start at AA and travel half of AB→\overrightarrow{AB}:

OM→=a∼+12(b∼−a∼)=12(a∼+b∼).\overrightarrow{OM} = \tvec{a} + \tfrac{1}{2}(\tvec{b} - \tvec{a}) = \tfrac{1}{2}(\tvec{a} + \tvec{b}).

The midpoint's position vector is the average of the two position vectors, which is the midpoint formula you already know.

Find the position vector of the midpoint of PQPQ, where P(−3,8)P(-3, 8) and Q(7,−2)Q(7, -2).

Key idea

A point dividing a segment in a ratio

If PP lies on ABAB with AP:PB=m:nAP : PB = m : n, then PP is mm+n\dfrac{m}{m + n} of the way from AA to BB:

OP→=a∼+mm+n(b∼−a∼)=na∼+mb∼m+n.\overrightarrow{OP} = \tvec{a} + \frac{m}{m + n}(\tvec{b} - \tvec{a}) = \frac{n\tvec{a} + m\tvec{b}}{m + n}.

The midpoint is the case m=n=1m = n = 1.

Why the second form has the ratio "crossed over"

Expand the first form:

a∼+mm+nb∼−mm+na∼=(m+n)−mm+na∼+mm+nb∼=na∼+mb∼m+n.\tvec{a} + \frac{m}{m + n}\tvec{b} - \frac{m}{m + n}\tvec{a} = \frac{(m + n) - m}{m + n}\tvec{a} + \frac{m}{m + n}\tvec{b} = \frac{n\tvec{a} + m\tvec{b}}{m + n}.

The weight on a∼\tvec{a} is nn, the part of the ratio next to BB. That makes sense: if mm is small, PP is close to AA, so a∼\tvec{a} should carry most of the weight.

Worked example

Find the point dividing ABAB in the ratio 2:12 : 1

  • Simple familiar
  • Technology free

AA is (−1,4)(-1, 4) and BB is (8,−2)(8, -2). The point PP lies on ABAB with AP:PB=2:1AP : PB = 2 : 1. Find the position vector of PP.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find AB→\overrightarrow{AB}.

  2. AP:PB=m:nAP : PB = m : n means AP→=mm+nAB→\overrightarrow{AP} = \frac{m}{m + n}\overrightarrow{AB}.

  3. OP→=OA→+AP→\overrightarrow{OP} = \overrightarrow{OA} + \overrightarrow{AP}.

Watch out for

  • Using 21\frac{2}{1} instead of 23\frac{2}{3}, which puts PP outside the segment.

  • Forgetting to add OA→\overrightarrow{OA}: 23AB→\frac{2}{3}\overrightarrow{AB} is a displacement from AA, not a position.

PP divides ABAB internally in the ratio 3:23 : 2. Which expression is AP→\overrightarrow{AP}?

Choose one answer

Tip

Parallelograms and collinear points

Missing vertex. In parallelogram ABCDABCD (vertices in order), AB→=DC→\overrightarrow{AB} = \overrightarrow{DC}. So b∼−a∼=c∼−d∼\tvec{b} - \tvec{a} = \tvec{c} - \tvec{d}, which gives d∼=a∼+c∼−b∼\tvec{d} = \tvec{a} + \tvec{c} - \tvec{b}.

Collinear points. AA, BB and CC are collinear when AB→=kBC→\overrightarrow{AB} = k\overrightarrow{BC} for some scalar kk: the two vectors are parallel and share the point BB, so they lie on one line.

The points A(1,2)A(1, 2), B(3,5)B(3, 5) and C(9,k)C(9, k) are collinear. Find kk.

Common mistake

Ratio fractions

AP:PB=2:3AP : PB = 2 : 3 means PP is 25\frac{2}{5} of the way along, not 23\frac{2}{3}. Always divide by the total number of parts.

Summary

  • AB→=b∼−a∼\overrightarrow{AB} = \tvec{b} - \tvec{a}: end point minus start point. Its magnitude is the distance ABAB.

  • The midpoint of ABAB has position vector 12(a∼+b∼)\frac{1}{2}(\tvec{a} + \tvec{b}).

  • If AP:PB=m:nAP : PB = m : n, then OP→=a∼+mm+n(b∼−a∼)=na∼+mb∼m+n\overrightarrow{OP} = \tvec{a} + \frac{m}{m + n}(\tvec{b} - \tvec{a}) = \frac{n\tvec{a} + m\tvec{b}}{m + n}.

  • In parallelogram ABCDABCD, AB→=DC→\overrightarrow{AB} = \overrightarrow{DC}, so d∼=a∼+c∼−b∼\tvec{d} = \tvec{a} + \tvec{c} - \tvec{b}.

  • AA, BB, CC are collinear when AB→\overrightarrow{AB} is a scalar multiple of BC→\overrightarrow{BC}.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 80% read

Save your progress with a free account