Lesson 8 of 8 · 20 min

Forces, equilibrium and smooth inclined planes

Add forces as vectors to find a resultant, find the force that keeps a body in equilibrium, and resolve weight along and across a smooth inclined plane.

What you will be able to do

  • Find the resultant of several forces in component form, with its magnitude and direction.
  • Use the equilibrium condition ∑F∼=0∼\sum \tvec{F} = \tvec{0} to find unknown forces, including tensions in two cables.
  • Resolve the forces on a body on a smooth inclined plane parallel and perpendicular to the plane, and find the force needed to hold it still.

Forces are vectors: they have a size, measured in newtons, and a direction. When several forces act on one body, their vector sum is the resultant force. If the resultant is zero, the forces balance and the body is in equilibrium: it stays still, or keeps moving at a constant velocity.

Key idea

Equilibrium

A body is in equilibrium when

∑F∼=F∼1+F∼2+⋯+F∼n=0∼.\sum \tvec{F} = \tvec{F}_1 + \tvec{F}_2 + \dots + \tvec{F}_n = \tvec{0}.

In components, the i^\hat{\mathbf{i}} components add to zero and the j^\hat{\mathbf{j}} components add to zero. That gives two equations, so you can find two unknowns.

Forces F∼1=4i^−3j^\tvec{F}_1 = 4\hat{\mathbf{i}} - 3\hat{\mathbf{j}} N and F∼2=−i^+7j^\tvec{F}_2 = -\hat{\mathbf{i}} + 7\hat{\mathbf{j}} N act on a particle. Find the third force F∼3\tvec{F}_3 that keeps the particle in equilibrium, as xi^+yj^x\hat{\mathbf{i}} + y\hat{\mathbf{j}}, by entering xx and yy.

Worked example

Tensions in two cables holding a sign

  • Complex familiar
  • Technology free

A 20 kg sign hangs in equilibrium from two cables. The left cable makes an angle of 30∘30^\circ with the horizontal and the right cable makes an angle of 60∘60^\circ with the horizontal. Find the tension in each cable. Use g=9.8 m s−2g = 9.8\ \mathrm{m\,s^{-2}}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Draw the forces and choose axes.

  2. Resolve every force into components.

  3. Set the sum of each component to zero and solve simultaneously.

Watch out for

  • Assuming the tensions are equal, or that each holds half the weight. That is only true when the cables make equal angles.

  • Reasonableness: the steeper cable carries more of the weight, so T2>T1T_2 > T_1 should be expected.

Now put a crate on a ramp. Gravity pulls it straight down, but the crate can only move along the ramp. So instead of resolving into horizontal and vertical, resolve into components along the plane and perpendicular to it.

The forces on a block held still on a smooth plane by a force PP parallel to the plane. A smooth plane gives no friction, only the normal reaction NN.

Key idea

Resolving weight on an incline

On a plane inclined at θ\theta to the horizontal, the weight mgmg resolves into

mgsin⁡(θ) down the planeandmgcos⁡(θ) into the plane.mg\sin(\theta) \text{ down the plane} \quad \text{and} \quad mg\cos(\theta) \text{ into the plane.}

The angle between the weight and the perpendicular to the plane is θ\theta, the same as the angle of the plane.

Why the angle at the weight is θ

The weight is perpendicular to the horizontal, and the normal is perpendicular to the plane. Rotating both the horizontal and the vertical by the same angle θ\theta turns the horizontal into the plane and the vertical into the normal direction, so the angle between the weight and the normal direction is also θ\theta.

Check the extremes: on a flat surface (θ=0∘\theta = 0^\circ) the down-slope component mgsin⁡(0∘)=0mg\sin(0^\circ) = 0, and on a vertical wall (θ=90∘\theta = 90^\circ) it is the whole weight mgmg. That matches experience, and it is the quickest way to catch a sine–cosine swap.

Solving a smooth incline problem

  1. Draw the forces

    Weight mgmg straight down, normal reaction NN perpendicular to the plane, and any applied force.

  2. Choose axes along and perpendicular to the plane

    Let i^\hat{\mathbf{i}} point up the plane and j^\hat{\mathbf{j}} point away from the plane.

  3. Resolve every force onto those axes

    Weight: −mgsin⁡(θ) i^−mgcos⁡(θ) j^-mg\sin(\theta)\,\hat{\mathbf{i}} - mg\cos(\theta)\,\hat{\mathbf{j}}. Normal: Nj^N\hat{\mathbf{j}}.

  4. Set each component sum to zero

    Equilibrium gives one equation along the plane and one perpendicular to it.

Worked example

A block held on a smooth inclined plane

  • Simple familiar
  • Technology active

A 5 kg block is held at rest on a smooth plane inclined at 30∘30^\circ to the horizontal by a force PP acting up the plane, parallel to it. Find PP and the normal reaction force NN. Use g=9.8 m s−2g = 9.8\ \mathrm{m\,s^{-2}} and give NN to one decimal place.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Resolve along and perpendicular to the plane.

  2. Along: P=mgsin⁡(θ)P = mg\sin(\theta). Perpendicular: N=mgcos⁡(θ)N = mg\cos(\theta).

Watch out for

  • Swapping sine and cosine. Check: on a flat plane (θ=0∘\theta = 0^\circ) no force is needed to hold the block.

  • Writing N=mg=49N = mg = 49 N, which is only true on level ground.

A 10 kg crate is held at rest on a smooth ramp inclined at 20∘20^\circ by a rope parallel to the ramp. Find the normal reaction force on the crate, correct to one decimal place. Use g=9.8 m s−2g = 9.8\ \mathrm{m\,s^{-2}}.

in N

Round to 1 decimal place.

A 2 kg block rests on a smooth plane inclined at 25∘25^\circ, held by a horizontal force PP. Find PP, correct to two decimal places. Use g=9.8 m s−2g = 9.8\ \mathrm{m\,s^{-2}}.

in N

Round to 2 decimal places.

Common mistake

The normal force is not always mg

N=mgN = mg only on a horizontal surface with no other vertical forces. On an incline, N=mgcos⁡(θ)N = mg\cos(\theta) if the other forces are parallel to the plane, and larger if a force pushes the body into the plane, such as a horizontal push.

Note

What this topic leaves out

The syllabus excludes pulleys and connected bodies here, and smooth planes mean no friction. Friction and connected particles come later, in physics and in Unit 3 and 4 mechanics.

Summary

  • The resultant force is the vector sum of all the forces; equilibrium means ∑F∼=0∼\sum \tvec{F} = \tvec{0}.

  • In equilibrium, the i^\hat{\mathbf{i}} components and the j^\hat{\mathbf{j}} components each sum to zero: two equations for two unknowns.

  • On a smooth incline at θ\theta, the weight has components mgsin⁡(θ)mg\sin(\theta) down the plane and mgcos⁡(θ)mg\cos(\theta) into the plane.

  • A smooth plane exerts only a normal reaction, perpendicular to the plane.

  • Resolve along and perpendicular to the plane, and check θ=0∘\theta = 0^\circ to make sure sine and cosine are the right way round.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 80% read

Save your progress with a free account