Lesson 11: Transformers and power transmission
Why the grid transmits at high voltage
SkillTransformers and power transmission
Worked example
A power station sends to a city through transmission lines with a total resistance of . Compare the power lost in the lines when the power is transmitted at and at , and explain why the grid uses step-up transformers.
Step 1: Current at 25 kV
The lines must carry the whole power, P = VI, so the transmission voltage sets the current.
Step 2: Loss at 25 kV
, which is , or 32% of the power sent.
Step 3: Repeat at 250 kV
, so , which is , or 0.32%.
Step 4: Explain
Raising the voltage 10 times cuts the current 10 times, and because the loss depends on , it cuts the loss 100 times. Transformers make this possible: step-up transformers raise the voltage at the power station, and step-down transformers at substations lower it again for safe use in homes.
Answer
At the lines lose ; at they lose , a hundred times less. Stepping the voltage up lowers the current, and the loss falls with the square of the current.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Find the line current from at each voltage.
Find the loss from .
Compare, and link the comparison to transformers.
Watch out for
Using with the transmission voltage. The is not across the line resistance; most of it is across the load.