Lesson 3: Alpha, beta and gamma radiation
Identify radiation from absorber data
SkillsAlpha, beta and gamma radiationDecay graphs and radiation experiments
Worked example
A student measures the count rate from a radioactive source with different absorbers between the source and a GM tube. The background count rate is 25 counts per minute.
- No absorber: 480 counts per minute
- Sheet of paper: 478 counts per minute
- 3 mm of aluminium: 160 counts per minute
- 2 cm of lead: 60 counts per minute
Determine which types of radiation the source emits. Justify your answer.
Step 1: Correct for background
Subtract 25 from each reading: no absorber 455, paper 453, aluminium 135, lead 35 counts per minute.
Background radiation reaches the detector whatever absorber is used, so it must be removed before comparing.
Step 2: Test for alpha
Paper reduces the corrected count rate from 455 to 453, a difference within random variation. So there is no alpha radiation.
Step 3: Test for beta
3 mm of aluminium reduces it from 453 to 135. Radiation that passes through paper but is stopped by a few mm of aluminium is beta.
Step 4: Test for gamma
Radiation still gets through the aluminium (135), and 2 cm of lead reduces but does not stop it (35). That is gamma.
Answer
The source emits beta and gamma radiation but no alpha. (Cobalt-60 behaves like this.)
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Subtract background from every reading.
Paper stops alpha; a few mm of aluminium stops beta; lead reduces gamma.
Look for a significant drop at each absorber.
Watch out for
Not subtracting background, then claiming lead stops gamma when only background is left.
Treating a drop of 2 counts per minute as evidence of alpha. Random decay makes small differences meaningless.