Lesson 8: Thermal equilibrium and mixing
A hot copper block dropped into water
SkillsMixing and thermal equilibriumSpecific heat capacity
Worked example
A 0.150 kg copper block at 100 °C is dropped into 0.200 kg of water at 20.0 °C in an insulated cup. The specific heat capacity of copper is . Ignore the cup. Calculate the final temperature of the water.
Step 1: Set up the energy balance
Energy lost by the copper = energy gained by the water:
Step 2: Substitute
Step 3: Simplify each side
, so
The products (57.75 and 836 J per K) tell you how much energy each object exchanges per kelvin. Water's is about 14 times bigger.
Step 4: Solve for T
, so
Step 5: Check it makes sense
The water's temperature rises only 5.2 K while the copper falls by 74.8 K. That fits: the water needs far more energy per kelvin, so it changes temperature far less.
Answer
The final temperature is about 25.2 °C.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Energy lost by the hot object = energy gained by the cold object.
Each side uses its own mass and specific heat capacity.
Expand, collect the terms and solve.
Watch out for
Cancelling c when the substances are different. It only cancels when both are the same material.
Expecting the final temperature to be halfway between 20 °C and 100 °C.