Lesson 8 of 8 · 17 min

Problems in three dimensions

Find the flat triangles hidden in a three-dimensional situation, horizontal and vertical, and solve them one after another.

What you will be able to do

  • Recognise the right angle where a vertical line meets horizontal ground, even when it does not look square in a drawing.
  • Split a three-dimensional problem into a horizontal triangle and a vertical triangle that share a side.
  • Find heights from bearings or horizontal angles combined with an angle of elevation.
  • Find lengths and angles inside solids such as cuboids, using the cosine rule where no right angle is available.

A fire tower, a phone mast, a drone hovering over a paddock: the interesting triangle is usually standing up, but the information you can measure is on the ground. Three-dimensional problems link the two. The skill is not new trigonometry; it is seeing which flat triangles to use, and in which order.

Key idea

Two kinds of triangle

  • A horizontal triangle lies on the ground. Distances and angles between directions (bearings, angles measured with a theodolite) live here. It is usually not right-angled, so it needs the sine or cosine rule.
  • A vertical triangle stands up from the ground, such as foot of mast, top of mast and observer. A vertical line meets the ground at 90∘90^\circ, so this triangle is right-angled, and holds the angle of elevation.

The two triangles share a side along the ground. Solve the one you have enough information for, then pass the shared side across.

The ground triangle ABOABO is horizontal; the triangle AOTAOT is vertical, with its right angle at OO. They share the side AOAO. Angles drawn in a 3D sketch are not to scale.

In the figure above, you want the height hh of the mast. Which triangle should you solve first?

Choose one answer

Worked example

The height of a mast from the ground

  • Complex unfamiliar
  • Technology active

Points AA and BB are 150 m apart on level ground, and OO is the foot of a vertical mast OTOT. A surveyor measures ∠OAB=52∘\angle OAB = 52^\circ and ∠OBA=71∘\angle OBA = 71^\circ, and the angle of elevation of TT from AA is 21∘21^\circ.

(a) Find the height of the mast, correct to one decimal place.

(b) Find the angle of elevation of TT from BB, correct to one decimal place.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Identify the horizontal triangle and the vertical right-angled triangles.

  2. Solve the horizontal triangle for the shared sides.

  3. Use tan⁡\tan in each vertical triangle.

Watch out for

  • Using ABAB instead of AOAO in the vertical triangle: AA, BB and TT do not form a right angle.

  • Trusting the drawn angles, which are distorted in a 3D sketch.

Common mistake

Treating a sketched angle as true

In a 3D sketch, the right angle at the foot of a mast is drawn as a slanted corner, and a 52∘52^\circ angle on the ground may look like 15∘15^\circ. Trust the information, not the picture: every vertical line meets horizontal ground at 90∘90^\circ.

Solids work the same way. In a cuboid, each face is a rectangle, so face diagonals come from Pythagoras' theorem. A triangle that cuts through the inside of the solid, joining three corners, usually has no right angle, and that is where the cosine rule comes in.

A cuboid 8 cm by 6 cm by 5 cm. The triangle BDEBDE is made of three face diagonals.

In the cuboid above, find the angle between the space diagonal AGAG and the base ABCDABCD, correct to one decimal place.

in circ

Round to 1 decimal place.

In the same cuboid, find the angle θ=∠BED\theta = \angle BED, correct to one decimal place.

in circ

Round to 1 decimal place.

Exam tip

Draw the triangles flat

For each triangle you use, draw it again flat beside the 3D sketch, label it with what you know, and say what kind it is: "horizontal triangle ABOABO" or "vertical triangle AOTAOT, right angle at OO". This makes your reasoning visible and earns method marks.

Summary

  • Split the problem into horizontal triangles (bearings, ground angles) and vertical triangles (heights, elevations).

  • A vertical line meets horizontal ground at 90∘90^\circ, so vertical triangles are right-angled.

  • Solve whichever triangle has enough information, then carry the shared side to the next.

  • The angle between a line and a plane is the angle between the line and its projection on the plane.

  • Triangles through the inside of a solid usually need the cosine rule.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 80% read

Save your progress with a free account