Lesson 7 of 7 · 20 min

Solving problems with the rules

Use the chain, product and quotient rules to find tangents and normals, stationary points and rates of change in context, and check that answers are reasonable.

What you will be able to do

  • Find the equations of the tangent and the normal to a curve built from composites, products or quotients.
  • Find stationary points by setting each factor of a factorised derivative to zero, remembering that a quotient is zero only when its numerator is.
  • Interpret derivatives as rates of change in context, with units, and check answers against the situation.

The new rules don't change what a derivative means. f′(a)f'(a) is still the gradient of the tangent at x=ax = a and the instantaneous rate of change there, and stationary points are still where f′(x)=0f'(x) = 0. What the rules change is the range of models you can handle: a drug concentration 20tt2+4\frac{20t}{t^2 + 4}, a cable length x2+9\sqrt{x^2 + 9}, or a curve like xx+3x\sqrt{x + 3}.

Tangents and normals

  1. Find the point

    Substitute x=ax = a into f(x)f(x) to get yy.

  2. Find the gradient

    Differentiate with the right rule, then substitute x=ax = a: m=f′(a)m = f'(a).

  3. Write the line

    Tangent: y−f(a)=m(x−a)y - f(a) = m(x - a). Normal: gradient −1m-\frac{1}{m}, through the same point.

Worked example

Tangent and normal to y=xx+3y = x\sqrt{x + 3} at x=1x = 1

  • Complex familiar
  • Technology free

Find the equations of the tangent and the normal to y=xx+3y = x\sqrt{x + 3} at the point where x=1x = 1.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the point (a,f(a))(a, f(a)).

  2. Differentiate, then evaluate m=f′(a)m = f'(a).

  3. Tangent through the point with gradient mm; normal with gradient −1m-\frac{1}{m}.

Watch out for

  • Using 12x+3\frac{1}{2\sqrt{x + 3}} as the whole derivative, which forgets the product rule.

  • Giving the normal gradient as −94-\frac{9}{4} or 49\frac{4}{9}.

Find the gradient of the normal to y=(2x−3)3y = (2x - 3)^3 at the point where x=2x = 2.

Key idea

Stationary points from a factorised derivative

  • Products. f′(x)=(x+2)2(x−1)3(7x+5)=0f'(x) = (x + 2)^2(x - 1)^3(7x + 5) = 0 when any factor is zero: x=−2x = -2, x=1x = 1 or x=−57x = -\frac{5}{7}.
  • Quotients. N(x)D(x)=0\frac{N(x)}{D(x)} = 0 only when N(x)=0N(x) = 0 and D(x)≠0D(x) \ne 0. Where D(x)=0D(x) = 0 the derivative is undefined, and usually the function is too.
  • The sign of each factor either side of a zero tells you the nature of the point (from Unit 2 Topic 4).

The derivative of y=x(x−2)3y = x(x - 2)^3 is dydx=2(x−2)2(2x−1)\frac{dy}{dx} = 2(x - 2)^2(2x - 1). Find the xx-coordinates of the stationary points.

x =

Press Enter or type a comma after each value.

Worked example

Modelling the concentration of a drug

  • Complex unfamiliar
  • Technology free

The concentration of a drug in a patient's blood tt hours after a tablet is taken is modelled by

C(t)=20tt2+4 mg/L,t≥0.C(t) = \frac{20t}{t^2 + 4} \text{ mg/L}, \quad t \ge 0.

(a) Find C′(t)C'(t) in factorised form.

(b) Find the rate of change of the concentration after 1 hour and after 4 hours, and interpret each.

(c) Find the maximum concentration and when it occurs, justifying that it is a maximum.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Differentiate the model with the quotient rule and factorise.

  2. Evaluate the derivative for rates; state units and whether the quantity is rising or falling.

  3. Solve derivative = 0 within the domain, then use the sign of the derivative to justify the nature.

Watch out for

  • Reporting C(1)C(1) instead of C′(1)C'(1) as the rate.

  • Giving t=−2t = -2 as a solution: it is outside the domain.

  • Saying "the rate is −0.6-0.6" without saying the concentration is decreasing.

Interactive

A concentration that rises and falls

Here the horizontal axis is time tt in hours. The tangent gradient is the rate of change of concentration in mg/L per hour. It is positive until t=2t = 2, zero at the peak, then negative as the drug is cleared. Check the gradient is 2.4 at t=1t = 1.

A function has derivative f′(x)=(x−4)(x+1)(x−2)2f'(x) = \frac{(x - 4)(x + 1)}{(x - 2)^2}. Where does ff have stationary points?

Choose one answer

Worked example

The cheapest route for a power cable

  • Complex unfamiliar

An island II is 3 km offshore from the nearest point PP on a straight coastline. A town TT is on the coast 8 km from PP. A power cable will run underwater from II to a point QQ on the coast, xx km from PP, and then along the coast to TT. Underwater cable costs $500 000 per km and cable on land costs $400 000 per km.

(a) Show that the cost, in thousands of dollars, is C(x)=500x2+9+400(8−x)C(x) = 500\sqrt{x^2 + 9} + 400(8 - x) for 0≤x≤80 \le x \le 8.

(b) Find the value of xx that minimises the cost, and the minimum cost.

(c) Evaluate the reasonableness of your answer.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Build the model from the diagram with Pythagoras.

  2. Differentiate with the chain rule and solve the derivative equal to zero.

  3. Compare the stationary value with the endpoints of the domain, and interpret in context.

Watch out for

  • Forgetting the derivative of 400(8−x)400(8 - x) is −400-400, not 0.

  • Not checking the endpoints, so not knowing whether the stationary point is the global minimum.

  • Mixing units: the model is in thousands of dollars.

Common mistake

Losing marks in applications

  • Using f(a)f(a) as the gradient, or f′(a)f'(a) as the yy-coordinate of the point.
  • Writing the normal with gradient 1m\frac{1}{m} or −m-m instead of −1m-\frac{1}{m}.
  • Setting the denominator of a quotient to zero to find stationary points.
  • Giving a rate without units, or without saying whether the quantity is increasing or decreasing.

Exam tip

Evaluate reasonableness

QCAA questions often finish with "evaluate the reasonableness of your answer". Check that the value lies inside the model's domain, compare it with the endpoints of the domain, and ask whether the size and sign make sense in context. A concentration that peaks at 5 mg/L two hours after a tablet is plausible; one that peaks at a negative time is not.

Summary

  • The gradient at x=ax = a is f′(a)f'(a); the tangent is y−f(a)=f′(a)(x−a)y - f(a) = f'(a)(x - a) and the normal has gradient −1f′(a)-\frac{1}{f'(a)}.

  • Factorise the derivative, then set each factor to zero to find stationary points.

  • A quotient is zero only where its numerator is zero; where its denominator is zero it is undefined.

  • In context, a derivative is a rate with units of output per input. Interpret its sign.

  • Compare a stationary value with the endpoints of the domain, and check it makes sense.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 7 of 70% read

Save your progress with a free account