Mathematical Methods · Unit 2 · Topic 5

Further differentiation

Differentiate composites, products and quotients of power and polynomial functions with the chain, product and quotient rules, combine the rules, and give derivatives in simplest and factorised form.

  • 7 lessons
  • 1 h 56 min of lessons
  • 13 worked examples
  • 11 hours in the syllabus
0 of 7

Start here

Composite functions and the chain rule

Lesson 1 of 7 · 16 min

Start the topic

Lessons

7
  1. Composite functions and the chain rule (up next)

    See why a function of a function needs a new rule, split it into inside and outside functions, and differentiate it with dydx=dydu×dudx\frac{dy}{dx} = \frac{dy}{du} \times \frac{du}{dx}.

  2. Powers, roots and reciprocals of functions

    Use the chain rule in one line for any power of a function, including square roots and reciprocals of polynomials, and find gradients at a point.

  3. The product rule

    See from a growing rectangle why the derivative of a product is u dv/dx + v du/dx, then use the product rule on products of power and polynomial functions.

  4. The quotient rule

    Differentiate one function divided by another with vdudx−udvdxv2\frac{v\frac{du}{dx} - u\frac{dv}{dx}}{v^2}, see where the rule comes from, and know when splitting or the chain rule is quicker.

  5. Combining the rules

    Read the structure of a function from the outside in, then use the chain rule inside the product or quotient rule, choosing the quickest route.

  6. Simplest and factorised form

    Tidy derivatives from the product, quotient and chain rules into factorised form by taking out the lowest power of each common factor, and use that form to find where the gradient is zero.

  7. Solving problems with the rules

    Use the chain, product and quotient rules to find tangents and normals, stationary points and rates of change in context, and check that answers are reasonable.

  8. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

The power rule handles x5x^5 and 3x2−4x+13x^2 - 4x + 1 in a line. It struggles with (2x+1)20(2x + 1)^{20}, x3x2+4x^3\sqrt{x^2 + 4} or x2x−1\frac{x^2}{x - 1}. You could expand the first one, but it has 21 terms. The other two can't be written as a sum of powers of xx at all.

This topic gives you three rules that cover every way functions are built from simpler pieces. The chain rule differentiates a function of a function, such as (2x+1)20(2x + 1)^{20}. The product rule differentiates one function multiplied by another, and the quotient rule one function divided by another. You will see why each rule works, use each one on its own, then combine them on harder functions and tidy the result into simplest and factorised form, which is what makes a derivative useful for finding stationary points, tangents and rates. In Unit 3 you will use exactly the same rules with exponential, logarithmic and trigonometric functions.

Before you start

Builds on Binomial expansion and cubic functions, Functions and relations, Exponential functions, Introduction to differential calculus and Applications of differential calculus.

  • The power rule ddx(xn)=nxn−1\frac{d}{dx}\left(x^n\right) = nx^{n-1} for any rational nn, and the sum and constant multiple rules (Unit 2 Topic 3).
  • Index laws, including x=x12\sqrt{x} = x^{\frac{1}{2}} and 1xn=x−n\frac{1}{x^n} = x^{-n} (Unit 2 Topic 1).
  • Composite functions f(g(x))f(g(x)) and function notation (Unit 1 Topic 3).
  • Factorising, including taking out a common factor and factorising quadratics (Unit 1).
  • The derivative as the gradient of the tangent, equations of tangents and normals, and stationary points where f′(x)=0f'(x) = 0 (Unit 2 Topics 3 and 4).

What QCAA says you need to know4 dot points

Differentiation rules

11 hours

Subject matter from the Mathematical Methods General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Spotting composite functions

    Recognise a function of a function and split it into an inside function u = g(x) and an outside function y = f(u).

    Practise
  • The chain rule

    Differentiate powers, roots and reciprocals of polynomials with dy/dx = dy/du × du/dx.

    Practise
  • The product rule

    Differentiate a product of power and polynomial functions with u dv/dx + v du/dx.

    Practise
  • The quotient rule

    Differentiate a quotient of power and polynomial functions with (v du/dx − u dv/dx)/v².

    Practise
  • Combining the rules

    Use the chain rule inside the product or quotient rule, and choose the most efficient rule for a function.

    Practise
  • Simplest and factorised form

    Take out common factors with the lowest powers so a derivative is a product of simple factors.

    Practise
  • Gradients, tangents and stationary points

    Use the rules to find gradients, tangent and normal lines, stationary points and rates of change in context.

    Practise

Worked examples13

All 13

Common mistakes

Forgetting the derivative of the inside

ddx(3x−1)5=5(3x−1)4×3=15(3x−1)4\frac{d}{dx}(3x - 1)^5 = 5(3x - 1)^4 \times 3 = 15(3x - 1)^4, not 5(3x−1)45(3x - 1)^4. Multiply by dudx\frac{du}{dx} every time.

Differentiating the inside instead of keeping it

The bracket stays as it is in the outside derivative: ddx(x2+1)3=3(x2+1)2×2x\frac{d}{dx}(x^2 + 1)^3 = 3(x^2 + 1)^2 \times 2x, not 3(2x)23(2x)^2.

Multiplying the derivatives of a product

The derivative of uvuv is not dudx×dvdx\frac{du}{dx} \times \frac{dv}{dx}. Check with x×x=x2x \times x = x^2: the derivative is 2x2x, but 1×1=11 \times 1 = 1.

Swapping the order in the quotient rule

The numerator is vdudx−udvdxv\frac{du}{dx} - u\frac{dv}{dx}. Swapping the two terms changes the sign of the whole derivative.

Squaring only part of the denominator

The denominator in the quotient rule is v2v^2, the whole denominator squared: for xx2+1\frac{x}{x^2 + 1} it is (x2+1)2(x^2 + 1)^2, not x4+1x^4 + 1.

Taking out the wrong power of a common bracket

From 3(x+2)2(x−1)4+4(x+2)3(x−1)33(x + 2)^2(x - 1)^4 + 4(x + 2)^3(x - 1)^3, take out (x+2)2(x−1)3(x + 2)^2(x - 1)^3, the lowest power of each bracket, not the highest.

Losing a minus sign through the bracket

In (x2+1)(2)−(2x−3)(2x)(x^2 + 1)(2) - (2x - 3)(2x), the minus applies to the whole product: −(4x2−6x)=−4x2+6x-(4x^2 - 6x) = -4x^2 + 6x.

Using the quotient rule when the denominator is a single power of x

x3−4x2\frac{x^3 - 4}{x^2} is quicker split into x−4x−2x - 4x^{-2}. The quotient rule gives the same answer with more chances to slip.

Exam tips

  1. All three rules are on the QCAA formula sheet. Write the rule with your uu, vv, dudx\frac{du}{dx} and dvdx\frac{dv}{dx} identified first: markers award a method mark for setting it up correctly.

  2. "Simplest and factorised form" or "factorise fully" means take out every common factor, including numbers and brackets to their lowest powers. A correct but expanded or unfactorised derivative usually loses the final mark.

  3. To find stationary points, factorise the derivative and set each factor to zero. Remember a quotient is zero only when its numerator is zero, and is undefined where its denominator is zero.

  4. Paper 1 is technology-free: expect to differentiate by hand and simplify exactly. In Paper 2, use the graphics calculator to check a derivative at a point (the ddx\frac{d}{dx} template), but the rule and working still earn the marks.

  5. "Show that" questions give you the answer. Every step from the rule to the given form must be visible, especially the factorising.

  6. Before you choose a rule, see whether expanding or splitting a fraction makes the function a plain sum of powers. Simpler working means fewer errors.

  7. Check reasonableness: substitute a value of xx into your derivative and compare with the gradient of a quick sketch or a calculator value.

Where this shows up

  • Engineers differentiate composite functions whenever one quantity depends on another that depends on time, such as the area of a ripple whose radius grows with time.

  • Economists use the product rule for revenue, price times quantity, when both change with the number of items sold.

  • The quotient rule gives the rate of change of averages and ratios, such as average cost per item, or the concentration of a drug as dose and volume change.

  • Physicists find velocity from displacement models built from products and powers, such as damped motion and projectile paths.

  • Designers of roads and rail curves use derivatives of square-root and rational functions to control how steeply a track bends.

Save your progress with a free account