Lesson 5 of 8 · 18 min

The nature of stationary points

Decide whether each stationary point is a local maximum, a local minimum or a stationary point of inflection by testing the sign of the first derivative on each side.

What you will be able to do

  • Describe the three types of stationary point by how the gradient changes around them.
  • Draw a sign diagram (gradient table) for f′(x)f'(x) with valid test values.
  • Determine the nature of every stationary point of a polynomial or power function.

Knowing that the tangent is flat at a point doesn't tell you what the curve is doing there. It might be the top of a hill, the bottom of a valley, or a ledge where the curve pauses and then carries on in the same direction. To tell them apart, look at the gradient just before and just after the point.

Interactive

Watch the gradient change sign

Drag the point slowly through x=−1x = -1, then through x=1x = 1. At x=−1x = -1 the gradient goes from positive to negative: a hilltop. At x=1x = 1 it goes from negative to positive: a valley floor.

The three kinds of stationary point, read from left to right.
Sign of f′(x)f'(x) around the pointShapeNature
+    0    −+ \;\; 0 \;\; -rises, flattens, fallsLocal maximum
−    0    +- \;\; 0 \;\; +falls, flattens, risesLocal minimum
+    0    ++ \;\; 0 \;\; + or −    0    −- \;\; 0 \;\; -flattens, then keeps going the same wayStationary point of inflection

Key idea

The first derivative test

Suppose f′(c)=0f'(c) = 0. Look at the sign of f′(x)f'(x) just to the left and just to the right of x=cx = c.

  • Positive then negative: (c,f(c))(c, f(c)) is a local maximum.
  • Negative then positive: (c,f(c))(c, f(c)) is a local minimum.
  • The same sign on both sides: (c,f(c))(c, f(c)) is a stationary point of inflection.

Local maxima and minima are also called turning points.

Set out the evidence in a gradient table. List the stationary xx-values, and pick one test value in each gap between them (and beyond them). Each test value must sit between neighbouring stationary points, otherwise it tells you about the wrong point.

Worked example

Classifying the stationary points of y=−x3+3x+2y = -x^3 + 3x + 2

  • Simple familiar
  • Technology free

Find the stationary points of y=−x3+3x+2y = -x^3 + 3x + 2 and determine their nature.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the stationary points.

  2. Choose a test value in each interval and find the sign of the derivative.

  3. +0−+0- is a local maximum, −0+-0+ a local minimum, and the same sign on both sides a stationary point of inflection.

Watch out for

  • Assuming the left-hand point is the maximum, as it is for a cubic with a positive leading coefficient. Here the leading coefficient is negative, so the order is reversed.

The curve y=x3−6x2+9x+1y = x^3 - 6x^2 + 9x + 1 has dydx=3(x−1)(x−3)\frac{dy}{dx} = 3(x - 1)(x - 3). Find the coordinates of its local maximum.

A repeated factor in f′(x)f'(x) is a warning sign. A squared factor such as (x−c)2(x - c)^2 is never negative, so it doesn't change sign at x=cx = c. If nothing else changes sign there either, the point is a stationary point of inflection.

y=x4−4x3y = x^4 - 4x^3 has dydx=4x2(x−3)\frac{dy}{dx} = 4x^2(x - 3): a stationary point of inflection at (0,0)(0, 0) and a local minimum at (3,−27)(3, -27).

Worked example

A stationary point that is not a turning point

  • Complex familiar
  • Technology free

Find the stationary points of y=x4−4x3y = x^4 - 4x^3 and determine their nature.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Factorise the derivative fully.

  2. Test both sides of each stationary point, using values between neighbouring stationary points.

  3. No sign change means a stationary point of inflection.

Watch out for

  • Dividing 4x3−12x2=04x^3 - 12x^2 = 0 by x2x^2 and losing x=0x = 0.

  • Calling (0,0)(0, 0) a maximum because it is "above" the minimum. Check the signs.

A function has derivative f′(x)=(x−2)2(x+1)f'(x) = (x - 2)^2(x + 1). What is the nature of the stationary point at x=2x = 2?

Choose one answer

Common mistake

Test values that skip a stationary point

For f′(x)=3(x−1)(x−3)f'(x) = 3(x - 1)(x - 3), testing x=0x = 0 and x=4x = 4 to classify x=1x = 1 is wrong: x=4x = 4 is past the other stationary point. Use a value between 11 and 33, such as x=2x = 2.

Exam tip

Show the signs

"Determine the nature" needs evidence. Write the test values, the value (or at least the sign) of f′(x)f'(x) at each, and a conclusion for each point. Saying "it looks like a maximum on my calculator" earns nothing. In Unit 3 you will also meet the second derivative test.

Summary

  • Classify a stationary point by the sign of f′(x)f'(x) on each side: +0−+0- local maximum, −0+-0+ local minimum, same sign both sides stationary point of inflection.

  • Choose test values between neighbouring stationary points and show them in a gradient table.

  • A squared factor (x−c)2(x - c)^2 in f′(x)f'(x) does not change sign at cc, which often signals a stationary point of inflection.

  • Give each stationary point with both coordinates and its nature.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 80% read

Save your progress with a free account