Lesson 1 of 8 · 15 min

Instantaneous rates of change in context

Find how fast a quantity is changing at a given instant, interpret the rate with units and direction, and find when the rate takes a given value.

What you will be able to do

  • Find the instantaneous rate of change of a quantity at a given input by evaluating its derivative.
  • Interpret the sign, size and units of a rate of change in context.
  • Find when a rate of change takes a given value by solving f′(x)=kf'(x) = k.

A weather app says the temperature is 24 °C and rising at 2 degrees per hour. The first number is a value. The second is a rate: how fast the value is changing at that moment. In the last topic you learnt that the derivative gives exactly this. Now you will use it to answer questions about real quantities.

A ball is thrown straight up. Its height after tt seconds is h(t)=40t−5t2h(t) = 40t - 5t^2 metres. The gradient of the height–time graph at any instant is how fast the height is changing then, in metres per second.

Interactive

How fast is the ball rising?

Here the horizontal axis is time tt (seconds) and the vertical axis is height hh (metres). Drag the point. Find when the ball is rising at 20 m/s, when it stops rising, and when it is falling at 30 m/s. Then check with h′(t)=40−10th'(t) = 40 - 10t.

Key idea

The instantaneous rate of change

If a quantity QQ depends on tt, then the instantaneous rate of change of QQ at t=at = a is

Q′(a), the value of dQdt at t=a.Q'(a), \text{ the value of } \frac{dQ}{dt} \text{ at } t = a.
  • Its units are units of QQ per unit of tt: litres per minute, dollars per item, metres per second.
  • Its sign tells you the direction: positive means QQ is increasing at that instant, negative means it is decreasing.

For the ball, h′(t)=40−10th'(t) = 40 - 10t. At t=2t = 2, h′(2)=20h'(2) = 20: the ball is rising at 20 m/s. At t=7t = 7, h′(7)=−30h'(7) = -30: the ball is falling at 30 m/s. The negative sign carries the direction, so in words you say "falling at 30 m/s" rather than "rising at −30-30 m/s".

The mass of a crystal growing in a solution is M(t)=0.2t3+tM(t) = 0.2t^3 + t milligrams after tt days. Find the rate at which its mass is increasing when t=3t = 3.

in mg per day

Worked example

How fast is the tank draining?

  • Simple familiar
  • Technology free

A tank is drained through a valve at the bottom. The volume of water left in the tank tt minutes after the valve is opened is

V(t)=1800−60t+0.5t2 litres,0≤t≤60.V(t) = 1800 - 60t + 0.5t^2 \text{ litres}, \qquad 0 \le t \le 60.

(a) Find the rate at which the volume is changing when t=10t = 10, and interpret your answer.

(b) When is the water draining at 20 litres per minute?

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Differentiate the model to get the rate function.

  2. For a rate at a given time, substitute that time into the derivative.

  3. For when the rate is kk, solve derivative =k= k, using the sign for direction.

  4. Answer with units and in words.

Watch out for

  • Writing V′(t)=20V'(t) = 20 in (b). The volume is falling, so the rate is −20-20; solving V′(t)=20V'(t) = 20 gives t=80t = 80, outside the domain.

  • Substituting into V(t)V(t) for a rate: V(10)=1250V(10) = 1250 litres is how much water is left, not how fast it is leaving.

You can also work backwards. To find when the rate has a particular value kk, solve Q′(t)=kQ'(t) = k. Then check that your answer lies in the domain of the model.

Worked example

An oven heating up

  • Complex familiar
  • Technology free

The temperature of an oven tt minutes after it is switched on is modelled by

T(t)=20+18t−0.3t2  ∘C,0≤t≤30.T(t) = 20 + 18t - 0.3t^2 \;^\circ\text{C}, \qquad 0 \le t \le 30.

(a) How fast is the temperature rising 10 minutes after the oven is switched on?

(b) Find the temperature of the oven at the moment it is heating up at 6 °C per minute.

(c) What happens to the rate of heating at the end of the 30 minutes, and what does this suggest about the oven?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. A rate question uses the derivative; a value question uses the original function.

  2. For "when is the rate kk", solve the derivative equal to kk, then use the original function if a value is asked for.

  3. Interpret a zero rate as the quantity levelling off.

Watch out for

  • Giving t=20t = 20 as the answer to (b). The question asks for the temperature at that time.

  • Dropping the units: rates need °C per minute, temperatures need °C.

Common mistake

The value or the rate?

  • "How much", "how many" or "what is the temperature" asks for a value: substitute into Q(t)Q(t).
  • "How fast", "at what rate" or "rate of change" asks for a rate: substitute into Q′(t)Q'(t).
  • "Over the first 10 minutes" asks for an average rate: Q(10)−Q(0)10−0\frac{Q(10) - Q(0)}{10 - 0}.

Mixing these up is the most common way to lose every mark on a rates question.

The fuel in a car's tank is F(t)F(t) litres, tt hours after a trip starts. Which statement is the correct interpretation of F′(2)=−6F'(2) = -6?

Choose one answer

Without technology

Differentiate by hand with the power rule, then substitute. In Paper 1 every model in this topic is a polynomial or a simple power function, so this is always possible.

With technology

A graphics calculator can evaluate dydx\frac{dy}{dx} at a point from the graph or from a calculation screen. Use it in Paper 2 to find or check a rate, and write down the derivative you are evaluating as well as the value.

Exam tip

A complete answer has three parts

Give the value, the units and a sentence in context: "When t=10t = 10, the water is draining at 50 litres per minute." A bare number usually misses the communication mark.

Summary

  • The instantaneous rate of change of QQ at t=at = a is Q′(a)Q'(a): differentiate, then substitute.

  • Units are "units of QQ per unit of tt". The sign tells you whether QQ is increasing or decreasing at that instant.

  • To find when the rate equals kk, solve Q′(t)=kQ'(t) = k and check the answer is in the domain.

  • Read the wording carefully: a value uses Q(t)Q(t), a rate uses Q′(t)Q'(t), and an average rate uses a chord.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 1 of 80% read

Save your progress with a free account