Lesson 7: Volume and capacity of prisms and cylinders
How much does the tank level rise after rain?
SkillsVolume of prisms and cylindersUnits and capacityMeasurement in context
Worked example
A shed roof covers a rectangle 12 m by 8 m when seen from above. All the rain that falls on it runs into a cylindrical tank with an internal diameter of 2.2 m. During a storm, 25 mm of rain falls.
(a) How many litres of water run off the roof?
(b) By how much does the water level in the tank rise? Give your answer to the nearest centimetre.
Step 1: Model the rain as a prism
The rain that lands on the roof would make a layer 25 mm deep over a 12 m by 8 m rectangle. That layer is a rectangular prism.
Rainfall is measured as the depth of water that would collect on flat ground, so the volume is the area it falls on times that depth.
Step 2: Convert to one unit
Step 3: Volume of rain
L
Step 4: Set up the tank volume
In the tank, the same forms a cylinder of radius m and unknown height :
Step 5: Solve for the rise
m
Step 6: Check that it makes sense
The roof covers and the tank floor is about , about 25 times smaller. So the water should stand about 25 times deeper than the rain: , close to 63 cm.
Answer
(a) 2400 L. (b) The water level rises by about 63 cm.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Volume of rain = catchment area × rainfall depth, in the same units.
L.
For the rise, set equal to the volume and solve for .
Watch out for
Multiplying by 25 instead of 0.025: convert millimetres of rain to metres first.
Using the diameter, 2.2 m, as the radius.