Lesson 11: Electrolysis calculations

How long to silver-plate a medal

SkillsElectrolysis calculationsElectrolytic cells and products

Worked example

  • Complex unfamiliar
  • Technology active

A medal with a total surface area of 25.0 cm225.0\unit{cm^2} is to be silver-plated to a thickness of 0.010 mm0.010\unit{mm}, using a current of 0.150 A0.150\unit{A}. The density of silver is 10.5 g cm−310.5\unit{g\,cm^{-3}}.

(a) Describe the electrolytic cell you would use.

(b) Calculate how long the current must flow, in minutes.

1 of 5 steps
  1. Step 1: Set up the cell

    The medal is the cathode (joined to the negative terminal), a silver bar is the anode, and the electrolyte is a solution of silver ions such as AgNOX3(aq)\ce{AgNO3(aq)}. At the cathode AgX+(aq)+eX−→Ag(s)\ce{Ag+(aq) + e- -> Ag(s)}; at the anode Ag(s)→AgX+(aq)+eX−\ce{Ag(s) -> Ag+(aq) + e-}.

Try a similar one

A fresh question of the same kind, checked as you answer, with hints and a full solution.

Method

  1. Work out the mass of metal needed from the volume and density.

  2. Mass to moles, then moles of electrons from the half-equation.

  3. q=n(e−)Fq = n(e^-)F, then t=qIt = \frac{q}{I}, and convert to minutes.

Watch out for

  • Converting 0.010 mm0.010\unit{mm} to 0.10 cm0.10\unit{cm}: there are 10 mm in a centimetre, so it is 0.0010 cm0.0010\unit{cm}.

  • Making the medal the anode, where it would dissolve instead of being plated.

Save your progress with a free account