Lesson 11: Electrolysis calculations
Gas volumes from the electrolysis of water
SkillsElectrolysis calculationsElectrolytic cells and products
Worked example
Dilute sulfuric acid is electrolysed between platinum electrodes with a current of for hour. Water is reduced to hydrogen at the cathode and oxidised to oxygen at the anode. Calculate the volume of each gas produced, measured at STP.
Step 1: Charge and electrons
; .
Step 2: Hydrogen at the cathode
: 2 electrons per , so and .
In acid the cathode reaction is written with ; either way it takes two electrons to make one .
Step 3: Oxygen at the anode
: 4 electrons per , so and .
Step 4: Check the ratio
The same electrons pass through both electrodes, so twice as much hydrogen as oxygen forms, matching .
Answer
of hydrogen and of oxygen at STP.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
, then .
Use each electrode's half-equation for its own mole ratio.
at STP.
Watch out for
Using the same mole ratio for both gases. Oxygen needs four electrons per molecule, hydrogen two.
Using (SLC) instead of at STP.