Lesson 6: Galvanic cells
A magnesium–iron galvanic cell
SkillsGalvanic cellsElectrode potentials and E°cell
Worked example
A galvanic cell is built from a magnesium strip in and an iron strip in , joined by a wire and a salt bridge of .
Identify the anode and cathode with their signs and half-equations, state the direction of electron flow and of ion movement in the salt bridge, write the cell diagram and calculate .
Step 1: Compare E° values
and . Iron's is higher, so is reduced: iron is the cathode.
The half-cell with the higher reduction potential wins the competition for electrons and runs as a reduction.
Step 2: Anode
Magnesium is the anode, the negative electrode: .
Step 3: Cathode
Iron is the cathode, the positive electrode: .
Step 4: Flows
Electrons flow through the wire from magnesium to iron. In the salt bridge, ions move towards the magnesium half-cell and ions towards the iron half-cell.
Step 5: Cell diagram
Step 6: Cell potential
Answer
Magnesium is the negative anode () and iron the positive cathode (). Electrons flow from Mg to Fe through the wire; moves to the Mg half-cell and to the Fe half-cell. , .
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Higher : cathode, reduction, positive. Lower : anode, oxidation, negative.
Electrons: anode to cathode through the wire. Anions to the anode, cations to the cathode in the salt bridge.
Cell diagram: anode on the left, salt bridge as ||.
.
Watch out for
Choosing the cathode as the half-cell with the "bigger number" ignoring signs: is lower than .
Drawing electrons through the salt bridge.