Lesson 2 of 9 · 18 min
Enzymes and the active site
Describe how an enzyme's active site binds its substrate and lowers the activation energy, compare the lock-and-key and induced-fit models, and explain how enzymes control metabolism.
What you will be able to do
- Describe enzymes as biological catalysts that lower activation energy and are not used up.
- Describe the active site and explain why enzymes are specific.
- Compare the lock-and-key and induced-fit models of enzyme function.
- Explain how metabolic pathways are controlled and regulated by enzymes, including feedback inhibition and inactive precursors.
Hydrogen peroxide is a toxic by-product of metabolism. On its own it breaks down into water and oxygen very slowly. Drop a piece of raw liver into it and it froths at once, because liver cells are packed with catalase, an enzyme that splits millions of hydrogen peroxide molecules every second:
Almost every reaction in a cell, from digesting starch to copying DNA, would run far too slowly at body temperature without an enzyme to catalyse it. Which enzymes a cell makes, and how active they are, decides which reactions happen there. That is what it means to say enzymes control metabolism.
Definition
Enzyme
An enzyme is a biological catalyst, usually a globular protein, that speeds up a specific reaction by lowering its activation energy. It is not changed or used up by the reaction, so one enzyme molecule catalyses the same reaction again and again.
Activation energy. Molecules must collide with enough energy to break bonds before they can react. That minimum energy is the activation energy. An enzyme gives the reaction a different pathway with a lower activation energy, so at body temperature far more collisions succeed. The enzyme does not change the energy of the reactants or products, so it does not change the overall energy released or absorbed.
An enzyme lowers the activation energy () of a reaction. The energy of the substrate and of the products is unchanged.
The active site. An enzyme is a long polypeptide folded into a precise three-dimensional shape (its tertiary structure). Somewhere on its surface is a small pocket or groove, the active site, formed by a few of its amino acids. The active site's shape and the charges of its R groups are complementary to one particular substrate.
When the substrate binds, the two form an enzyme–substrate complex. Inside it the substrate's bonds are strained or its atoms are held in just the right positions, so the reaction happens easily. The products no longer fit, so they are released, and the active site is free for the next substrate molecule.
Because only molecules with the complementary shape and charges fit, each enzyme is specific: amylase hydrolyses starch but not proteins, and protease hydrolyses proteins but not starch.
Substrate + enzyme → enzyme–substrate complex → products + enzyme. The enzyme comes out unchanged.
Step through binding, the enzyme–substrate complex and the release of the products. Then switch between the lock-and-key and induced-fit models and watch what happens to the active site.
Why does sucrase hydrolyse sucrose but not lactose, even though both are disaccharides?
Two models of how the substrate fits. In 1894 the German chemist Emil Fischer pictured the active site as a rigid shape that the substrate fits exactly, like a key in a lock: the lock-and-key model. In 1958 the American biochemist Daniel Koshland proposed the induced-fit model: the active site is flexible, and as the substrate binds, the active site changes shape slightly to mould tightly around it, the way a glove changes shape as a hand slides in. That tighter grip strains the substrate's bonds and lowers the activation energy.
Lock-and-key model
- The active site has a fixed, rigid shape.
- It is exactly complementary to the substrate before binding.
- Explains specificity: only the right "key" fits.
- Does not explain how binding lowers the activation energy, or why some enzymes act on a small group of similar substrates.
Induced-fit model
- The active site is flexible.
- Binding of the substrate induces a change in the active site's shape, so it fits more closely.
- Explains specificity and how the change in shape strains bonds, lowering the activation energy.
- Explains why some enzymes bind a few similar substrates, and how molecules binding elsewhere can change the active site. It is the model supported by evidence such as X-ray structures of enzymes with and without substrate bound.
Worked example
Compare the lock-and-key and induced-fit models
Compare the lock-and-key and induced-fit models of enzyme action. Give one similarity, two differences, and explain which observation the induced-fit model accounts for better.
Step 1: A similarity
In both models the substrate binds to the active site to form an enzyme–substrate complex, the reaction occurs, the products are released and the enzyme is unchanged. Both explain specificity: only a substrate with a complementary shape can bind.
Step 2: First difference
Lock-and-key: the active site is rigid and already exactly complementary to the substrate. Induced fit: the active site is flexible and changes shape as the substrate binds.
Step 3: Second difference
In the induced-fit model the change in shape strains the substrate's bonds, which explains how the enzyme lowers the activation energy. The lock-and-key model does not explain this.
Step 4: An observation induced fit explains better
Some enzymes act on a small group of similar substrates, and X-ray structures show that many enzymes change shape when the substrate binds. A rigid lock fits only one key and never changes, so only the induced-fit model accounts for these.
"Compare" wants both similarities and differences, written as a comparison ("whereas"), not two separate descriptions.
Try it yourself first, then check the working one step at a time.
Answer
Both: substrate binds to a complementary active site, forming an enzyme–substrate complex; explains specificity. Lock-and-key: rigid active site, exact fit before binding. Induced fit: flexible active site that moulds around the substrate, straining its bonds; it explains shape changes seen in enzyme structures and enzymes that act on several similar substrates.
Method
State what both models share.
Contrast rigid against flexible, and fit before against fit during binding.
Name the evidence only induced fit explains.
Watch out for
Saying the substrate changes shape to fit in the induced-fit model. The active site changes shape.
Describing each model separately without comparing them.
Common mistake
Complementary, not the same
"The substrate is the same shape as the active site" loses the mark. A key and its lock, or a hand and its glove, are complementary: they fit together because each is the reverse of the other. Also avoid "the enzyme fits the substrate": the substrate binds to the active site of the enzyme.
Cofactors. Many enzymes need a non-protein helper to work. Some need a metal ion, such as the zinc ion in carbonic anhydrase; others need an organic coenzyme, often made from a vitamin (several of the B vitamins become coenzymes in respiration). Without its cofactor the enzyme is inactive, which is one reason a vitamin deficiency causes disease.
Enzymes and metabolic control. Metabolism is organised into metabolic pathways: chains of reactions in which the product of one step is the substrate of the next, each step catalysed by its own enzyme.
Because each step needs its enzyme, the cell can control the whole pathway by controlling the enzymes. If one enzyme is missing, the pathway stops at that step, and the substrate before it builds up. Several metabolic diseases are exactly this (the last lesson of the topic).
| Method | How it works | Example |
|---|---|---|
| Which enzymes are made | Genes for an enzyme are switched on or off, so the cell makes more or less of it | Cells lining the small intestine make lactase; in many adults the gene is switched off after childhood |
| Inactive precursors | The enzyme is made in an inactive form and activated only where it is needed | Pepsinogen becomes pepsin only in the acid of the stomach, so it does not digest the cells that make it |
| Compartments | Enzymes are kept inside membranes, away from the rest of the cell | Digestive enzymes in lysosomes |
| Inhibitors and feedback inhibition | A molecule binds to the enzyme and slows it; the end product of a pathway can inhibit the first enzyme | Isoleucine inhibits the first enzyme of the pathway that makes it from threonine |
| Signals from nerves and hormones | The release of enzymes is switched on when they are needed | The sight and smell of food trigger saliva; the hormone cholecystokinin (CCK) triggers the pancreas to release its enzymes when food enters the small intestine |
| Conditions | Each enzyme works best at its own temperature and pH, which the body keeps steady | Body temperature near 37 °C; pH about 2 in the stomach and about 7–8 in the small intestine |
Key idea
Feedback inhibition
In feedback inhibition the end product of a pathway binds to an enzyme near the start of the pathway (usually at a site other than the active site) and changes its shape so it works more slowly. When plenty of product has built up, the pathway slows; when the product is used up, the inhibitor comes off and the pathway speeds up again. The cell makes just what it needs without wasting energy or raw materials. It is negative feedback, the same idea you will meet in homeostasis in Unit 2.
Worked example
Feedback inhibition in a metabolic pathway
Bacteria make the amino acid isoleucine from threonine in five steps, each catalysed by a different enzyme ( to ):
Isoleucine binds to at a site away from its active site. When the bacteria are grown with plenty of isoleucine in their medium, they stop making it.
(a) Identify the type of inhibition. (b) Explain how it lets the cell control the amount of isoleucine. (c) Suggest why it is , not , that is inhibited.
Step 1: Identify the type of inhibition
Isoleucine, the end product, inhibits the first enzyme of its own pathway: feedback (end-product) inhibition. It binds away from the active site, at an allosteric site, so it acts as a non-competitive inhibitor.
Step 2: Explain the control when isoleucine is high
When isoleucine builds up, more of it binds to , changing the shape of the active site so threonine binds less well. The first step slows, so less A, B, C and D are made, and isoleucine production falls.
Step 3: Explain the control when isoleucine is low
As isoleucine is used to make proteins, its concentration falls. Isoleucine leaves (the binding is reversible), the active site returns to its normal shape, and the pathway speeds up again.
This is negative feedback: a change in the product causes a response that reverses the change.
Step 4: Explain why the first enzyme is the target
Inhibiting stops the whole pathway at its start, so no energy or threonine is wasted making intermediates A to D that would only build up. Inhibiting would let D accumulate.
Try it yourself first, then check the working one step at a time.
Answer
(a) Feedback inhibition; non-competitive (allosteric). (b) High isoleucine binds and changes its active site, slowing the pathway; low isoleucine leaves and the pathway speeds up, so production matches need. (c) Stopping the first step wastes no threonine or energy on intermediates, which would otherwise build up.
Method
Find the end product and the enzyme it binds.
Explain both directions: product high → pathway slows; product low → pathway speeds up.
Explain efficiency: stopping the first step avoids wasted intermediates.
Watch out for
Calling it competitive. The inhibitor is not the substrate's shape and binds away from the active site.
Saying the enzyme is destroyed. Feedback inhibition is reversible.
The pancreas makes the protein-digesting enzyme trypsin as inactive trypsinogen, which is only activated once it reaches the small intestine. What is the main advantage of this?
Summary
An enzyme is a biological catalyst, usually a globular protein, that lowers activation energy and is not used up.
The active site is a pocket in the enzyme's tertiary structure whose shape and charges are complementary to one substrate, so enzymes are specific.
Substrate + enzyme → enzyme–substrate complex → products + enzyme. The products are released and the enzyme is reused.
Lock-and-key: a rigid, exactly complementary active site. Induced fit: a flexible active site that moulds around the substrate as it binds, straining bonds. Induced fit explains more of the evidence.
Many enzymes need cofactors: metal ions or coenzymes made from vitamins.
Each step of a metabolic pathway has its own enzyme, so controlling enzymes (how much is made, inactive precursors, compartments, inhibitors, feedback inhibition, nerve and hormone signals) controls metabolism.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.