Lesson 4: Investigating enzyme activity
Analyse an amylase and pH investigation
SkillsAnalysing enzyme experimentsFactors affecting enzyme activity
Worked example
Amylase and starch were mixed in buffers of different pH at . Drops were tested with iodine every , and the time for the iodine to stop turning blue-black was recorded.
| pH | Trial 1 (s) | Trial 2 (s) | Trial 3 (s) |
|---|---|---|---|
| 4 | 300 | 290 | 310 |
| 5 | 150 | 160 | 145 |
| 6 | 90 | 85 | 95 |
| 7 | 60 | 65 | 55 |
| 8 | 75 | 120 | 80 |
| 9 | 200 | 210 | 190 |
(a) Identify the outlier. (b) Calculate the mean time and the rate () at pH 7 and pH 8. (c) State the uncertainty of the mean at pH 7. (d) State the optimum pH and suggest how to find it more precisely. (e) Identify two controlled variables.
Step 1: Identify the outlier
At pH 8, is far from the other two trials ( and ). Leave it out.
Step 2: Mean and rate at pH 7
;
Step 3: Mean and rate at pH 8
;
A longer time is a slower rate, so the rate at pH 8 must come out smaller than at pH 7. It does.
Step 4: Uncertainty at pH 7
, so the mean is .
Step 5: Optimum and a better estimate
The shortest time (fastest rate) is at pH 7, so the optimum is about pH 7, and lies between pH 6 and 8. To find it more precisely, repeat with smaller intervals, such as pH 6.0, 6.5, 7.0, 7.5 and 8.0.
Step 6: Controlled variables
Any two of: temperature ( water bath), the concentration and volume of amylase, the concentration and volume of starch, the volume of buffer, the interval between iodine tests.
Answer
(a) 120 s at pH 8. (b) pH 7: 60 s, 0.017 s⁻¹; pH 8: 77.5 s, 0.013 s⁻¹. (c) ±5 s. (d) About pH 7 (between 6 and 8); test at smaller pH intervals around 7. (e) For example temperature and the concentration of amylase.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Spot and exclude outliers before averaging.
Rate = 1 ÷ mean time; check that longer times give smaller rates.
Uncertainty = ± half the range of the trials used.
The optimum is the tested value with the fastest rate; refine with smaller intervals.
Watch out for
Including the outlier, which gives a mean of 91.7 s at pH 8.
Taking the longest time as the fastest rate.