Lesson 3 of 10 · 18 min

Microscopy, magnification and field of view

Use a light microscope, calculate total magnification and field of view, estimate the size of cells, and find actual sizes from images and scale bars.

What you will be able to do

  • Name the parts of a light microscope and use it correctly, from low to high power.
  • Calculate total magnification and the field of view at a new magnification.
  • Estimate the size of a cell from the field of view, and calculate actual size or magnification from an image or a scale bar.
  • Compare light and electron microscopes.

A human cheek cell is about 50–60 µm across, a twentieth of a millimetre. Your eye can just separate two dots about 0.1 mm apart, so a cheek cell is invisible without help. A light microscope uses two lenses to make the image large enough to see, and with a few simple calculations you can work out how big the cell really is.

A compound light microscope. Light passes up through the condenser, the specimen, the objective lens and the eyepiece.

Parts of a compound light microscope
PartWhat it does
Eyepiece (ocular) lensThe lens you look through; usually ×10\times 10
Objective lensesThree or four lenses on a revolving nosepiece, usually ×4\times 4, ×10\times 10 and ×40\times 40 (sometimes ×100\times 100 oil immersion)
Stage and stage clipsHold the slide over the hole that light passes through
Coarse focus knobMoves the stage (or tube) a long way; use only with the low-power objective
Fine focus knobSmall movements to sharpen the image; the only focus to use at high power
Light source (or mirror)Shines light up through the specimen
Condenser and diaphragmFocus the light onto the specimen and control how much passes through, which changes brightness and contrast
Arm and baseCarry the microscope by the arm with a hand under the base

Viewing a specimen

  1. Start on the lowest-power objective

    Click the ×4\times 4 objective into place and put the slide on the stage with the specimen over the hole.

  2. Focus with the coarse knob, watching from the side

    Bring the stage close to the lens while you watch from the side, then look through the eyepiece and move them apart until the image is in focus. You can never crush the slide this way.

  3. Centre what you want to see

    Move the slide so the cells you want are in the middle. The image is upside down and back to front, so move the slide the opposite way to the way you want the image to go.

  4. Change to higher power and use only the fine focus

    Click in the next objective. The image should still be nearly in focus; sharpen it with the fine knob. Adjust the diaphragm, because a higher-power image is darker.

Key idea

Total magnification

total magnification=eyepiece magnification×objective magnification\text{total magnification} = \text{eyepiece magnification} \times \text{objective magnification}

A ×10\times 10 eyepiece with the ×40\times 40 objective gives 10×40=×40010 \times 40 = \times 400. Magnification has no unit. Write it with a times sign: ×400\times 400.

Interactive

Change the lenses

Change the eyepiece and objective. What happens to the field of view each time the magnification goes up?

A microscope has a ×15\times 15 eyepiece. Calculate the total magnification with the ×10\times 10 objective.

Field of view. The circle of light you see is the field of view (FOV), described by its diameter. Measure it once, at low power, by focusing on a clear plastic ruler: at ×40\times 40 a typical field is about 4.5 mm across.

You can't see a ruler's millimetre marks at high power, so you calculate the field instead. When the magnification goes up, you see a proportionally smaller area. Four times the magnification shows a quarter of the diameter:

FOVnew=FOVold×magnificationoldmagnificationnew\text{FOV}_{\text{new}} = \text{FOV}_{\text{old}} \times \frac{\text{magnification}_{\text{old}}}{\text{magnification}_{\text{new}}}
Field of view of a microscope with a ×10\times 10 eyepiece
ObjectiveTotal magnificationField of view diameter
×4\times 4×40\times 404.5 mm = 4500 µm (measured)
×10\times 10×100\times 1004500×40100=18004500 \times \frac{40}{100} = 1800 µm
×40\times 40×400\times 4004500×40400=4504500 \times \frac{40}{400} = 450 µm

At ×100\times 100 the field of view of a microscope is 2.0 mm across. Calculate the field of view diameter at ×400\times 400, in micrometres.

in mum

Estimating cell size. Count how many cells fit across the diameter of the field, then divide:

size of one cell≈field of view diameternumber of cells across the diameter\text{size of one cell} \approx \frac{\text{field of view diameter}}{\text{number of cells across the diameter}}

If 9 cheek cells span a 450 µm field at ×400\times 400, each cell is about 450÷9=50450 \div 9 = 50 µm across. It is an estimate, because cells vary and rarely line up neatly, so count along two or three diameters and average.

Interactive

Measure the field and estimate a cell

Scale the field you measured at low power, then count the cells along the diameter.

Worked example

Estimate the size of a cheek cell from the field of view

  • Complex familiar
  • Technology active

A student uses a microscope with a ×10\times 10 eyepiece and objectives of ×4\times 4, ×10\times 10 and ×40\times 40. With the ×4\times 4 objective, a clear ruler shows that the field of view is 4.5 mm across. On the highest power, about 8 cheek cells fit across the diameter of the field.

(a) Calculate the total magnification on the highest power. (b) Calculate the field of view diameter on the highest power, in micrometres. (c) Estimate the diameter of one cheek cell.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Total magnification = eyepiece × objective.

  2. Convert the measured field to µm, then scale it: FOV_new = FOV_old × (old ÷ new magnification).

  3. Cell size ≈ FOV ÷ number of cells across, to a sensible number of significant figures.

Watch out for

  • Multiplying by 40040\frac{400}{40}, which makes the field bigger at higher power.

  • Dividing 4.5 mm by 8 without scaling the field to the high-power magnification first.

Image size, actual size and magnification. A drawing, photograph or micrograph shows an image larger than the real object by its magnification:

magnification=image sizeactual sizeactual size=image sizemagnification\text{magnification} = \frac{\text{image size}}{\text{actual size}} \qquad \text{actual size} = \frac{\text{image size}}{\text{magnification}}

Measure the image with a ruler in millimetres, then convert to the unit you want before dividing (1 mm = 1000 µm, 1 µm = 1000 nm). A micrograph often carries a scale bar instead of a magnification: a line labelled with the actual length it represents. Measure the bar and use it in the same formula.

In an electron micrograph at ×12 000\times 12\,000, a mitochondrion is 30 mm long. Calculate its actual length in micrometres.

in mum

Worked example

Use a scale bar to find magnification and actual size

  • Complex familiar
  • Technology active

An electron micrograph of a white blood cell carries a scale bar labelled 10 µm. On the printed image the scale bar is 25 mm long and the cell is 30 mm across.

(a) Calculate the magnification of the micrograph. (b) Calculate the actual diameter of the cell.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Convert the measured lengths to the unit of the scale bar (usually µm).

  2. Magnification = image length of bar ÷ length the bar represents.

  3. Actual size = image size ÷ magnification, or (image of object ÷ image of bar) × bar length.

Watch out for

  • Dividing 25 mm by 10 µm without converting, which gives ×2.5\times 2.5.

Interactive

Measure a micrograph

Drag the ruler across the image, convert to micrometres, and divide by the magnification. Then try the scale bar problem.

Common mistake

Convert first, then divide

The commonest slip is dividing millimetres by micrometres. Put image size and actual size in the same unit before you calculate. A quick reasonableness check helps: animal cells are tens of micrometres, bacteria and mitochondria a few micrometres, ribosomes about 20–30 nm.

Light microscope

  • Uses light focused by glass lenses.
  • Useful magnification up to about ×1500\times 1500.
  • Resolution about 0.2 µm: cells, nuclei and chloroplasts are visible, but not ribosomes or the detail of most organelles.
  • Can view living cells and their movement.
  • Shows colour; stains (iodine, methylene blue) pick out structures.
  • Cheap, portable, quick to prepare slides.

Electron microscope

  • Uses a beam of electrons focused by magnets.
  • Magnification of ×100 000\times 100\,000 or more.
  • Resolution below 1 nm: organelle membranes, ribosomes and large molecules are visible.
  • Specimens must be dead, because they are placed in a vacuum.
  • Images are black and white (colour is added afterwards: "false colour").
  • Expensive, and preparation can create artefacts.

A transmission electron microscope (TEM) fires electrons through a very thin slice and shows internal structure, which is why organelles are identified from TEMs. A scanning electron microscope (SEM) bounces electrons off a coated surface and gives a three-dimensional view of the outside of cells, such as the microvilli of intestinal cells or the surface of pollen.

A student wants to observe the cristae inside the mitochondria of a liver cell. Which instrument should they use, and why?

Choose one answer

Summary

  • Total magnification = eyepiece × objective, written as ×400 with no unit.

  • Measure the field of view at low power; it shrinks in proportion as magnification rises: FOV_new = FOV_old × (old magnification ÷ new magnification).

  • Cell size ≈ field of view diameter ÷ number of cells across it.

  • Actual size = image size ÷ magnification, with both sizes in the same unit (1 mm = 1000 µm); a scale bar gives the same information.

  • Light microscopes resolve about 0.2 µm and can show living cells; electron microscopes resolve below 1 nm but need dead specimens in a vacuum.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 100% read

Save your progress with a free account