Specialist Mathematics · Unit 2 · Topic 1

Complex numbers

Meet i and the complex numbers a + bi, add, subtract, multiply and divide them by hand and with technology, and picture them on the Argand plane, where addition is vector addition, conjugates are reflections and multiplication rotates and dilates.

  • 8 lessons
  • 1 h 59 min of lessons
  • 14 worked examples
  • 10 hours in the syllabus
0 of 8

Start here

Meet ii: a number whose square is −1-1

Lesson 1 of 8 · 14 min

Start the topic

Lessons

8
  1. Meet ii: a number whose square is −1-1 (up next)

    Define ii as a solution of x2=−1x^2 = -1, write square roots of negative numbers using ii, solve equations such as x2=−9x^2 = -9, and simplify any power of ii.

  2. Complex numbers, their parts and the set ℂ

    Write complex numbers in the form a + bi, state their real and imaginary parts, place ℂ among the number sets, and find unknowns by equating real and imaginary parts.

  3. The Argand plane: complex numbers as points

    Plot complex numbers as points with the real part across and the imaginary part up, read complex numbers off an Argand diagram, and say where real and purely imaginary numbers lie.

  4. Adding and subtracting, as algebra and as vectors

    Add and subtract complex numbers by combining real and imaginary parts, and see the same operations as vector addition, vectors between points and translations on the Argand plane.

  5. Multiplying complex numbers

    Multiply complex numbers by expanding and replacing i2i^2 with −1-1, find squares and higher powers, check whether a complex number solves an equation, and use a graphics calculator for complex arithmetic.

  6. Complex conjugates and where they sit

    Find the conjugate of a complex number, use z+zˉz + \bar{z}, z−zˉz - \bar{z} and zzˉz\bar{z}, see the conjugate as a reflection in the real axis, and solve equations that involve zˉ\bar{z}.

  7. Dividing complex numbers

    Divide complex numbers by multiplying the numerator and denominator by the conjugate of the denominator, write the result as a+bia + bi, solve equations such as (2−i)z=7+4i(2 - i)z = 7 + 4i, and check with technology.

  8. Multiplication as a transformation of the plane

    See multiplication by a real number as a dilation, by ii as a quarter-turn, and by a+bia + bi as a rotation combined with a dilation about the origin, a linear transformation with its own 2 × 2 matrix.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

No real number squares to −1-1, so x2=−1x^2 = -1 has no real solutions. Complex numbers fix that by adding one new number, ii, with i2=−1i^2 = -1. Every complex number can then be written as a+bia + bi with aa and bb real, and all the usual rules of algebra still work.

In this topic you'll learn to calculate with complex numbers by hand and with a graphics calculator, and to draw them as points in the complex (Argand) plane. There every operation has a picture: adding is vector addition, the conjugate is a reflection in the real axis, and multiplying is a rotation combined with a dilation. These ideas lead straight into the next topic (modulus, argument, polar form and complex solutions of quadratics) and on to Unit 3.

Before you start

Builds on Introduction to proof, Vectors in the plane, Algebra of vectors in two dimensions and Matrices.

  • Expanding and simplifying products of brackets, including (a+b)2(a + b)^2 and (a+b)(a−b)(a + b)(a - b).
  • Rationalising a surd denominator, e.g. 12+3=2−3\dfrac{1}{2 + \sqrt{3}} = 2 - \sqrt{3}.
  • Set notation for the number systems Z+\mathbb{Z}^+, Z\mathbb{Z}, Q\mathbb{Q}, Q′\mathbb{Q}^{\prime} and R\mathbb{R}, and the symbol ∈\in (Unit 1).
  • Vectors in the plane as ordered pairs, with the triangle and parallelogram rules for adding them (Unit 1).
  • Multiplying a 2×22 \times 2 matrix by a column vector (Unit 1).

What QCAA says you need to know9 dot points

Introduction to complex numbers

4 hours

The complex plane (the Argand plane)

6 hours

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Working with i

    Use i² = −1 to simplify square roots of negative numbers and powers of i, and solve equations like x² = −9.

    Practise
  • Complex numbers and number sets

    Use ℂ and the chain ℤ⁺ ⊂ ℤ ⊂ ℚ ⊂ ℝ ⊂ ℂ to classify numbers as real, purely imaginary or neither.

    Practise
  • Real and imaginary parts

    State Re(z) and Im(z), and equate real and imaginary parts to find unknown real numbers.

    Practise
  • Adding, subtracting and multiplying

    Add, subtract and multiply complex numbers, including squares and powers, by hand and with technology.

    Practise
  • Complex conjugates

    Find the conjugate, use z + z̄, z − z̄ and z z̄, and solve equations that involve z̄.

    Practise
  • Dividing complex numbers

    Divide by multiplying the numerator and denominator by the conjugate of the denominator, and solve equations such as wz = u.

    Practise
  • Plotting on the Argand plane

    Plot and read complex numbers as points, and decide which quadrant or axis a complex number lies on.

    Practise
  • Addition as vectors

    Add and subtract complex numbers as vectors to find sums, vectors between points, midpoints, translations and vertices of shapes.

    Practise
  • Conjugates as reflections

    Locate z̄, −z and −z̄ as reflections of z in the axes and a half-turn about the origin.

    Practise
  • Multiplication as a transformation

    Describe z ↦ wz as a rotation and dilation about the origin, find images of points and shapes, and write its matrix.

    Practise

Worked examples14

All 14

Common mistakes

Putting the i in the imaginary part

Im⁡(3−4i)=−4\operatorname{Im}(3 - 4i) = -4, not −4i-4i. Both parts of a complex number are real numbers, and coordinates on an Argand diagram are real too: 3−4i3 - 4i is the point (3,−4)(3, -4).

Multiplying square roots of negative numbers directly

−4 −9≠36\sqrt{-4}\,\sqrt{-9} \ne \sqrt{36}. The rule ab=ab\sqrt{a}\sqrt{b} = \sqrt{ab} fails when aa and bb are both negative. Convert first: 2i×3i=6i2=−62i \times 3i = 6i^2 = -6.

Forgetting that i2=−1i^2 = -1

In (2+3i)(4−i)(2 + 3i)(4 - i) the last term is −3i2=+3-3i^2 = +3. Treating i2i^2 as +1+1, or leaving i2i^2 in the answer, loses the mark.

Squaring each part separately

(a+bi)2≠a2+b2i2(a + bi)^2 \ne a^2 + b^2 i^2. The middle term 2abi2abi is essential: (3−i)2=9−6i+i2=8−6i(3 - i)^2 = 9 - 6i + i^2 = 8 - 6i.

Changing the wrong sign in a conjugate

−3+5i‾=−3−5i\overline{-3 + 5i} = -3 - 5i. Only the imaginary part changes sign; 3−5i3 - 5i is −z-z, a different point.

Multiplying only the denominator by the conjugate

To divide, multiply the numerator and the denominator by the conjugate of the denominator. Multiplying the bottom alone changes the value.

Getting the vector between two points backwards

The vector from zz to ww is w−zw - z (end minus start). z−wz - w points the opposite way.

Rotating about the wrong point

z↦izz \mapsto iz rotates about the origin, not about the point itself or the centre of a shape. To rotate about pp, use z↦i(z−p)+pz \mapsto i(z - p) + p.

Equating parts when the unknowns might not be real

You can equate real and imaginary parts only when the unknowns are real. If an equation involves zz itself, write z=x+yiz = x + yi with x,y∈Rx, y \in \mathbb{R} first.

Exam tips

  1. Paper 1 is technology-free, so practise expanding, conjugate multiplication and powers of ii by hand until they are quick. Show the line where i2i^2 becomes −1-1.

  2. Unless the question says otherwise, give answers in Cartesian form a+bia + bi with exact values: fractions such as 713+1713i\frac{7}{13} + \frac{17}{13}i and surds such as 25 i2\sqrt{5}\,i.

  3. "Show that" questions give you the answer, so every step earns the marks: substitute, expand, replace i2i^2 with −1-1, collect real and imaginary parts, and finish with a statement.

  4. When you equate real and imaginary parts, say so: "Equating real parts: … Equating imaginary parts: …". Markers look for both equations.

  5. In Paper 2, a graphics calculator in complex (a+bia + bi) mode does the arithmetic. Write down the expression you entered as well as the result, and convert decimals to exact fractions where you can.

  6. On an Argand diagram, label the axes Re and Im, mark a scale, and label each point with its complex number or letter.

  7. To describe a transformation, give every feature: its type, the centre (usually the origin), the angle and direction of a rotation, and the factor of a dilation.

  8. Check answers: substitute back into the equation, multiply a quotient by the divisor to recover the numerator, or sketch the points to see if a vertex or midpoint looks right.

Where this shows up

  • Electrical engineering: alternating-current circuits are analysed with complex impedances (engineers write jj for ii). Resistance is the real part; inductors and capacitors contribute the imaginary part.

  • Computer graphics and games: multiplying by a complex number rotates and scales a 2D position in a single step.

  • Signal processing: audio, radio and Wi-Fi signals are handled as complex numbers, which carry a signal's size and timing together.

  • Fractals: the Mandelbrot set is drawn by repeating z↦z2+cz \mapsto z^2 + c for each complex number cc and watching whether the values stay bounded.

  • Quantum physics: the state of a particle is described by a wave function whose values are complex numbers.

  • Fluid flow and aerodynamics: engineers use complex numbers to model the flow of air around shapes such as aircraft wings.

Save your progress with a free account