Lesson 6 of 8 · 16 min

The inverse of a 2 × 2 matrix

Find the inverse of a 2 × 2 matrix with the formula, check it by multiplying, and explain why a singular matrix has no inverse.

What you will be able to do

  • Define the multiplicative inverse: AA−1=I=A−1A\bm{AA}^{-1} = \bm{I} = \bm{A}^{-1}\bm{A}.
  • Find A−1\bm{A}^{-1} for a 2×22 \times 2 matrix with the formula, with and without technology.
  • Check an inverse by multiplying, and explain why there is none when det⁡(A)=0\det(\bm{A}) = 0.

To undo "multiply by 5" you multiply by 15\frac{1}{5}, because 5×15=15 \times \frac{1}{5} = 1. For matrices the identity I\bm{I} plays the part of 1, so the matrix that undoes A\bm{A} is the one that multiplies with it to give I\bm{I}.

There is no such thing as dividing by a matrix. You multiply by its inverse instead, which is why the inverse is the key to solving matrix equations.

Definition

The multiplicative inverse

The inverse of a square matrix A\bm{A} is the matrix A−1\bm{A}^{-1} for which

AA−1=I=A−1A\bm{AA}^{-1} = \bm{I} = \bm{A}^{-1}\bm{A}

It exists only when det⁡(A)≠0\det(\bm{A}) \neq 0. Note that A−1\bm{A}^{-1} is not 1A\frac{1}{\bm{A}}, and it is not the matrix of the reciprocals of the elements.

The inverse of a 2 × 2 matrix (on the formula sheet)
A=[abcd]  ⟹  A−1=1det⁡(A)[d−b−ca]=1ad−bc[d−b−ca],det⁡(A)≠0\bm{A} = \begin{bmatrix} a & b \\ c & d \end{bmatrix} \implies \bm{A}^{-1} = \frac{1}{\det(\bm{A})}\begin{bmatrix} d & -b \\ -c & a \end{bmatrix} = \frac{1}{ad - bc}\begin{bmatrix} d & -b \\ -c & a \end{bmatrix}, \quad \det(\bm{A}) \neq 0

Finding the inverse of a 2 × 2 matrix

  1. Find the determinant

    Calculate det⁡(A)=ad−bc\det(\bm{A}) = ad - bc. If it is 00, stop: the matrix is singular and has no inverse.

  2. Swap the leading diagonal

    Swap aa and dd.

  3. Change the signs of the other diagonal

    Replace bb and cc with −b-b and −c-c, leaving them where they are.

  4. Divide by the determinant

    Multiply the new matrix by 1det⁡(A)\frac{1}{\det(\bm{A})}. You can leave the fraction outside the matrix or multiply it in.

  5. Check

    Multiply: AA−1\bm{AA}^{-1} should be I\bm{I}.

Interactive

Inverse explorer

Here det⁡(A)=24−14=10\det(\bm{A}) = 24 - 14 = 10, so A−1=110[6−7−24]\bm{A}^{-1} = \frac{1}{10}\begin{bmatrix} 6 & -7 \\ -2 & 4 \end{bmatrix}. Change the entries and watch the inverse change. What happens to its entries as the determinant gets close to 00?

Worked example

Find and check the inverse of a 2 × 2 matrix

  • Simple familiar
  • Technology free

Find A−1\bm{A}^{-1} for A=[3−42−2]\bm{A} = \begin{bmatrix} 3 & -4 \\ 2 & -2 \end{bmatrix}, and verify your answer.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find det⁡(A)\det(\bm{A}) and check it is not zero.

  2. Swap the leading diagonal, negate the other diagonal.

  3. Multiply by 1det⁡(A)\frac{1}{\det(\bm{A})}, then check that AA−1=I\bm{AA}^{-1} = \bm{I}.

Watch out for

  • Losing the sign of b=−4b = -4: det⁡(A)=−6−8=−14\det(\bm{A}) = -6 - 8 = -14 is wrong.

  • Negating the leading diagonal instead of the other one.

Find the inverse of [5273]\begin{bmatrix} 5 & 2 \\ 7 & 3 \end{bmatrix}.

Where the formula comes from, and why a singular matrix has no inverse

Multiply A\bm{A} by the "swapped and negated" matrix:

[abcd][d−b−ca]=[ad−bc−ab+bacd−dc−cb+da]=(ad−bc)I\begin{bmatrix} a & b \\ c & d \end{bmatrix}\begin{bmatrix} d & -b \\ -c & a \end{bmatrix} = \begin{bmatrix} ad - bc & -ab + ba \\ cd - dc & -cb + da \end{bmatrix} = (ad - bc)\bm{I}

If ad−bc≠0ad - bc \neq 0, divide by it, and you have a matrix that multiplies A\bm{A} to give I\bm{I}. Multiplying in the other order also gives (ad−bc)I(ad - bc)\bm{I}, so the formula works on both sides.

If ad−bc=0ad - bc = 0, the product above is 0\bm{0}. Suppose A−1\bm{A}^{-1} existed anyway. Pre-multiplying both sides by A−1\bm{A}^{-1} would give [d−b−ca]=0\begin{bmatrix} d & -b \\ -c & a \end{bmatrix} = \bm{0}, so a=b=c=d=0a = b = c = d = 0 and A=0\bm{A} = \bm{0}. But 0X=0≠I\bm{0X} = \bm{0} \neq \bm{I} for every matrix X\bm{X}, so 0\bm{0} has no inverse. That contradiction shows a singular matrix has no inverse.

Common mistake

Swap one diagonal, negate the other

The usual slips are swapping bb and cc instead of negating them, negating aa and dd, forgetting to divide by the determinant, and dividing by bc−adbc - ad. Build the habit of checking one entry of AA−1\bm{AA}^{-1}: if the top-left entry isn't 11, something has gone wrong.

Which matrix is the inverse of [2153]\begin{bmatrix} 2 & 1 \\ 5 & 3 \end{bmatrix}?

Choose one answer

Without technology

Use the formula and keep the answer exact. Either leave 1det⁡(A)\frac{1}{\det(\bm{A})} outside the matrix, or multiply it in and write fractions such as −32-\frac{3}{2}, never rounded decimals.

With technology

Enter A\bm{A} in the matrix editor and raise it to the power −1-1 with the x−1x^{-1} key. Most calculators can show the entries as fractions. If A\bm{A} is singular, you get an error message instead of an inverse.

Find the inverse of [4612]\begin{bmatrix} 4 & 6 \\ 1 & 2 \end{bmatrix}. Give exact values.

Worked example

Use a matrix identity to find an inverse

  • Complex unfamiliar
  • Technology free

Let A=[2112]\bm{A} = \begin{bmatrix} 2 & 1 \\ 1 & 2 \end{bmatrix}.

(a) Show that A2−4A+3I=0\bm{A}^2 - 4\bm{A} + 3\bm{I} = \bm{0}.

(b) Hence express A−1\bm{A}^{-1} in terms of A\bm{A} and I\bm{I}, and use your expression to find A−1\bm{A}^{-1}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Move the multiple of I\bm{I} to one side and every term containing A\bm{A} to the other.

  2. Factorise A\bm{A} out on the left, writing kAk\bm{A} as kAIk\bm{AI}.

  3. Divide by the scalar to get A×(… )=I\bm{A} \times (\dots) = \bm{I}. The bracket is A−1\bm{A}^{-1}.

Watch out for

  • Factorising A2−4A\bm{A}^2 - 4\bm{A} as A(A−4)\bm{A}(\bm{A} - 4): you cannot subtract a number from a matrix.

Summary

  • A−1\bm{A}^{-1} is the matrix with AA−1=I=A−1A\bm{AA}^{-1} = \bm{I} = \bm{A}^{-1}\bm{A}. There is no matrix division.

  • A−1=1ad−bc[d−b−ca]\bm{A}^{-1} = \frac{1}{ad - bc}\begin{bmatrix} d & -b \\ -c & a \end{bmatrix}: swap the leading diagonal, negate the other diagonal, divide by the determinant.

  • If det⁡(A)=0\det(\bm{A}) = 0, A\bm{A} is singular and has no inverse.

  • Always check that AA−1=I\bm{AA}^{-1} = \bm{I}.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 80% read

Save your progress with a free account