Lesson 7: Standing sound waves in pipes
Speed of sound from a resonance tube
SkillsAnalysing wave experimentsStanding waves in strings and pipes
Worked example
In a resonance-tube experiment at 25 °C, a tuning fork is held over the open end of a tube closed at the bottom by water. The first resonance occurs when the air column is long, and the second when it is long. Each length is measured to .
(a) Determine the wavelength of the sound.
(b) Calculate the speed of sound, with its absolute uncertainty. Treat the fork's frequency as exact.
(c) Estimate the end correction.
(d) Compare your result with the data book value.
Step 1: Use the difference between resonances
Successive resonances are half a wavelength apart: . So and .
Both lengths are short of the true antinode by the same end correction, so subtracting them cancels it.
Step 2: Calculate the speed of sound
Step 3: Propagate the uncertainty
Subtracting adds absolute uncertainties: , so . Multiplying by an exact frequency keeps the percentage uncertainty: , and of is about . So .
Step 4: Estimate the end correction
The first resonance should be a quarter-wavelength: . The measured column is , so the antinode sits about above the top of the tube.
Step 5: Compare with the accepted value
The data book gives at 25 °C, well inside the range to . The percentage error is : excellent agreement.
Answer
(a) (b) (c) about (d) The data book value, , lies within the uncertainty: the result agrees.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
First resonance () and second resonance (). The curves show the amplitude of the air's vibration.
Method
removes the end correction.
.
Add absolute uncertainties for a difference; percentage uncertainties for a product.
End correction .
Watch out for
Using , which includes the end-correction error and gives .
Forgetting that the uncertainty of a difference is the sum of the two uncertainties.