Lesson 10: Conservation of momentum in collisions and explosions
Was the driver speeding? A crash reconstruction
SkillsConservation of momentumConstant acceleration equations
Worked example
A 1400 kg car runs into the back of a 1000 kg car that is stationary at traffic lights. The cars lock together and skid 12 m in a straight line before stopping. Investigators estimate that the locked cars decelerated at while skidding. The speed limit is 60 km/h. Determine whether the moving car was exceeding the speed limit just before the collision, stating your assumptions.
Step 1: Plan backwards from the skid
The skid gives the speed just after the collision. Conservation of momentum then gives the speed just before it.
Step 2: Speed of the locked cars after the collision
During the skid , , . , so .
Step 3: Conservation of momentum across the collision
, so .
The collision lasts a fraction of a second, so the impulse from road friction during it is tiny compared with the impulses the cars exert on each other. The two cars are close to an isolated system.
Step 4: Convert and compare
, which is about 14 km/h over the 60 km/h limit.
Step 5: State the assumptions
The deceleration was constant at throughout the skid, the cars moved off together in a straight line, and external forces during the impact were negligible. Even with a generous uncertainty in the deceleration, the estimate stays well above 60 km/h.
Answer
The car was travelling at about (74 km/h) before the collision, so it was exceeding the 60 km/h limit.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Work backwards from what was measured after the collision.
Use the equations of motion for the skid.
Use conservation of momentum across the collision.
Convert to the units of the claim and state the assumptions.
Watch out for
Using kinetic energy conservation across the collision. It is perfectly inelastic, so kinetic energy is not conserved.
Comparing m/s with km/h without converting.