Lesson 7: Investigating radiation and decay data
Find a half-life from experimental data
SkillsDecay graphs and radiation experimentsHalf-life calculations
Worked example
A student records the count rate from a radioactive sample every 10 minutes. The background count rate is 20 counts per minute.
Measured count rates (counts per minute) at min: 500, 347, 242, 171, 123, 90, 68.
The corrected values are plotted below. Determine the half-life of the sample.
Step 1: Correct for background
Subtract 20 from each reading: 480, 327, 222, 151, 103, 70, 48 counts per minute.
Step 2: Draw a smooth curve of best fit
The points scatter slightly because decay is random, so draw a smooth curve, not straight segments between points.
Step 3: Read the first halving
The corrected count rate falls from 480 to 240 at min.
Step 4: Read a second halving
It falls from 240 to 120 between 18 min and min: another 18 min.
Step 5: Average
Both readings give 18 min.
Answer
The half-life is about 18 minutes.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Corrected count rate against time, with a curve of best fit and two half-life readings.
Method
Subtract background from every reading.
Draw a smooth curve of best fit.
Read the time for the curve to halve, at least twice, and average.
Watch out for
Halving the uncorrected values: 500 to 250 happens at about 19 min, giving a half-life that is too long.
Reading from individual points instead of the curve of best fit.