Lesson 7 of 8 · 20 min

Displacement from velocity and acceleration

Integrate velocity to find displacement, and integrate acceleration twice to find velocity and displacement, using the initial values to fix each constant.

What you will be able to do

  • Use x(t)=∫v(t) dtx(t) = \int v(t)\,dt and v(t)=∫a(t) dtv(t) = \int a(t)\,dt.
  • Determine displacement from velocity and the initial displacement.
  • Determine velocity and displacement from acceleration and the initial velocity and displacement.
  • Interpret motion language: initially, at rest, at the origin, and the signs of displacement and velocity.

In Unit 2 and in Topic 3 you went down a chain by differentiating: displacement gives velocity, and velocity gives acceleration. Real measurements often arrive at the bottom of that chain. A phone's accelerometer measures acceleration; a speedometer measures speed. To find out where something is, you integrate your way back up.

Differentiate to go down the chain; integrate to come back up, using an initial value each time.

Interactive

Three linked graphs

Here x(t)=t3−6t2+9t+1x(t) = t^3 - 6t^2 + 9t + 1. Scrub through time: the particle starts 1 m to the right of OO, moves right until t=1t = 1, back to the left until t=3t = 3, then right again. Each graph is the gradient of the one above it. Read upwards, each graph is an antiderivative of the one below, lifted or lowered to match its starting value.

Key idea

Integrating back up the chain

Velocity is the rate of change of displacement, and acceleration is the rate of change of velocity:

v(t)=dxdt,a(t)=dvdtv(t) = \frac{dx}{dt}, \qquad a(t) = \frac{dv}{dt}

So, going back up the chain,

x(t)=∫v(t) dt,v(t)=∫a(t) dtx(t) = \int v(t)\,dt, \qquad v(t) = \int a(t)\,dt

Each integration brings a constant. The initial displacement x(0)x(0) fixes the constant in x(t)x(t), and the initial velocity v(0)v(0) fixes the constant in v(t)v(t).

Definition

Reading motion questions

  • Displacement x(t)x(t) is the particle's signed position relative to the origin OO. Right (or up) is usually positive.
  • Velocity v(t)v(t) is signed too: its sign gives the direction of motion. Speed is ∣v(t)∣|v(t)|.
  • Initially means t=0t = 0. At rest means v=0v = 0. At the origin means x=0x = 0.

Worked example

Displacement from a polynomial velocity

  • Simple familiar
  • Technology free

A particle moves along a straight line, with right taken as positive. Its velocity after tt seconds is v(t)=6t2−4t m s−1v(t) = 6t^2 - 4t\ \mathrm{m\,s^{-1}}. Initially it is 3 m to the left of the origin OO.

(a) Determine the displacement x(t)x(t) of the particle.

(b) Determine its displacement after 2 seconds.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Integrate v(t)v(t) with respect to tt, keeping + c+\,c.

  2. Use the initial displacement x(0)x(0) to find cc.

  3. Substitute the time you need and interpret the sign.

Watch out for

  • Using x(0)=3x(0) = 3: "to the left" is negative when right is positive.

  • Reading x(2)=5x(2) = 5 as the distance travelled. It is where the particle is, not how far it has gone.

A particle moves in a straight line with velocity v(t)=3−2t m s−1v(t) = 3 - 2t\ \mathrm{m\,s^{-1}}. Initially its displacement is −4-4 m. Determine x(t)x(t).

x(t) =
Reads asYour answer shows here as maths.

A particle has velocity v(t)=sin⁡(t)v(t) = \sin(t) and starts at the origin. Its displacement is x(t)=−cos⁡(t)+cx(t) = -\cos(t) + c. What is the value of cc?

If you are given the acceleration, integrate twice: once to get the velocity, using v(0)v(0), and again to get the displacement, using x(0)x(0).

Worked example

A ball thrown upwards

  • Complex familiar

A ball is thrown vertically upwards at 14.7 m s−114.7\ \mathrm{m\,s^{-1}} from a point 1.5 m above the ground. Taking upwards as positive, its acceleration is a=−9.8 m s−2a = -9.8\ \mathrm{m\,s^{-2}}.

(a) Determine the velocity v(t)v(t) and the height h(t)h(t) of the ball above the ground after tt seconds.

(b) Determine the maximum height the ball reaches.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Integrate aa to get vv; use v(0)v(0).

  2. Integrate vv to get the displacement; use the initial position.

  3. For a maximum height, solve v=0v = 0 and substitute.

Watch out for

  • Using a=+9.8a = +9.8 with upwards positive: gravity acts downwards.

  • Forgetting the 1.5 m starting height.

  • Giving the time, 1.5 s, when the question asks for the height.

A particle has acceleration a(t)=6t m s−2a(t) = 6t\ \mathrm{m\,s^{-2}}. Its initial velocity is 2 m s−12\ \mathrm{m\,s^{-1}} and its initial displacement is 00 m. Determine its displacement after 1 second.

in m

Common mistake

Each constant has its own initial value

The constant in v(t)v(t) comes from the initial velocity; the constant in x(t)x(t) comes from the initial displacement. "Starts from rest" gives v(0)=0v(0) = 0, and "starts at the origin" gives x(0)=0x(0) = 0. And check whether a constant really equals its initial value: with x(t)=−cos⁡(t)+cx(t) = -\cos(t) + c and x(0)=0x(0) = 0, the constant is 11.

A particle starts from rest at the origin, and its acceleration is a(t)=12t−6a(t) = 12t - 6. Which of these is its displacement?

Choose one answer

Worked example

Will the braking car stop in time?

  • Complex unfamiliar

A car is travelling at 20 m s−120\ \mathrm{m\,s^{-1}} when the driver starts to brake. The driver presses harder and harder, so that tt seconds after braking begins the car's acceleration is a(t)=−2t m s−2a(t) = -2t\ \mathrm{m\,s^{-2}}, until the car stops.

A fallen tree lies across the road 60 m ahead of the car at the moment braking begins. Determine whether the car stops before it reaches the tree, and comment on how reasonable your conclusion is.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Choose the origin and write down the initial values.

  2. Integrate aa for vv, then solve v=0v = 0 for the stopping time.

  3. Integrate vv for xx, and evaluate it at the stopping time.

  4. Compare with the distance available, then judge the model.

Watch out for

  • Giving the stopping time, 252\sqrt{5} s, as the answer instead of the stopping distance.

  • Using the model after t=25t = 2\sqrt{5}: there v<0v < 0, which would mean the car reverses.

  • Using v(0)=0v(0) = 0: the car is moving at 20 m s−120\ \mathrm{m\,s^{-1}} when braking begins.

Exam tip

Answer the question that was asked

Give units, and interpret signs in words: "x(2)=−3x(2) = -3, so the particle is 3 m to the left of OO." Displacement is where the particle is. If it has changed direction, that is not the distance it has travelled. When a question asks when something happens, solve for tt and reject negative times, or times outside the period the model covers.

Summary

  • x(t)=∫v(t) dtx(t) = \int v(t)\,dt and v(t)=∫a(t) dtv(t) = \int a(t)\,dt.

  • Use x(0)x(0) for the constant in x(t)x(t) and v(0)v(0) for the constant in v(t)v(t). "From rest" means v(0)=0v(0) = 0.

  • Substitute properly: a constant is not always equal to its initial value.

  • Displacement is a signed position, not the distance travelled.

  • Answer in context with units, and stay within the times the model applies to.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 7 of 80% read

Save your progress with a free account