Lesson 7: Displacement from velocity and acceleration
Will the braking car stop in time?
SkillDisplacement from acceleration
Worked example
A car is travelling at when the driver starts to brake. The driver presses harder and harder, so that seconds after braking begins the car's acceleration is , until the car stops.
A fallen tree lies across the road 60 m ahead of the car at the moment braking begins. Determine whether the car stops before it reaches the tree, and comment on how reasonable your conclusion is.
Step 1: Set up the motion
Measure displacement from where braking begins, so and .
Step 2: Find the velocity
. From , , so .
Step 3: Find when the car stops
: , so s, taking .
The model only holds until the car stops. After that the car stays still: it does not start reversing, even though goes negative.
Step 4: Find the displacement
. From , .
Step 5: Find the stopping distance
. Without a calculator you can still compare with 60: , which is true.
Step 6: Decide, then judge the conclusion
, so the car stops about 0.4 m short of the tree. That margin is tiny. The tree is 60 m away when braking begins, so reaction time has already elapsed and must not be added to this stopping distance. Weaker braking than the model assumes, for example on a wet road, could use up the small margin and cause a collision.
Answer
Yes, but only just: the car stops after m, about 0.4 m short of the tree. Weaker braking, for example on a wet road, could mean a collision.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Choose the origin and write down the initial values.
Integrate for , then solve for the stopping time.
Integrate for , and evaluate it at the stopping time.
Compare with the distance available, then judge the model.
Watch out for
Giving the stopping time, s, as the answer instead of the stopping distance.
Using the model after : there , which would mean the car reverses.
Using : the car is moving at when braking begins.