Lesson 7 of 7 · 18 min
Rates of change in periodic models
Differentiate sinusoidal models of tides, wheels, springs and temperatures to find and interpret rates of change, the fastest rates and when they happen, with and without technology.
What you will be able to do
- Differentiate models of the form and and interpret the derivative as a rate, with units.
- Find when a periodic quantity changes fastest, and explain why that happens at the mean level.
- Solve rate problems in context with exact values (Paper 1) or a graphics calculator in radian mode (Paper 2).
Boat ramps, marina gates and harbour pilots all work around the tide. A skipper doesn't only want to know how deep the water is; they want to know whether it is rising or falling, and how fast. That is a derivative.
Periodic quantities are modelled with sine and cosine, and their rates of change come straight from the chain rule: if , then .
The mass oscillates with metres. Scrub through time: the velocity is zero at the ends of the motion and largest, 0.8 m/s, as the mass passes through the centre.
Key idea
Rates in a sinusoidal model
For or :
- the rate of change has the same period, and a maximum size of ;
- the rate is zero at the maximum and minimum values of ;
- the rate is largest in size when passes through its mean level , rising or falling.
Give rates with units of output per input, such as metres per hour, and say whether the quantity is increasing or decreasing.
Depth of water at a jetty, metres, hours after midnight. The steepest parts of the curve are where it crosses the mean level, 3 m.
Worked example
How fast is the tide changing?
The depth of water at a jetty hours after midnight is modelled by
(a) Find .
(b) Find the exact rate at which the depth is changing at 2 am, and interpret it.
(c) Find the times during the day when the depth is decreasing fastest, and that rate.
Step 1: (a) Differentiate with the chain rule
The inside is , whose derivative is . The constant 3 differentiates to 0.
Step 2: (b) Substitute t = 2
At 2 am the depth is decreasing at metres per hour: the tide is going out.
Step 3: (c) Find when the rate is most negative
is most negative when , so or , giving or .
For , the angle runs from 0 to , so there are two solutions.
Step 4: (c) State the rate and interpret
. The depth falls fastest at 3 am and 3 pm, at metres per hour. At those times m, the mean level.
Try it yourself first, then check the working one step at a time.
Answer
(a) . (b) m/h: the depth is decreasing. (c) At 3 am and 3 pm, at m/h.
Method
Differentiate the model with the chain rule.
Substitute the time and use exact values, then interpret the sign.
For the fastest rate, make the trigonometric factor of the derivative and solve for every time in the domain.
Watch out for
Forgetting the factor from the chain rule gives .
Answering "the depth is ": a derivative is a rate, so say "decreasing at 0.68 m/h".
For the jetty model , at what rate is the depth changing at 8 am? Give the exact value in metres per hour.
A mass on a spring has displacement metres after seconds. What is its greatest speed?
Worked example
How fast does a Ferris wheel rider rise?
A Ferris wheel on the South Bank has radius 18 m and its centre is 20 m above the ground. It turns at a constant rate, once every 2 minutes. A rider boards at the lowest point, and their height above the ground seconds later is
(a) Show that .
(b) Find the rider's greatest rate of rise and where they are on the wheel at that moment.
(c) For how many seconds in each revolution is the rider rising at more than 0.5 metres per second? Give your answer correct to one decimal place.
Step 1: (a) Differentiate
Step 2: (b) Maximise the rate
The greatest value of is 1, at , that is s. The greatest rate of rise is m/s.
m, so the rider is level with the centre of the wheel, a quarter of a turn after boarding.
Step 3: (c) Set up the inequality
Step 4: (c) Solve the equation with technology
In radian mode, , so on the boundary times are
Sine takes the same value at and , and when . Between and the sine is negative, so the rider is descending.
Step 5: (c) Find the length of time
s
Try it yourself first, then check the working one step at a time.
Answer
(a) Shown above. (b) The greatest rate of rise is m/s, 30 s after boarding, when the rider is level with the centre, 20 m up. (c) About 38.6 seconds in each revolution.
Method
Differentiate the height model with the chain rule.
The rate is greatest when its sine or cosine factor is 1.
For "how long", solve the equality with technology, find both boundary times in one period, and subtract.
Watch out for
Using degree mode for .
Giving only : the question asks for the length of an interval of time.
The temperature in Toowoomba on a spring day is modelled by °C, where is hours after midnight. Find the rate of change of temperature at 1 pm, correct to two decimal places.
Common mistake
Context slips
- Degree mode. Every model here has inside a radian angle. A calculator in degree mode gives nonsense rates.
- Rate versus value. "How fast" asks for the derivative; "how deep" or "how high" asks for the function.
- Sign without meaning. A rate of m/h needs words: the depth is decreasing at 0.68 metres per hour.
Exam tip
Communicate the answer
Finish a context question with a sentence that includes the time, the rate with its units, and whether the quantity is increasing or decreasing. For "when is it changing fastest", state the times and justify them: the derivative is a sine or cosine whose size is greatest when it equals .
Summary
For , ; for cosine, .
The greatest rate of change has size , and happens when the quantity passes through its mean level.
The rate is zero at the maximum and minimum values.
Use radians, give units, and interpret the sign in context.
In Paper 2, solve equations such as on the calculator and report every solution in the domain.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.