Lesson 3 of 8 · 14 min

The complement and addition rules

Use P(A′)=1−P(A)P(A') = 1 - P(A) and the addition rule to find the probabilities of "not", "or" and "at least one" events, from Venn diagrams and probability tables.

What you will be able to do

  • Use the complement rule P(A′)=1−P(A)P(A') = 1 - P(A), including for "at least one" events.
  • Use the addition rule P(A∪B)=P(A)+P(B)−P(A∩B)P(A \cup B) = P(A) + P(B) - P(A \cap B) and its special case for mutually exclusive events.
  • Find unknown probabilities in Venn diagrams and probability tables.

The forecast for Brisbane tomorrow says a 70% chance of rain. What's the chance it stays dry? You can say 30% without thinking. That instinct is the complement rule, and this lesson makes it, and its partner the addition rule, precise.

Key idea

The complement rule

P(A′)=1−P(A)P(A') = 1 - P(A)

The syllabus also writes this as P(A‾)=1−P(A)P(\overline{A}) = 1 - P(A). It works because AA and A′A' are mutually exclusive and together make up the whole sample space, so P(A)+P(A′)=P(ξ)=1P(A) + P(A') = P(\xi) = 1.

The probability that a particular flight from Brisbane to Sydney departs on time is 0.82. What is the probability that it does not depart on time?

The complement rule is the fastest route to any "at least one" question. The opposite of "at least one six" is "no sixes at all", which is usually much easier to count or calculate:

P(at least one)=1−P(none).P(\text{at least one}) = 1 - P(\text{none}).

Worked example

At least one six

  • Simple familiar
  • Technology free

Two fair six-sided dice are rolled. Find the probability that at least one die shows a six.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Rewrite "at least one" as 1−P(none)1 - P(\text{none}).

  2. Find P(none)P(\text{none}), then subtract from 1.

Watch out for

  • 16+16=1236\frac{1}{6} + \frac{1}{6} = \frac{12}{36} counts (6,6)(6, 6) twice.

  • Answering 2536\frac{25}{36}, the probability of no sixes, and forgetting to subtract from 1.

Interactive

Why the addition rule subtracts

P(A)=0.45P(A) = 0.45 and P(B)=0.4P(B) = 0.4, but P(A∪B)=0.3+0.15+0.25=0.7P(A \cup B) = 0.3 + 0.15 + 0.25 = 0.7, not 0.850.85. Adding P(A)P(A) and P(B)P(B) counts the overlap, 0.15, twice.

Key idea

The addition rule

For any events AA and BB,

P(A∪B)=P(A)+P(B)−P(A∩B).P(A \cup B) = P(A) + P(B) - P(A \cap B).

If AA and BB are mutually exclusive, P(A∩B)=0P(A \cap B) = 0 and the rule simplifies to P(A∪B)=P(A)+P(B)P(A \cup B) = P(A) + P(B).

For events AA and BB, P(A)=0.55P(A) = 0.55, P(B)=0.35P(B) = 0.35 and P(A∪B)=0.7P(A \cup B) = 0.7. Find P(A∩B)P(A \cap B).

A probability table (a two-way table of probabilities) holds the same four regions as a two-event Venn diagram. Each row and column adds to its total, and the grand total is 1. It is often the quickest way to fill in missing values.

The Venn diagram above as a probability table.
ProbabilityBBB′B'Total
AA0.150.300.45
A′A'0.250.300.55
Total0.400.601

Worked example

Using the addition rule to fill in a Venn diagram

  • Simple familiar
  • Technology free

For events AA and BB, P(A)=0.45P(A) = 0.45, P(B)=0.3P(B) = 0.3 and P(A∪B)=0.6P(A \cup B) = 0.6.

(a) Find P(A∩B)P(A \cap B).

(b) Show the probability of each region on a Venn diagram.

(c) Find P(A∩B′)P(A \cap B') and P(A′∩B′)P(A' \cap B').

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Use the addition rule to find whichever of P(A)P(A), P(B)P(B), P(A∩B)P(A \cap B), P(A∪B)P(A \cup B) is missing.

  2. Fill in the overlap first, then the "only" regions, then the outside.

  3. Check that the regions add to 1.

Watch out for

  • Putting 0.45 in the "AA only" region: P(A)P(A) includes the overlap.

  • Assuming P(A∩B)=P(A)P(B)P(A \cap B) = P(A)P(B) without being told the events are independent.

For events AA and BB, P(A)=0.6P(A) = 0.6, P(B)=0.3P(B) = 0.3 and P(A∩B)=0.1P(A \cap B) = 0.1. Find P(A′∩B′)P(A' \cap B'), the probability of neither event.

Common mistake

A probability over 1 is a warning

If P(A)=0.7P(A) = 0.7 and P(B)=0.5P(B) = 0.5, then P(A)+P(B)=1.2P(A) + P(B) = 1.2, which is impossible for P(A∪B)P(A \cup B). These events must overlap, by at least 1.2−1=0.21.2 - 1 = 0.2, so they can't be mutually exclusive. Whenever a sum of probabilities passes 1, look for an overlap you haven't subtracted.

Exam tip

Show the rule

On Paper 1, write the rule, substitute, then simplify: "P(A∪B)=P(A)+P(B)−P(A∩B)=0.6+0.3−0.1=0.8P(A \cup B) = P(A) + P(B) - P(A \cap B) = 0.6 + 0.3 - 0.1 = 0.8". Keep fractions exact. A labelled Venn diagram or probability table earns method marks even if an arithmetic slip costs you the answer.

Summary

  • P(A′)=1−P(A)P(A') = 1 - P(A), also written P(A‾)=1−P(A)P(\overline{A}) = 1 - P(A).

  • For "at least one", use 1−P(none)1 - P(\text{none}).

  • P(A∪B)=P(A)+P(B)−P(A∩B)P(A \cup B) = P(A) + P(B) - P(A \cap B); subtract the overlap so it is counted once.

  • For mutually exclusive events, P(A∪B)=P(A)+P(B)P(A \cup B) = P(A) + P(B).

  • A Venn diagram of probabilities and a probability table hold the same four regions, and each adds to 1.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 80% read

Save your progress with a free account