Lesson 6 of 8 · 18 min

Circles

Recognise the equation of a circle, read its centre and radius (completing the square when needed), write and sketch circles, and use them to solve problems.

What you will be able to do

  • Explain why x2+y2=r2x^2 + y^2 = r^2 is a circle with centre the origin and radius rr.
  • Identify the centre (h,k)(h, k) and radius rr of (x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2, and write the equation of a given circle.
  • Complete the square in x and in y to find the centre and radius from expanded form.
  • Sketch circles and solve problems involving them, with and without technology.

A garden sprinkler throws water exactly 5 m in every direction, so the edge of the wet patch is a circle: every point on it is the same distance from the sprinkler. That single property — a fixed distance from a fixed point — is all you need to find the equation of a circle.

The point (3,4)(3, 4) is on the circle because 32+42=25=523^2 + 4^2 = 25 = 5^2. The same triangle works for every point (x,y)(x, y) on the circle.

Take any point (x,y)(x, y) on a circle of radius rr centred at the origin OO. The horizontal and vertical distances from OO are the legs of a right-angled triangle, and the radius is its hypotenuse. By Pythagoras, x2+y2=r2x^2 + y^2 = r^2. Every point on the circle satisfies this equation, and every point that satisfies it is on the circle.

Key idea

Circle centred at the origin

x2+y2=r2x^2 + y^2 = r^2

is the circle with centre (0,0)(0, 0) and radius rr. For example, x2+y2=16x^2 + y^2 = 16 has radius 16=4\sqrt{16} = 4 and crosses the axes at (±4,0)(\pm 4, 0) and (0,±4)(0, \pm 4).

Now move the centre to (h,k)(h, k). The horizontal and vertical distances from the centre to (x,y)(x, y) become x−hx - h and y−ky - k, and Pythagoras gives the general equation.

Key idea

Circle with centre (h, k) and radius r

(x−h)2+(y−k)2=r2,r>0(x - h)^2 + (y - k)^2 = r^2, \quad r > 0

The centre is (h,k)(h, k) and the radius is rr. This equation is on the QCAA formula book, under graph equations.

Read the centre with the signs reversed from the brackets: (x+2)2=(x−(−2))2(x + 2)^2 = (x - (-2))^2, so h=−2h = -2.

Interactive

Move and resize a circle

A circle is not a function, so the explorer draws it as two functions: the top half y=k+r2−(x−h)2y = k + \sqrt{r^2 - (x - h)^2} and the bottom half y=k−r2−(x−h)2y = k - \sqrt{r^2 - (x - h)^2}. Watch the signs in the equation as you move the centre.

Quick check

2 marks

Consider the circle (x+2)2+(y−5)2=49(x + 2)^2 + (y - 5)^2 = 49.

Part (a).

State the coordinates of the centre.

1 mark
Part (b).

State the radius.

1 mark

Common mistake

Signs, and r versus r²

  • The centre's coordinates have the opposite signs to the numbers in the brackets: (x−4)2+(y+1)2=9(x - 4)^2 + (y + 1)^2 = 9 has centre (4,−1)(4, -1).
  • The right-hand side is r2r^2. For (x−1)2+y2=20(x - 1)^2 + y^2 = 20 the radius is 20=25\sqrt{20} = 2\sqrt{5}, not 2020.
  • If the right-hand side works out negative, there are no points at all — the equation is not a circle.

Expand (x−3)2+(y+2)2=25(x - 3)^2 + (y + 2)^2 = 25 and collect terms, and you get

x2+y2−6x+4y−12=0x^2 + y^2 - 6x + 4y - 12 = 0

Exam questions often give a circle in this expanded form. To find its centre and radius, reverse the expansion by completing the square, once in xx and once in yy. The clue that it is a circle: x2x^2 and y2y^2 have the same coefficient and there is no xyxy term.

Worked example

Find the centre and radius of x2+y2−6x+4y−12=0x^2 + y^2 - 6x + 4y - 12 = 0

  • Simple familiar
  • Technology free

Find the centre and radius of the circle x2+y2−6x+4y−12=0x^2 + y^2 - 6x + 4y - 12 = 0.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Group the x terms and the y terms, with the constant on the right.

  2. Complete the square in x and in y.

  3. Move the constants to the right-hand side.

  4. Read the centre (signs reversed) and take the square root for the radius.

Watch out for

  • Adding 99 and 44 to one side only, giving (x−3)2+(y+2)2=12(x - 3)^2 + (y + 2)^2 = 12.

  • Giving the centre as (−3,2)(-3, 2).

Quick check

2 marks

The circle x2+y2+8x−2y+8=0x^2 + y^2 + 8x - 2y + 8 = 0 can be written in the form (x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2.

Part (a).

Find the coordinates of the centre.

1 mark
Part (b).

Find the radius.

1 mark

To write the equation of a circle you need its centre and its radius:

  • Given the centre and a point on the circle, the radius is the distance between them, r2=(x2−x1)2+(y2−y1)2r^2 = (x_2 - x_1)^2 + (y_2 - y_1)^2.
  • Given the ends of a diameter, the centre is their midpoint and the radius is half their distance apart.

Worked example

Find the circle with diameter from A(−1,2)A(-1, 2) to B(5,10)B(5, 10)

  • Complex familiar
  • Technology free

The points A(−1,2)A(-1, 2) and B(5,10)B(5, 10) are the ends of a diameter of a circle. Find the equation of the circle.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Centre = midpoint of the diameter.

  2. r² = squared distance from the centre to either end.

  3. Substitute into (x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2 and check with the other end.

Watch out for

  • Using the whole diameter as the radius: (x−2)2+(y−6)2=100(x - 2)^2 + (y - 6)^2 = 100.

  • Subtracting instead of adding when finding the midpoint.

Find the equation of the circle with centre (1,−3)(1, -3) that passes through the point (4,1)(4, 1).

Reads asYour answer shows here as maths.

Solving (x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2 for yy gives

y=k±r2−(x−h)2y = k \pm \sqrt{r^2 - (x - h)^2}

The ±\pm is why a circle is not a function. The ++ sign alone gives the top half, which is a function: y=9−x2y = \sqrt{9 - x^2} is the upper semicircle of x2+y2=9x^2 + y^2 = 9, with domain [−3,3][-3, 3] and range [0,3][0, 3]. Semicircles model arches, tunnels and domes.

Worked example

Will the truck fit through the tunnel?

  • Complex unfamiliar
  • Technology free

A road tunnel has a semicircular cross-section of radius 5 m, with the road along its diameter. Place the origin at the centre of the road, with xx measured across the road and yy upwards, in metres.

(a) Write an equation for the tunnel's roof, with its domain. (b) A truck 3 m wide and 4.2 m tall drives in the left lane with its right side on the centre line. Will it fit? (c) What is the tallest 3 m wide truck that can drive in one lane in this way?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Set up coordinates and write the circle (or semicircle) equation.

  2. Identify the critical point from the geometry — here, the corner furthest from the centre.

  3. Substitute to compare heights, or test whether the point is inside the circle.

  4. Answer in context, and comment on what is realistic.

Watch out for

  • Checking the centre of the road (x=0x = 0, height 5 m) instead of the truck's outer edge.

  • Testing the point (3,4.2)(3, 4.2) but forgetting that the truck sits in one lane, not across the middle.

Sketching by hand

Find the centre and radius (completing the square if needed). Plot the centre, mark the four points rr units left, right, above and below it, and draw a smooth round curve through them. Label the centre and the radius, and any axis intercepts the question asks for.

With technology

Graphics calculators graph functions, so enter both halves, y=k+r2−(x−h)2y = k + \sqrt{r^2 - (x - h)^2} and y=k−r2−(x−h)2y = k - \sqrt{r^2 - (x - h)^2}, or use a circle (conics) mode if yours has one. Choose a square window with equal scales on both axes, or the circle will look like an oval.

Summary

  • x2+y2=r2x^2 + y^2 = r^2 is a circle with centre (0,0)(0, 0) and radius rr — Pythagoras for every point on it.

  • (x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2 has centre (h,k)(h, k) and radius rr; read the centre with reversed signs.

  • The right-hand side is r², so take its square root for the radius.

  • From expanded form, complete the square in xx and in yy, then move the constants to the right.

  • To write an equation, find the centre and r2r^2: use the midpoint of a diameter or the distance to a known point.

  • A circle is not a function, but its top half y=k+r2−(x−h)2y = k + \sqrt{r^2 - (x - h)^2} is.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 80% read

Save your progress with a free account