Lesson 8 of 8 · 18 min
Modelling with cubic functions
Build cubic models from a situation or from data, choose a sensible domain, and use technology to find maximums and solve problems in context.
What you will be able to do
- Write a cubic model for a volume from a diagram, and state a sensible domain.
- Use technology to find maximum values and to solve equations in context.
- Find a cubic model from its zeros and one other data point.
- Interpret solutions in context and judge whether they are reasonable.
Cut equal squares from the corners of a 30 cm by 20 cm sheet of cardboard, fold up the sides, and you have an open box. Tiny squares give a wide, shallow tray. Big squares give a deep but narrow box. Somewhere in between is the box that holds the most, and a cubic function finds it.
Cut a square of side cm from each corner (shaded), then fold up along the dashed lines.
Folding up the flaps makes a box of height . Cutting a square from each end of the 30 cm side leaves a length of , and the width is . Volume is length times width times height:
That is a cubic in factored form. Expanded, it is .
Key idea
The domain comes from the context
Every length must be positive: , (so ) and (so ). All three hold when
Outside this domain the rule still gives numbers, but they do not describe a real box.
Trace along the curve to read the volume for each cut size. Change the sheet length : how does the best cut change?
For the box made from the 30 cm by 20 cm sheet, find the volume when .
Worked example
The biggest box from a sheet of card
An open box is made from a 30 cm by 20 cm sheet of card by cutting a square of side cm from each corner and folding up the sides.
(a) Show that the volume of the box is cm³, and state the domain.
(b) Use technology to find the maximum volume and the value of that gives it.
(c) A customer wants a box with a volume of exactly 1000 cm³ that is as deep as possible. What size squares should be cut?
Step 1: (a) Find the dimensions
The height is . A square of side comes off each end of every side, so the length is and the width is .
Step 2: (a) Write the volume and domain
Volume is length × width × height, so . Every length must be positive: , and , so the domain is .
Step 3: (b) Find the maximum with technology
Graph for and use the maximum tool: the maximum is at , where .
Restrict the window to the domain so the calculator finds the maximum of the real box, not a turning point outside it.
Step 4: (c) Solve V = 1000
Using technology to solve gives , or . Reject , which is outside the domain.
Check exactly: .
Step 5: (c) Choose the deeper box
The height of the box is , so the deeper of the two boxes has : it measures 20 cm by 10 cm by 5 cm.
Try it yourself first, then check the working one step at a time.
Answer
(a) for . (b) The maximum volume is about cm³, when cm. (c) Cut squares of side 5 cm.
Method
Draw the net and write each dimension in terms of x.
Multiply for the volume, and use positive lengths to find the domain.
Use technology for the maximum and to solve , within the domain.
Interpret each answer in context and reject impossible solutions.
Watch out for
Writing the length as : a square comes off both ends.
Accepting , which would need a negative width.
Why is not a sensible input for the box model ?
Not every model comes from a diagram. Often you know where a quantity is zero and one other measurement. Then write the factored form, , and use the measurement to find .
Worked example
Model the cross-section of a creek
A creek is 20 m wide. Its depth metres at a distance metres from the left bank is modelled by
A depth sounding 10 m from the left bank reads 2.5 m.
(a) Find the value of .
(b) Use technology to find the greatest depth of the creek, and how far from the left bank it occurs.
(c) A small boat needs water at least 2 m deep. How wide is the strip of creek it can use?
The creek bed is drawn as , below the water surface .
Step 1: (a) Substitute the sounding
At , :
Step 2: (b) Find the maximum with technology
Graph for and use the maximum tool: the greatest depth is about m, about m from the left bank.
The model has a turning point near as well, but that is outside the creek. Restrict the window to the domain.
Step 3: (c) Solve d(x) = 2
Using technology, when , or . The last is outside the domain, so reject it.
Step 4: (c) Find the width
The water is at least 2 m deep for , a strip m wide.
Step 5: Check the answers are reasonable
The greatest depth, 2.59 m, is a little more than the 2.5 m sounding, and it is closer to the left bank, where the model's bank is steeper. A strip just under 9 m wide out of 20 m is plausible.
Try it yourself first, then check the working one step at a time.
Answer
(a) . (b) The greatest depth is about m, about m from the left bank. (c) The strip is about m wide.
Method
Substitute the known data point to find the unknown constant.
Use technology for the maximum and to solve d(x) = c on the domain.
Reject solutions outside the domain and answer in context.
Watch out for
Including the solution , which is outside the creek.
Rounding or the intermediate solutions too early.
The creek model is , where is the depth in metres at metres from the left bank. Find the depth 15 m from the left bank.
Modelling with a cubic
Define the variable
Say what x and y stand for, with units.
Write the rule
From the geometry of the situation, or from known zeros and one more data point.
State the domain
Which values of x make sense in the context?
Solve or optimise
Substitute, solve , or find a maximum or minimum, with technology where needed.
Answer in context
Give units and sensible rounding, and reject solutions outside the domain.
Common mistake
Keep only solutions that make sense
Technology finds every solution of the equation, including ones outside the domain. For the box, has solutions , and . The last one is not a box at all, so reject it and say why.
Exam tip
Communicate the model
In a modelling question, show the rule you are using, the domain, and the equation you solved or the feature you found with technology. Then answer the question that was asked, in a sentence with units: "The greatest volume is about cm³, when the squares have side cm."
Summary
Build a cubic model from the situation (length × width × height for a box) or from known zeros and one data point.
The context sets the domain. Every length, time or amount must make sense.
Use technology to find maximums and minimums and to solve , then round sensibly.
Answer in context with units, and reject solutions outside the domain.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.