Lesson 8: Modelling with cubic functions
Model the cross-section of a creek
SkillsModelling with cubicsFinding the rule of a cubic
Worked example
A creek is 20 m wide. Its depth metres at a distance metres from the left bank is modelled by
A depth sounding 10 m from the left bank reads 2.5 m.
(a) Find the value of .
(b) Use technology to find the greatest depth of the creek, and how far from the left bank it occurs.
(c) A small boat needs water at least 2 m deep. How wide is the strip of creek it can use?
Step 1: (a) Substitute the sounding
At , :
Step 2: (b) Find the maximum with technology
Graph for and use the maximum tool: the greatest depth is about m, about m from the left bank.
The model has a turning point near as well, but that is outside the creek. Restrict the window to the domain.
Step 3: (c) Solve d(x) = 2
Using technology, when , or . The last is outside the domain, so reject it.
Step 4: (c) Find the width
The water is at least 2 m deep for , a strip m wide.
Step 5: Check the answers are reasonable
The greatest depth, 2.59 m, is a little more than the 2.5 m sounding, and it is closer to the left bank, where the model's bank is steeper. A strip just under 9 m wide out of 20 m is plausible.
Answer
(a) . (b) The greatest depth is about m, about m from the left bank. (c) The strip is about m wide.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
The creek bed is drawn as , below the water surface .
Method
Substitute the known data point to find the unknown constant.
Use technology for the maximum and to solve d(x) = c on the domain.
Reject solutions outside the domain and answer in context.
Watch out for
Including the solution , which is outside the creek.
Rounding or the intermediate solutions too early.