Lesson 11: Measuring ΔH by calorimetry
Heat of combustion of ethanol with a spirit burner
SkillsHeat and calorimetryFuels and energy in society
Worked example
A spirit burner containing ethanol, , is used to heat 200.0 g of water in a copper can.
| Measurement | Value |
|---|---|
| Mass of burner before | 152.364 g |
| Mass of burner after | 151.424 g |
| Initial water temperature | 20.4 °C |
| Final water temperature | 42.6 °C |
(a) Calculate the heat of combustion of ethanol in .
(b) The data value is . Calculate the percentage error and suggest the main reason for it.
Step 1: Heat gained by the water
.
Step 2: Moles of ethanol burned
Mass burned . , so .
Step 3: Heat of combustion
Step 4: Percentage error
Step 5: Explain the error
The measured value is less negative, so a third of the heat released never reached the water. Most was lost to the air around the flame and to the can; some ethanol may also have burned incompletely (soot on the can) or evaporated from the wick.
Answer
(a) (b) 33 %, mainly because heat was lost to the surroundings rather than absorbed by the water.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
for the water.
Moles of fuel from the burner's loss of mass.
; compare with the data value.
Watch out for
Using the mass of ethanol (0.940 g) as the in . That is the water.
Saying the error is "human error". Name the specific heat losses.