Lesson 3: Microscopy, magnification and field of view
Estimate the size of a cheek cell from the field of view
SkillMagnification and field of view
Worked example
A student uses a microscope with a eyepiece and objectives of , and . With the objective, a clear ruler shows that the field of view is 4.5 mm across. On the highest power, about 8 cheek cells fit across the diameter of the field.
(a) Calculate the total magnification on the highest power. (b) Calculate the field of view diameter on the highest power, in micrometres. (c) Estimate the diameter of one cheek cell.
Step 1: Total magnification
Step 2: Convert the measured field to micrometres
, at .
Step 3: Scale the field to the new magnification
Ten times the magnification shows a tenth of the diameter.
Step 4: Divide by the number of cells
The count of cells is an estimate, so give the answer to two significant figures.
Step 5: Check it is reasonable
Cheek cells are typically 50–60 µm across, so the estimate is sensible.
Answer
(a) . (b) . (c) About .
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Total magnification = eyepiece × objective.
Convert the measured field to µm, then scale it: FOV_new = FOV_old × (old ÷ new magnification).
Cell size ≈ FOV ÷ number of cells across, to a sensible number of significant figures.
Watch out for
Multiplying by , which makes the field bigger at higher power.
Dividing 4.5 mm by 8 without scaling the field to the high-power magnification first.