General Mathematics · Unit 3 · Topic 4

Growth and decay in sequences

Generate arithmetic and geometric sequences by recursion, show them in tables and graphs, use the nth-term rules, and model simple interest, taxi fares, depreciation and population growth.

  • 7 lessons
  • 1 h 55 min of lessons
  • 13 worked examples
  • 11 hours in the syllabus
0 of 7

Start here

Arithmetic sequences and recursion

Lesson 1 of 7 · 14 min

Start the topic

Lessons

7
  1. Arithmetic sequences and recursion (up next)

    Use a recursive rule and a first term to generate an arithmetic sequence, find its common difference, and write the rule for a sequence you are given.

  2. Tables and graphs of arithmetic sequences

    Show an arithmetic sequence as a table and as a graph of separate points, and recognise it as a model of linear growth or decay in a discrete situation.

  3. The rule for the nth term

    Use tn=t1+(n−1)dt_n = t_1 + (n - 1)d to find any term of an arithmetic sequence, the term number of a given value, and the first term and common difference from two known terms.

  4. Linear models: interest, fares and depreciation

    Model a simple interest loan or investment, a taxi fare and straight-line depreciation as arithmetic sequences, and answer questions about them in context.

  5. Geometric sequences and recursion

    Generate a geometric sequence from tn+1=rtnt_{n+1} = rt_n and a first term, find the common ratio, and show the terms in a table and graph as exponential growth or decay.

  6. The rule for the nth term of a geometric sequence

    Use tn=t1rn−1t_n = t_1r^{n-1} to find any term of a geometric sequence, find the common ratio from two terms, and find when a term first passes a target using a table, technology or trial.

  7. Exponential models: populations and diminishing value

    Model bacterial and population growth and diminishing-value depreciation with geometric sequences, find when a target is reached, and compare diminishing-value with straight-line depreciation.

  8. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

A taxi fare that goes up by the same amount every kilometre. A car that loses a fifth of its value every year. A colony of bacteria that doubles every hour. Each of these changes in steps, not smoothly, and each step follows the same rule. A list of numbers made this way is a sequence.

In this topic you'll meet the two sequences that model most step-by-step change. In an arithmetic sequence you add the same amount each step, so the terms grow or decay in a straight line. In a geometric sequence you multiply by the same amount each step, so the terms grow or decay exponentially. You'll generate both by recursion (each term from the one before), show them in tables and graphs, and use the rules tn=t1+(n−1)dt_n = t_1 + (n - 1)d and tn=t1rn−1t_n = t_1 r^{n-1} to jump straight to any term.

Then you'll put them to work: simple interest loans and investments, taxi fares, straight-line and diminishing-value depreciation, and growing populations. These ideas lead straight into Unit 4, where compound interest, loans and annuities are all built from geometric sequences.

Before you start

Builds on Consumer arithmetic and Linear equations and their graphs.

  • Percentage increase and decrease, and multiplying by a factor such as 1.051.05 or 0.850.85 (Consumer arithmetic, Unit 1).
  • Simple interest, I=PinI = Pin (Consumer arithmetic, Unit 1).
  • Plotting points on a Cartesian plane and recognising a straight line with gradient mm (Linear equations and their graphs, Unit 1).
  • Substituting into a formula and using powers on a scientific calculator.

What QCAA says you need to know8 dot points

The arithmetic sequence

5 hours

The geometric sequence

6 hours

Subject matter from the General Mathematics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Arithmetic or geometric?

    Test for a common difference or a common ratio, and decide which kind of sequence (if either) a list, table, graph or context describes.

    Practise
  • Generating arithmetic sequences

    Use a recursive rule $t_{n+1} = t_n + d$ with a first term $t_1$ to list terms, and write the rule for a given sequence.

    Practise
  • Arithmetic tables and graphs

    Show an arithmetic sequence as a table and as unjoined points on a graph, and recognise the straight-line pattern of linear growth or decay.

    Practise
  • The arithmetic nth-term rule

    Use $t_n = t_1 + (n - 1)d$ to find any term, the term number of a given value, or the first term and difference from two terms.

    Practise
  • Linear growth and decay models

    Model simple interest, taxi fares and straight-line depreciation with arithmetic sequences and answer questions in context.

    Practise
  • Generating geometric sequences

    Use a recursive rule $t_{n+1} = rt_n$ with a first term $t_1$ to list terms, and write the rule for a given sequence.

    Practise
  • Geometric tables and graphs

    Show a geometric sequence as a table and a graph, and recognise the curved pattern of exponential growth or decay.

    Practise
  • The geometric nth-term rule

    Use $t_n = t_1 r^{n-1}$ to find any term, and find the common ratio or first term from given terms.

    Practise
  • Exponential growth models

    Model populations, bacteria and percentage growth with geometric sequences, turning a percentage change into a common ratio.

    Practise
  • Diminishing-value depreciation

    Find the value of an asset that loses the same percentage each year, and compare it with straight-line depreciation.

    Practise
  • When is a target reached?

    Find how many steps it takes to reach, pass or fall below a value, using the rule, a table, technology or trial (no logarithms needed).

    Practise

Worked examples13

All 13

Common mistakes

Using nn instead of n−1n - 1

The tenth term of 5,8,11,…5, 8, 11, \ldots is t10=5+9×3=32t_{10} = 5 + 9 \times 3 = 32, not 5+10×35 + 10 \times 3. From t1t_1 to t10t_{10} there are only 9 steps.

Mixing up the term number and the time

If t1t_1 is the purchase price, the value after 5 years is t6t_6, not t5t_5. Write down what tnt_n stands for before you substitute.

Using the percentage as the common ratio

A car losing 15% a year keeps 85% of its value, so r=0.85r = 0.85, not 0.150.15. Growth of 6% gives r=1.06r = 1.06, not 0.060.06 or 66.

Joining the points of a sequence

A sequence only has values at whole-number term numbers. Plot separate points and do not join them, unless the question asks for a line to show the trend.

Calling exponential decay linear

Diminishing-value depreciation loses a smaller dollar amount each year. The differences are not constant, so the sequence is geometric, not arithmetic, even though it is decreasing.

Forgetting the first term in a recursive rule

tn+1=tn−450t_{n+1} = t_n - 450 on its own describes infinitely many sequences. Give the starting value too: tn+1=tn−450t_{n+1} = t_n - 450, t1=6000t_1 = 6000.

Rounding part-way through

Keep full calculator values in a geometric calculation and round only the final answer. Rounding each year's value to the nearest dollar can move the answer by several dollars.

Exam tips

  1. Before using a rule, write a line that says what tnt_n means and what t1t_1 is, e.g. "tnt_n = value at the start of year nn, t1=$32 000t_1 = \$32\,000". Markers look for it.

  2. Write the formula from the formula book, then substitute: t8=2500+(8−1)×120t_8 = 2500 + (8 - 1) \times 120. A wrong answer with a correct substitution still earns method marks.

  3. For "after how many years…" questions, logarithms are not required. Use a table of values (the calculator's table mode or a spreadsheet), or trial and check, and show the two terms either side of the target to justify your answer.

  4. Read "first", "after", "during" and "at the start of" carefully, then answer the question asked: a year number, a term number, or a dollar amount.

  5. Money answers to the nearest cent unless told otherwise; populations and counts to a whole number, rounded sensibly (you can't have 0.4 of a bacterium).

  6. When asked to justify that a model is arithmetic or geometric, show the calculation: at least two equal differences, or at least two equal ratios.

  7. For depreciation comparisons, a table with both methods side by side is the clearest working and makes the crossover year easy to justify.

Where this shows up

  • Taxi and rideshare fares in Brisbane and on the Gold Coast are a flag fall plus a charge per kilometre.

  • The Australian Taxation Office lets businesses depreciate equipment with the prime cost (straight-line) or diminishing-value method.

  • Microbiologists and food-safety inspectors model bacteria that double at regular intervals, which is why food is refrigerated.

  • Simple interest bonds and term deposits pay the same interest every year.

  • Fleet managers decide when to replace vehicles by tracking how their values fall.

  • Ecologists model the spread of cane toads and other invasive species with geometric growth over short periods.

Save your progress with a free account